LCDetectors/detectors/sid00
diff -u -r1.2 -r1.3
--- compact.xml 22 Sep 2005 20:18:32 -0000 1.2
+++ compact.xml 22 Sep 2005 20:26:55 -0000 1.3
@@ -29,6 +29,12 @@
</define>
<materials>
+ <material name="TungstenDens23">
+ <D value="17.7" unit="g/cm3"/>
+ <fraction n="0.925" ref="W"/>
+ <fraction n="0.066" ref="Ni"/>
+ <fraction n="0.009" ref="Fe"/>
+ </material>
</materials>
@@ -417,13 +423,13 @@
<detector id="5" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits">
<dimensions inner_r = "127.0*cm" outer_z = "182.0*cm" />
<layer repeat="20">
- <slice material = "Tungsten" thickness = "0.25*cm" />
+ <slice material = "TungstenDens23" thickness = "0.25*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
</layer>
<layer repeat="10">
- <slice material = "Tungsten" thickness = "0.50*cm" />
+ <slice material = "TungstenDens23" thickness = "0.50*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
@@ -433,13 +439,13 @@
<detector id="6" name="EMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHits">
<dimensions inner_r = "26.0*cm" inner_z = "168.0*cm" outer_r = "126.5*cm" />
<layer repeat="20">
- <slice material = "Tungsten" thickness = "0.25*cm" />
+ <slice material = "TungstenDens23" thickness = "0.25*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
</layer>
<layer repeat="10">
- <slice material = "Tungsten" thickness = "0.50*cm" />
+ <slice material = "TungstenDens23" thickness = "0.50*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
@@ -527,13 +533,13 @@
<detector id="11" name="ForwardEMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="ForwardEcalEndcapHits">
<dimensions inner_r = "8.69*cm" inner_z = "168.0*cm" outer_r = "25.0*cm" />
<layer repeat="20" >
- <slice material = "Tungsten" thickness = "0.25*cm" />
+ <slice material = "TungstenDens23" thickness = "0.25*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
</layer>
<layer repeat="10" >
- <slice material = "Tungsten" thickness = "0.50*cm" />
+ <slice material = "TungstenDens23" thickness = "0.50*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />
@@ -541,13 +547,13 @@
</detector>
<!-- These are just the pole tips for the front mask -->
<detector id="0" name="ForwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
- <material name="Tungsten"/>
+ <material name="TungstenDens23"/>
<zplane rmin = "8.14*cm" rmax="8.69*cm" z="168.0*cm" />
<zplane rmin="8.68*cm" rmax="8.69*cm" z="181.75*cm"/>
</detector>
<detector id="0" name="BackwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
- <material name="Tungsten"/>
+ <material name="TungstenDens23"/>
<zplane rmin="8.68*cm" rmax="8.69*cm" z="-181.75*cm"/>
<zplane rmin = "8.14*cm" rmax="8.69*cm" z="-168.0*cm" />
</detector>
@@ -555,13 +561,13 @@
<!-- M1 begins at front of HCal end cap-->
<detector id="0" name="ForwardM1" type="PolyconeSupport" insideTrackingVolume="false">
- <material name="Tungsten"/>
+ <material name="TungstenDens23"/>
<zplane rmin = "8.68*cm" rmax="25.0*cm" z="182.0*cm" />
<zplane rmin="16.0*cm" rmax="25.0*cm" z="330.0*cm"/>
</detector>
<detector id="0" name="BackwardM1" type="PolyconeSupport" insideTrackingVolume="false">
- <material name="Tungsten"/>
+ <material name="TungstenDens23"/>
<zplane rmin="16.0*cm" rmax="25.0*cm" z="-330.0*cm"/>
<zplane rmin = "8.68*cm" rmax="25.0*cm" z="-182.0*cm" />
</detector>
@@ -584,7 +590,7 @@
<detector id="12" name="ForwardLuminosityMonitor" reflect="true" type="CylindricalEndcapCalorimeter" readout="LuminosityMonitorHits">
<dimensions inner_r = "2.0*cm" inner_z = "295.0*cm" outer_r = "14.28*cm" />
<layer repeat="50" >
- <slice material = "Tungsten" thickness = "0.25*cm" />
+ <slice material = "TungstenDens23" thickness = "0.25*cm" />
<slice material = "G10" thickness = "0.068*cm" />
<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
<slice material = "Air" thickness = "0.025*cm" />