Hi,
sorry for not being able to help much here (trying to get the SVT in shape for shipping). I will try to run again as well sometime today; it was working last week so it’ll be interesting to see.
/Pelle
On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]> wrote:
> Hi Pelle,
> no, not yet, I am stuck...
> I have the same problem (and same behaviour) if I try to run the reconstruction at slac, so I doubt it could be an issue related to the connection to the database.
> Cheers
> Alessandra
>
>
>
>
> On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote:
>
>> Alessandra, did you solve your problem? I think Jeremy added a fix for this?
>>
>> On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>>
>>>
>>> Actually, I can’t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they’ve always been jealous of us..I can’t get to the svn repository either. Here’s the log file for those interested:
>>> <foobar>
>>>
>>>
>>>
>>> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>>>
>>>> So there are definitely TrackerHits in your slcio file…it looks fine to me. I’ll try running some readout.
>>>>
>>>>
>>>> On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>>>
>>>>> hi,
>>>>> you can find the ap2* slcio it here:
>>>>>
>>>>> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
>>>>>
>>>>> can you try to see if you can read it properly? (and there's something in?)
>>>>> thanks!
>>>>>
>>>>>
>>>>>
>>>>> On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> can you point us to the slcio file?
>>>>>>
>>>>>> On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going.
>>>>>>> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file.
>>>>>>> Then, I try to produce a readout file, using the instructions in the
>>>>>>> confluence "Running Readout Simulation" page (lcsim and hps_trunk
>>>>>>> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess),
>>>>>>> and nothing else: the reconstruction ends with Ecal/svt setup info
>>>>>>>
>>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal
>>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map
>>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries
>>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector
>>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker
>>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors
>>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries
>>>>>>> End of file reached
>>>>>>> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed
>>>>>>>
>>>>>>> and the readout file is empty.
>>>>>>> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get
>>>>>>>
>>>>>>> Executed dry run. No events processed!
>>>>>>>
>>>>>>> and again nothing else is done. What am I doing wrong?
>>>>>>> Thanks, cheers
>>>>>>> Alessandra
>>>>>>>
>>>>>>> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail.
>>>>>>>
>>>>>>> ########################################################################
>>>>>>> Use REPLY-ALL to reply to list
>>>>>>>
>>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>>
>>>>>> ########################################################################
>>>>>> Use REPLY-ALL to reply to list
>>>>>>
>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>>
>>>>>
>>>>> ########################################################################
>>>>> Use REPLY-ALL to reply to list
>>>>>
>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>
>>>> ########################################################################
>>>> Use REPLY-ALL to reply to list
>>>>
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>
>>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|