Sorry! I was going to reply earlier because I thought I knew what the
problem was, but I didn't have time to check. Very busy.
I'm also sorry that Matt apparently broke all the recon steering files.
I fixed them.
I tested with the following commands, using the current SVN trunk (I
removed ConditionsDriver from HPS2014ReadoutToLcio.lcsim):
1)
java -jar hps-distribution-3.3.1-SNAPSHOT-bin.jar
steering/readout/HPS2014ReadoutToLcio.lcsim -i
filtered_EngRun2015-Nominal-v1.lcsim -DoutputFile=filtered_readout
java -jar hps-distribution-3.3.1-SNAPSHOT-bin.jar
steering/recon/HPS2014OfflineRecon.lcsim -i filtered_readout.slcio
-DoutputFile=filtered_recon
2)
java -jar hps-distribution-3.3.1-SNAPSHOT-bin.jar
steering/recon/HPS2014OfflineNoPileupRecon.lcsim -i
ap2.2gev075mev_readout_EngRun2015-Nominal-v1.slcio
-DoutputFile=nopileup_recon
Hopefully these will work for you too.
On Thu, 30 Apr 2015, Alessandra Filippi wrote:
> Hi,
> I copied my files at SLAC for a check, you can find them in the directory
> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/tests. I am using detector
> EngRun2015-Nominal-v1 with the head updated last a couple of days ago.
> All steering files are copies of those coming from the svn bundle, in which I
> only change the detector name (even if I don't change it, I get the same
> error).
>
> You can find:
>
> 1) (following Sho's method) the filtered slcio file upon which I run the
> command
>
>> java -jar hps_distribution.jar HPS2014ReadoutToLcio.lcsim -i
> filtered_EngRun2015-Nominal-v1.slcio
> -DoutputFile=ap2.2gev075mev_readoutLcio_EngRun2015-Nominal-v1.slcio
> -DisMC=true
>
> which gives me this traceback:
>
> INFO: Event 0 with sequence 0
> Apr 30, 2015 8:10:35 PM org.hps.recon.ecal.cluster.ClusterDriver process
> INFO: The input hit collection EcalCorrectedHits is missing from the event.
> java.lang.NullPointerException
> at
> org.lcsim.recon.tracking.digitization.sisim.config.SimTrackerHitReadoutDriver.process(SimTrackerHitReadoutDriver.java:64)
> at org.lcsim.util.Driver.doProcess(Driver.java:260)
> at org.lcsim.util.Driver.processChildren(Driver.java:270)
> at org.lcsim.util.Driver.process(Driver.java:186)
> at
> org.hps.readout.svt.SimpleSvtReadout.process(SimpleSvtReadout.java:161)
> at org.lcsim.util.Driver.doProcess(Driver.java:260)
> at org.lcsim.util.Driver.processChildren(Driver.java:270)
> at org.lcsim.util.Driver.process(Driver.java:186)
> at org.lcsim.util.DriverAdapter.recordSupplied(DriverAdapter.java:74)
> at
> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832)
> at
> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668)
> at
> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566)
> at org.lcsim.util.loop.LCSimLoop.loop(LCSimLoop.java:151)
> at org.lcsim.job.JobControlManager.run(JobControlManager.java:431)
> at org.hps.job.JobManager.run(JobManager.java:55)
> at org.lcsim.job.JobControlManager.run(JobControlManager.java:189)
> at org.hps.job.JobManager.main(JobManager.java:23)
>
> -----
>
> and:
>
> 2) the readout file that I obtain using this command:
>
>> java -jar hps_distribution.jar HPS2014ReadoutNoPileup.lcsim -i
> /Data/mcarlo/recon/ap2.2gev075mev_EngRun2015-Nominal-v1.slcio
> -DoutputFile=ap2.2gev075mev_readout_EngRun2015-Nominal-v1 -DisMC=true
>
> and which I try to read with this:
>
>> java -jar hps_distribution.jar HPS2014OfflineNoPileupRecon.lcsim -i
> ap2.2gev075mev_readout_EngRun2015-Nominal-v1.slcio
> -DoutputFile=recon_EngRun2015-Nominal-v1 -DisMC=true
>
>
> failing with the following traceback:
>
> INFO: Event 5 with sequence 0
> java.lang.RuntimeException: Could not retrieve IdentifierHelper for
> RawTrackerHit. No SimTrackerHits found.
> at
> org.lcsim.event.base.BaseRawTrackerHit.getIdentifierHelper(BaseRawTrackerHit.java:93)
> at
> org.lcsim.event.base.BaseHit.getIdentifierFieldValue(BaseHit.java:157)
> at
> org.hps.recon.tracking.RawTrackerHitFitterDriver.process(RawTrackerHitFitterDriver.java:142)
> at org.lcsim.util.Driver.doProcess(Driver.java:260)
> at org.lcsim.util.Driver.processChildren(Driver.java:270)
> at org.lcsim.util.Driver.process(Driver.java:186)
> at org.lcsim.util.DriverAdapter.recordSupplied(DriverAdapter.java:74)
> at
> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832)
> at
> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668)
> at
> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566)
> at org.lcsim.util.loop.LCSimLoop.loop(LCSimLoop.java:151)
> at org.lcsim.job.JobControlManager.run(JobControlManager.java:431)
> at org.hps.job.JobManager.run(JobManager.java:55)
> at org.lcsim.job.JobControlManager.run(JobControlManager.java:189)
> at org.hps.job.JobManager.main(JobManager.java:23)
>
>
> thanks, cheers
> Alessandra
>
>
>
>
>
>
> On Mon, 27 Apr 2015, Sho Uemura wrote:
>
>> On Mon, 27 Apr 2015, Alessandra Filippi wrote:
>>
>>> Hi all,
>>> still stuck with the same problem. I decided to go on with the newest svn
>>> head in order to work with the correct geometry setup, as suggested by
>>> Matt's last email, but again I have some issues with
>>> readout+reconstruction,
>>> in both cases (with NoPileUp, or without):
>>>
>>> - if I use HPS2014ReadoutToLcio.lcsim (after filtering, which is ok), I
>>> get
>>> this error:
>>> java.lang.RuntimeException: no queued events waiting for an EcalHitWriter
>>> bank
>>
>> That's weird. You haven't made any changes to HPS2014ReadoutToLcio.lcsim?
>>
>>>
>>> - if I use HPS2014OfflineNoPileupRecon.lcsim, I keep on getting the error
>>> on RawTrackerHit I was reporting last week:
>>> java.lang.RuntimeException: Could not retrieve IdentifierHelper for
>>> RawTrackerHit. No SimTrackerHits found.
>>
>> This error might be fixable. I'll look at this a bit and let you know.
>>
>>>
>>> Any idea on how to go on and get eventually some reconstructed tracks?
>>> thanks
>>> Alessandra
>>>
>>>
>>>
>>> On Wed, 22 Apr 2015, Sho Uemura wrote:
>>>
>>>> It's equivalent. NoPileup is a simplified version of the full simulation.
>>>>
>>>> On Wed, 22 Apr 2015, Alessandra Filippi wrote:
>>>>
>>>>> ok, if I go back to my "old" release (3.2) Sho's suggestion works:
>>>>> filtering slic file + HPS2014ReadoutToLcio.lcsim for readout +
>>>>> HPS2014OfflineRecon.lcsim (+gbl for my purposes) for reconstruction.
>>>>> Is this (in principle) equivalent to
>>>>> HPS2014ReadoutNoPileup.lcsim + HPS2014OfflineNoPileupRecon.lcsim,
>>>>> isn'it? thanks, cheers
>>>>> Alessandra
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, 22 Apr 2015, Sho Uemura wrote:
>>>>>
>>>>>> I never got to look at this - I was going to and then things got busy.
>>>>>>
>>>>>> Can you not use the full readout simulation
>>>>>> (HPS2014ReadoutToLcio.lcsim) instead? Pretty sure that's not broken.
>>>>>> You will need to space out the events first, following the instructions
>>>>>> in this page for "electron beam data":
>>>>>>
>>>>>> https://confluence.slac.stanford.edu/display/hpsg/Running+Readout+Simulation
>>>>>>
>>>>>> On Wed, 22 Apr 2015, Hansson Adrian, Per Ola wrote:
>>>>>>
>>>>>>> Hi Alessandra,
>>>>>>>
>>>>>>> I didn't have time to test your slic file yet; it?s been pretty busy
>>>>>>> here as you can imagine.
>>>>>>>
>>>>>>> I?m not sure this was ever resolved but I hope Omar or Sho can tell us
>>>>>>> if is or if they could recreate this problem?
>>>>>>>
>>>>>>> I hope I can run your file today.
>>>>>>>
>>>>>>> /pelle
>>>>>>>
>>>>>>>
>>>>>>> On Apr 22, 2015, at 9:25 AM, Alessandra Filippi <[log in to unmask]>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi all,
>>>>>>>> I dug the listserv mails to discover that the problem I'm having with
>>>>>>>> the reconstruction of Montecarlo data using the "standard"
>>>>>>>> HPS2014ReadoutNoPileup.lcsim and HPS2014OfflineNoPileupRecon.lcsim
>>>>>>>> (unable to find any track) is not new. I'm replying to the last
>>>>>>>> message of the thread... any news about it?
>>>>>>>> It looks like thresholds have to be disabled, at the readout step
>>>>>>>> (instead of using the TrackerDigiDriver driver in place of
>>>>>>>> TrackerHitDriver, which was my conclusion as well as Bradley's, as
>>>>>>>> far as I can see from his messages).
>>>>>>>> Can you tell me how practically to do this?
>>>>>>>> Thanks,
>>>>>>>> Alessandra
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, 21 Feb 2015, Hansson Adrian, Per Ola wrote:
>>>>>>>>
>>>>>>>>> Hi Bradley,
>>>>>>>>> I confirm that the standard chain doesn?t work.
>>>>>>>>> The problem is likely in the conditions. The amplitude for the hits
>>>>>>>>> are way too small
>>>>>>>>> and therefore fails the threshold cut. I disabled the cut and create
>>>>>>>>> the needed hits. We
>>>>>>>>> will update the conditions when we get some time. Btw., for info,
>>>>>>>>> this is in the readout
>>>>>>>>> sim.
>>>>>>>>> However, the recon still fails because the fits to the pulse shape
>>>>>>>>> looks weird and I
>>>>>>>>> suspect it just fails (NaN and infinite values in the shape fit
>>>>>>>>> parameters).
>>>>>>>>> Sho, can you look quickly at this quickly? It looks like the pulse
>>>>>>>>> shapes might be fine
>>>>>>>>> (just looking at a few examples). shouldn?t it work even though the
>>>>>>>>> gain is off or is
>>>>>>>>> there some other threshold cut in the fitter process?
>>>>>>>>> I attach a readout and recon file with thresholds disabled. (A?,
>>>>>>>>> 2.2GeV, v8-2pt2
>>>>>>>>> detector).
>>>>>>>>> /Pelle
>>>>>>>>> ________________________________________________________________________________________
>>>>>>>>> Use REPLY-ALL to reply to list
>>>>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>>>
>>>>>>> ########################################################################
>>>>>>> Use REPLY-ALL to reply to list
>>>>>>>
>>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>>>
>>>>>>
>>>>>
>>>>> ########################################################################
>>>>> Use REPLY-ALL to reply to list
>>>>>
>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>
>>>>
>>>> ########################################################################
>>>> Use REPLY-ALL to reply to list
>>>>
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>
>>>
>>> ########################################################################
>>> Use REPLY-ALL to reply to list
>>>
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>
> ########################################################################
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|