Jeremy, can you take a look at this:
I want to print the conditions using the command line tool. First, I still have to specify a detector
else it fails with "not initialized" errors. More importantly, it appears to be picking up the wrong
collection_id. I tried this also on some older runs where I know it used to work. Did I make a
mistake somewhere? Isn't the command line tool still supposed to give me the same result via its
print command as when we run reconstruction?
llama> java hps.jar -cp hps.org.hps.conditions.cli.CommandLineTool -p ~/jlab_readonly.prop -d HPS-EngRun2015-Nominal-v0 print -r 4900 -t ecal_calibrations
….
--------------------------------------
id: 4
name: ecal_calibrations
runStart: 0
runEnd: 0
tableName: ecal_calibrations
collectionId: 1
updated: 2014-10-29 00:46:35.0
created: 2013-09-30 17:25:21.0
tag: dev
createdBy: jeremym
notes: null
--------------------------------------
ecal_channel_id pedestal noise
221 120.0 10.0
258 120.0 10.0
184 120.0 10.0
304 120.0 10.0
…..
Looking in the mysql db, it should be getting 26:
mysql> select collection_id,run_start,run_end,table_name,notes,tag,updated from conditions;
***
| 0 | 9999 | 1002 | svt_shape_fit_parameters | Shape fit calibration from run hpssvt_000738 | eng_run | 2015-04-22 21:49:18 |
| 0 | 9999 | 1003 | svt_shape_fit_parameters | Shape fit calibration from run hpssvt_000738 | eng_run | 2015-04-22 22:12:17 |
| 4832 | 9999 | 26 | ecal_calibrations | no-beam pedestals after all hardware changes | pass0 | 2015-04-23 07:06:42 |
+-----------+---------+---------------+-----------------------------------+-----------------------------------------------------------------------------------+----------+---------------------+
294 rows in set (0.00 sec)
mysql> select * from ecal_calibrations where collection_id=26;
+-------+-----------------+---------------+----------+-------+
| id | ecal_channel_id | collection_id | pedestal | noise |
+-------+-----------------+---------------+----------+-------+
| 11051 | 1 | 26 | 109.772 | 2.531 |
| 11052 | 2 | 26 | 87.091 | 2.556 |
| 11053 | 3 | 26 | 107.977 | 2.462 |
| 11054 | 4 | 26 | 106.453 | 2.377 |
….
Any Ideas?
-Nathan
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|