LCDetectors/detectors/sidmay05
diff -u -r1.1 -r1.2
--- compact_tkn.xml 16 Jul 2005 06:12:11 -0000 1.1
+++ compact_tkn.xml 16 Jul 2005 20:27:02 -0000 1.2
@@ -129,29 +129,29 @@
<detector id="2" name="BarrelTrackerSupports" type="MultiLayerTracker">
<layer id="1" inner_r = "18.000*cm" outer_z = "26.7*cm">
- <slice material = "CarbonFiber" width = "0.025*cm" />
- <slice material = "Rohacell31" width="1.3*cm" />
- <slice material = "CarbonFiber" width="0.025*cm" />
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="1.3*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
</layer>
<layer id="2" inner_r = "44.300*cm" outer_z = "61.7*cm">
- <slice material = "CarbonFiber" width = "0.025*cm" />
- <slice material = "Rohacell31" width="1.3*cm" />
- <slice material = "CarbonFiber" width="0.025*cm" />
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="1.3*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
</layer>
<layer id="3" inner_r = "70.500*cm" outer_z = "96.7*cm">
- <slice material = "CarbonFiber" width = "0.025*cm" />
- <slice material = "Rohacell31" width="1.3*cm" />
- <slice material = "CarbonFiber" width="0.025*cm" />
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="1.3*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
</layer>
<layer id="4" inner_r = "96.800*cm" outer_z = "131.7*cm">
- <slice material = "CarbonFiber" width = "0.025*cm" />
- <slice material = "Rohacell31" width="1.3*cm" />
- <slice material = "CarbonFiber" width="0.025*cm" />
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="1.3*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
</layer>
<layer id="5" inner_r = "119.300*cm" outer_z = "161.7*cm">
- <slice material = "CarbonFiber" width = "0.025*cm" />
- <slice material = "Rohacell31" width="1.3*cm" />
- <slice material = "CarbonFiber" width="0.025*cm" />
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="1.3*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
</layer>
</detector>
@@ -159,54 +159,54 @@
<detector id="2" name="BarrelTracker" type="MultiLayerTracker" readout="TkrBarrHits">
<layer id="1" inner_r = "20.000*cm" outer_z = "26.7*cm">
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0038*cm" />
- <slice material = "Copper" width = "0.00038*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
</layer>
<layer id="2" inner_r = "46.300*cm" outer_z = "61.7*cm">
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0051*cm" />
- <slice material = "Copper" width = "0.00052*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
</layer>
<layer id="3" inner_r = "72.500*cm" outer_z = "96.7*cm">
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0064*cm" />
- <slice material = "Copper" width = "0.00065*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
</layer>
<layer id="4" inner_r = "98.800*cm" outer_z = "131.7*cm">
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0078*cm" />
- <slice material = "Copper" width = "0.00079*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
</layer>
<layer id="5" inner_r = "121.300*cm" outer_z = "161.7*cm">
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0091*cm" />
- <slice material = "Copper" width = "0.00093*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
</layer>
</detector>
@@ -214,29 +214,29 @@
<detector id="4" name="EndcapTrackerSupports" type="DiskTracker" reflect="true">
<layer id="1" inner_r = "4.0*cm" inner_z = "27.0*cm" outer_r = "25.000*cm">
- <slice material = "CarbonFiber" width = "0.039*cm" />
- <slice material = "Rohacell31" width = "2.5*cm" />
- <slice material = "CarbonFiber" width = "0.039*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "2.5*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
</layer>
<layer id="2" inner_r = "7.9*cm" inner_z = "62.0*cm" outer_r = "51.300*cm">
- <slice material = "CarbonFiber" width = "0.039*cm" />
- <slice material = "Rohacell31" width = "2.5*cm" />
- <slice material = "CarbonFiber" width = "0.039*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "2.5*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
</layer>
<layer id="3" inner_r = "11.8*cm" inner_z = "97.0*cm" outer_r = "77.500*cm">
- <slice material = "CarbonFiber" width = "0.039*cm" />
- <slice material = "Rohacell31" width = "2.5*cm" />
- <slice material = "CarbonFiber" width = "0.039*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "2.5*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
</layer>
<layer id="4" inner_r = "15.6*cm" inner_z = "132.0*cm" outer_r = "103.800*cm">
- <slice material = "CarbonFiber" width = "0.039*cm" />
- <slice material = "Rohacell31" width = "2.5*cm" />
- <slice material = "CarbonFiber" width = "0.039*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "2.5*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
</layer>
<layer id="5" inner_r = "18.9*cm" inner_z = "162.0*cm" outer_r = "126.300*cm">
- <slice material = "CarbonFiber" width = "0.039*cm" />
- <slice material = "Rohacell31" width = "2.5*cm" />
- <slice material = "CarbonFiber" width = "0.039*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "2.5*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
</layer>
</detector>
@@ -244,84 +244,84 @@
<detector id="3" name="EndcapTracker" type="DiskTracker" reflect="true" readout="TkrEndcapHits">
<layer id="1" inner_r = "4.0*cm" inner_z = "30.0*cm" outer_r = "25.000*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0038*cm" />
- <slice material = "Copper" width = "0.00038*cm" />
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
</layer>
<layer id="2" inner_r = "4.0*cm" inner_z = "30.4*cm" outer_r = "25.000*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0038*cm" />
- <slice material = "Copper" width = "0.00038*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
</layer>
<layer id="3" inner_r = "7.9*cm" inner_z = "65.0*cm" outer_r = "51.300*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0051*cm" />
- <slice material = "Copper" width = "0.00052*cm" />
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
</layer>
<layer id="4" inner_r = "7.9*cm" inner_z = "65.4*cm" outer_r = "51.300*cm" >
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0051*cm" />
- <slice material = "Copper" width = "0.00052*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
</layer>
<layer id="5" inner_r = "11.8*cm" inner_z = "100.0*cm" outer_r = "77.500*cm" >
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0064*cm" />
- <slice material = "Copper" width = "0.00065*cm" />
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
</layer>
<layer id="6" inner_r = "11.8*cm" inner_z = "100.4*cm" outer_r = "77.500*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0064*cm" />
- <slice material = "Copper" width = "0.00065*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
</layer>
<layer id="7" inner_r = "15.6*cm" inner_z = "135.0*cm" outer_r = "103.800*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0078*cm" />
- <slice material = "Copper" width = "0.00079*cm" />
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
</layer>
<layer id="8" inner_r = "15.6*cm" inner_z = "135.4*cm" outer_r = "103.800*cm">
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0078*cm" />
- <slice material = "Copper" width = "0.00079*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
</layer>
<layer id="9" inner_r = "18.9*cm" inner_z = "165.0*cm" outer_r = "126.300*cm" >
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0091*cm" />
- <slice material = "Copper" width = "0.00093*cm" />
- <slice material = "PEEK" width = "0.02*cm" />
- <slice material = "Rohacell31" width="0.14*cm" />
- <slice material = "Epoxy" width="0.0175*cm" />
- <slice material = "CarbonFiber" width=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
</layer>
<layer id="10" inner_r = "18.9*cm" inner_z = "165.4*cm" outer_r = "126.300*cm" >
- <slice material = "Silicon" width = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" width = "0.00048*cm" />
- <slice material = "Kapton" width = "0.0091*cm" />
- <slice material = "Copper" width = "0.00093*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
</layer>
</detector>
@@ -329,19 +329,19 @@
<detector id="2" name="TrackerSupportRings" type="DiskTracker" reflect="true">
<layer id="1" inner_r = "18.000*cm" inner_z = "26.7*cm" outer_r = "44.300*cm">
- <slice material = "CarbonFiber" width = "0.15*cm" />
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
</layer>
<layer id="2" inner_r = "44.300*cm" inner_z = "61.7*cm" outer_r = "70.500*cm">
- <slice material = "CarbonFiber" width = "0.15*cm" />
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
</layer>
<layer id="3" inner_r = "70.500*cm" inner_z = "96.7*cm" outer_r = "96.800*cm">
- <slice material = "CarbonFiber" width = "0.15*cm" />
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
</layer>
<layer id="4" inner_r = "96.800*cm" inner_z = "131.7*cm" outer_r = "119.300*cm">
- <slice material = "CarbonFiber" width = "0.15*cm" />
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
</layer>
<layer id="5" inner_r = "119.300*cm" inner_z = "161.7*cm" outer_r = "127.0*cm">
- <slice material = "CarbonFiber" width = "0.15*cm" />
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
</layer>
</detector>
@@ -349,24 +349,24 @@
<detector id="2" name="TrackerReadout" type="DiskTracker" reflect="true">
<layer id="1" inner_r = "25.500*cm" inner_z = "27.0*cm" outer_r = "44.300*cm">
- <slice material = "G10" width = "0.057*cm" />
- <slice material = "Copper" width = "0.0038*cm" />
+ <slice material = "G10" thickness = "0.057*cm" />
+ <slice material = "Copper" thickness = "0.0038*cm" />
</layer>
<layer id="2" inner_r = "51.800*cm" inner_z = "62.0*cm" outer_r = "70.500*cm">
- <slice material = "G10" width = "0.102*cm" />
- <slice material = "Copper" width = "0.0068*cm" />
+ <slice material = "G10" thickness = "0.102*cm" />
+ <slice material = "Copper" thickness = "0.0068*cm" />
</layer>
<layer id="3" inner_r = "78.000*cm" inner_z = "97.0*cm" outer_r = "96.800*cm">
- <slice material = "G10" width = "0.108*cm" />
- <slice material = "Copper" width = "0.0072*cm" />
+ <slice material = "G10" thickness = "0.108*cm" />
+ <slice material = "Copper" thickness = "0.0072*cm" />
</layer>
<layer id="4" inner_r = "104.300*cm" inner_z = "132.0*cm" outer_r = "119.300*cm">
- <slice material = "G10" width = "0.186*cm" />
- <slice material = "Copper" width = "0.0124*cm" />
+ <slice material = "G10" thickness = "0.186*cm" />
+ <slice material = "Copper" thickness = "0.0124*cm" />
</layer>
<layer id="5" inner_r = "104.300*cm" inner_z = "167.0*cm" outer_r = "119.300*cm">
- <slice material = "G10" width = "0.246*cm" />
- <slice material = "Copper" width = "0.0164*cm" />
+ <slice material = "G10" thickness = "0.246*cm" />
+ <slice material = "Copper" thickness = "0.0164*cm" />
</layer>
</detector>
