LCDetectors/detectors/sidaug05_gemhcal
diff -u -r1.1 -r1.2
--- compact.xml 24 Aug 2005 07:57:04 -0000 1.1
+++ compact.xml 24 Aug 2005 22:17:33 -0000 1.2
@@ -455,21 +455,21 @@
<dimensions inner_r = "138.5*cm" outer_z = "277.0*cm" />
<layer repeat="34">
<slice material = "Steel235" thickness = "2.0*cm" />
-<!-- <slice material = "Copper" width = "0.005*cm" /> -->
- <slice material = "G10" width = "0.14*cm" />
- <slice material = "Copper" width = "0.005*cm" />
- <slice material = "GEMGas" width = "0.1*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "Kapton" width = "0.004*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "GEMGas" width = "0.1*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "Kapton" width = "0.004*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "GEMGas" width = "0.3*cm" />
- <slice material = "Copper" width = "0.005*cm" />
- <slice material = "G10" width = "0.14*cm" />
-<!-- <slice material = "Copper" width = "0.005*cm" /> -->
+<!-- <slice material = "Copper" thickness = "0.005*cm" /> -->
+ <slice material = "G10" thickness = "0.14*cm" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "GEMGas" thickness = "0.1*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "Kapton" thickness = "0.004*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "GEMGas" thickness = "0.1*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "Kapton" thickness = "0.004*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "GEMGas" thickness = "0.3*cm" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "G10" thickness = "0.14*cm" />
+<!-- <slice material = "Copper" thickness = "0.005*cm" /> -->
</layer>
</detector>
@@ -477,21 +477,21 @@
<dimensions inner_r = "26.0*cm" inner_z = "179.5*cm" outer_r = "138.25*cm" />
<layer repeat="34" >
<slice material = "Steel235" thickness = "2.0*cm" />
-<!-- <slice material = "Copper" width = "0.005*cm" /> -->
- <slice material = "G10" width = "0.14*cm" />
- <slice material = "Copper" width = "0.005*cm" />
- <slice material = "GEMGas" width = "0.1*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "Kapton" width = "0.004*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "GEMGas" width = "0.1*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "Kapton" width = "0.004*cm" />
- <slice material = "Copper" width = "0.0005*cm" />
- <slice material = "GEMGas" width = "0.3*cm" />
- <slice material = "Copper" width = "0.005*cm" />
- <slice material = "G10" width = "0.14*cm" />
-<!-- <slice material = "Copper" width = "0.005*cm" /> -->
+<!-- <slice material = "Copper" thickness = "0.005*cm" /> -->
+ <slice material = "G10" thickness = "0.14*cm" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "GEMGas" thickness = "0.1*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "Kapton" thickness = "0.004*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "GEMGas" thickness = "0.1*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "Kapton" thickness = "0.004*cm" />
+ <slice material = "Copper" thickness = "0.0005*cm" />
+ <slice material = "GEMGas" thickness = "0.3*cm" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "G10" thickness = "0.14*cm" />
+<!-- <slice material = "Copper" thickness = "0.005*cm" /> -->
</layer>
</detector>