I’m doing this now for a few files. The evio-lcio conversion is in such a state that I don’t want to start wholesale production at this point.
On Dec 15, 2014, at 4:19 PM, Graf, Norman A. <[log in to unmask]> wrote:
> Hello Luca,
> Exactly what error are you getting?
> You are correct that not everyone should be running their own personal independent conversion.
> We should begin exercising the complete chain of DAQ, writing to tape, running the reconstruction
> and producing the output for analysis. I realize that we don't yet have a formal production reconstruction
> identified, but we should make an effort to set up the full (and as much as possible automatic) production
> chain.
> Norman
>
> -----Original Message-----
> From: [log in to unmask] [mailto:[log in to unmask]] On Behalf Of Luca Colaneri
> Sent: Monday, December 15, 2014 1:04 PM
> To: McCormick, Jeremy I.; hps-software
> Subject: Re: error in running reconstruction
>
> I still have the same error, it can't find the main class EvioToLcio.
>
>
> Do we really need EVERYONE to be able to run the conversion locally?
> Once one is able to do it, can't we just write a script and run the conversion on the farm?
>
>
>
> Il 15/12/14 15:53, McCormick, Jeremy I. ha scritto:
>> Hi,
>>
>> This "hide" business should be unnecessary in the steering file. If you run EvioToLcio with the "-b" option it will suppress the showing of all plots.
>>
>> --Jeremy
>>
>> -----Original Message-----
>> From: [log in to unmask] [mailto:[log in to unmask]] On Behalf Of Luca Colaneri
>> Sent: Monday, December 15, 2014 12:52 PM
>> To: hps-software
>> Subject: Re: error in running reconstruction
>>
>> I've tryed everything i could but it still doesn't work.
>>
>> Since I have only a couple of days left here and I really really need to be able to read the data, could please some of you who has been able to run the conversion convert a couple of runs for me and put it on volatile or somwhere available to the mass?
>>
>> Whoever the savior will be, thank you very much!
>>
>> L.
>>
>>
>> Il 15/12/14 12:58, Graf, Norman A. ha scritto:
>>> Hello Luca,
>>> I would recommend that you update your svn installation, clean and
>>> install the build, then try running using the canonical jar location, viz.:
>>>
>>>> svn up
>>>> mvn clean install -DskipTests
>>>> java -cp
>>>> ~/.m2/repository/org/hps/hps-distribution/3.1-SNAPSHOT/hps-distributi
>>>> on-3.1-SNAPSHOT-bin.jar org.hps.evio.EvioToLcio -x
>>>> ../../../svn/hps_trunk/steering-files/src/main/resources/org/hps/stee
>>>> ring/recon/EngineeringRun2014ECalRecon.lcsim -d HPS-ECalCommissioning
>>>> -n 1000000 hps_003207.evio.1 -DoutputFile=recon-3207 -R 3207
>>> I just did this and am able to run this command. However, there is a
>>> problem with the steering file, since neither EcalHitPlots nor EcalClusterPlots has a setHide method. Here is the output of the above command:
>>>
>>> Mon Dec 15 09:53:41 PST 2014 :: EvioToLcio :: CONFIG :: initializing
>>> EVIO to LCIO converter Mon Dec 15 09:53:41 PST 2014 :: EvioToLcio ::
>>> CONFIG :: using steering file
>>> ../../../svn/hps_trunk/steering-files/src/main/resources/org/hps/steer
>>> ing/recon/EngineeringRun2014ECalRecon.lcsim
>>> Mon Dec 15 09:53:41 PST 2014 :: EvioToLcio :: CONFIG :: set max events
>>> to 1000000 Mon Dec 15 09:53:41 PST 2014 :: EvioToLcio :: CONFIG :: set
>>> steering variable: outputFile=recon-3207 Exception in thread "main" java.lang.RuntimeException: Set method was not found: EcalHitPlots.hide
>>> at org.lcsim.job.JobControlManager.setupDrivers(JobControlManager.java:773)
>>> at org.lcsim.job.JobControlManager.setup(JobControlManager.java:562)
>>> at org.lcsim.job.JobControlManager.setup(JobControlManager.java:512)
>>> at org.hps.evio.EvioToLcio.run(EvioToLcio.java:243)
>>> at org.hps.evio.EvioToLcio.main(EvioToLcio.java:99)
>>>
>>> However, once I comment out the
>>> <hide>true</hide>
>>> snippets in a local copy of the steering file, I am able to run.
>>>
>>> I do encounter a number of IndexOutOfBoundsExceptions along the way,
>>>
>>> SEVERE: Error making ECal hits
>>> java.lang.IndexOutOfBoundsException
>>>
>>> But that's another issue.
>>> Norman
>>>
>>> -----Original Message-----
>>> From: [log in to unmask]
>>> [mailto:[log in to unmask]] On Behalf Of Luca Colaneri
>>> Sent: Monday, December 15, 2014 9:00 AM
>>> To: McCormick, Jeremy I.
>>> Cc: hps-software
>>> Subject: error in running reconstruction
>>>
>>> Hello Jeremy and everybody,
>>> I'm here with Matt trying to make conversion work on my laptot.
>>> Everything looks fine but I always get the same error: it can find the
>>> main class EvioToLcio
>>>
>>> this is the command I run:
>>>
>>> java -cp $jarfile org.hps.evio.EvioToLcio -x
>>> /Users/mac/HPS/hps_trunk/steering-files/src/main/resources/org/hps/ste
>>> ering/recon/EngineeringRun2014ECalRecon.lcsim
>>> -d HPS-ECalCommissioning -n 1000000 hps_003207.evio.1
>>> -DoutputFile=recon-3207 -R 3207
>>>
>>> (the $jarfile links to the proper jar, we checked)
>>>
>>>
>>> Cheers
>>>
>>> L.
>>>
>>> --
>>> Luca Colaneri
>>> Dipartimento di Fisica
>>> Universita' degli Studi di Roma Tor Vergata Via della Ricerca
>>> Scientifica s.n.c. 00133 Roma
>>> +39 06 72594560
>>>
>>> ######################################################################
>>> ##
>>> Use REPLY-ALL to reply to list
>>>
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>> --
>> Luca Colaneri
>> Dipartimento di Fisica
>> Universita' degli Studi di Roma Tor Vergata Via della Ricerca Scientifica s.n.c. 00133 Roma
>> +39 06 72594560
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
> --
> Luca Colaneri
> Dipartimento di Fisica
> Universita' degli Studi di Roma Tor Vergata
> Via della Ricerca Scientifica s.n.c. 00133 Roma
> +39 06 72594560
>
> ########################################################################
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
> ########################################################################
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|