LCDetectors/detectors/sid00
diff -u -r1.4 -r1.5
--- compact.xml 22 Sep 2005 20:34:31 -0000 1.4
+++ compact.xml 22 Sep 2005 23:53:00 -0000 1.5
@@ -172,252 +172,251 @@
<slice material = "Beryllium" thickness = "0.1*cm" />
</layer>
</detector>
-
-
- <!-- Barrel Tracker Supports -->
-
- <detector id="0" name="TrackerBarrelSupports" type="MultiLayerTracker">
- <layer id="1" inner_r = "18.000*cm" outer_z = "26.7*cm">
- <slice material = "CarbonFiber" thickness = "0.025*cm" />
- <slice material = "Rohacell31" thickness="1.3*cm" />
- <slice material = "CarbonFiber" thickness="0.025*cm" />
- </layer>
- <layer id="2" inner_r = "44.300*cm" outer_z = "61.7*cm">
- <slice material = "CarbonFiber" thickness = "0.025*cm" />
- <slice material = "Rohacell31" thickness="1.3*cm" />
- <slice material = "CarbonFiber" thickness="0.025*cm" />
- </layer>
- <layer id="3" inner_r = "70.500*cm" outer_z = "96.7*cm">
- <slice material = "CarbonFiber" thickness = "0.025*cm" />
- <slice material = "Rohacell31" thickness="1.3*cm" />
- <slice material = "CarbonFiber" thickness="0.025*cm" />
- </layer>
- <layer id="4" inner_r = "96.800*cm" outer_z = "131.7*cm">
- <slice material = "CarbonFiber" thickness = "0.025*cm" />
- <slice material = "Rohacell31" thickness="1.3*cm" />
- <slice material = "CarbonFiber" thickness="0.025*cm" />
- </layer>
- <layer id="5" inner_r = "119.300*cm" outer_z = "161.7*cm">
- <slice material = "CarbonFiber" thickness = "0.025*cm" />
- <slice material = "Rohacell31" thickness="1.3*cm" />
- <slice material = "CarbonFiber" thickness="0.025*cm" />
- </layer>
- </detector>
-
- <!-- Barrel Tracker Modules -->
-
- <detector id="3" name="TrackerBarrel" type="MultiLayerTracker" readout="TkrBarrHits">
- <layer id="1" inner_r = "20.000*cm" outer_z = "26.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- <layer id="2" inner_r = "46.300*cm" outer_z = "61.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- </layer>
- <layer id="3" inner_r = "72.500*cm" outer_z = "96.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- </layer>
- <layer id="4" inner_r = "98.800*cm" outer_z = "131.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- </layer>
- <layer id="5" inner_r = "121.300*cm" outer_z = "161.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- </layer>
- </detector>
-
- <!-- Endcap Tracker Supports -->
-
- <detector id="0" name="TrackerEndcapSupports" type="DiskTracker" reflect="true">
- <layer id="1" inner_r = "4.0*cm" inner_z = "27.0*cm" outer_r = "25.000*cm">
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- <slice material = "Rohacell31" thickness = "2.5*cm" />
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- </layer>
- <layer id="2" inner_r = "7.9*cm" inner_z = "62.0*cm" outer_r = "51.300*cm">
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- <slice material = "Rohacell31" thickness = "2.5*cm" />
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- </layer>
- <layer id="3" inner_r = "11.8*cm" inner_z = "97.0*cm" outer_r = "77.500*cm">
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- <slice material = "Rohacell31" thickness = "2.5*cm" />
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- </layer>
- <layer id="4" inner_r = "15.6*cm" inner_z = "132.0*cm" outer_r = "103.800*cm">
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- <slice material = "Rohacell31" thickness = "2.5*cm" />
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- </layer>
- <layer id="5" inner_r = "18.9*cm" inner_z = "162.0*cm" outer_r = "126.300*cm">
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- <slice material = "Rohacell31" thickness = "2.5*cm" />
- <slice material = "CarbonFiber" thickness = "0.039*cm" />
- </layer>
- </detector>
-
- <!-- Endcap Tracker Modules -->
-
- <detector id="4" name="TrackerEndcap" type="DiskTracker" reflect="true" readout="TkrEndcapHits">
- <layer id="1" inner_r = "4.0*cm" inner_z = "30.0*cm" outer_r = "25.000*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="2" inner_r = "4.0*cm" inner_z = "30.4*cm" outer_r = "25.000*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- <layer id="3" inner_r = "7.9*cm" inner_z = "65.0*cm" outer_r = "51.300*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="4" inner_r = "7.9*cm" inner_z = "65.4*cm" outer_r = "51.300*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- </layer>
- <layer id="5" inner_r = "11.8*cm" inner_z = "100.0*cm" outer_r = "77.500*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="6" inner_r = "11.8*cm" inner_z = "100.4*cm" outer_r = "77.500*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- </layer>
- <layer id="7" inner_r = "15.6*cm" inner_z = "135.0*cm" outer_r = "103.800*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="8" inner_r = "15.6*cm" inner_z = "135.4*cm" outer_r = "103.800*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- </layer>
- <layer id="9" inner_r = "18.9*cm" inner_z = "165.0*cm" outer_r = "126.300*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31" thickness="0.14*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="10" inner_r = "18.9*cm" inner_z = "165.4*cm" outer_r = "126.300*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- </layer>
- </detector>
-
- <!-- Tracker Support Rings -->
-
- <detector id="0" name="TrackerSupportRings" type="DiskTracker" reflect="true">
- <layer id="1" inner_r = "18.000*cm" inner_z = "26.7*cm" outer_r = "44.300*cm">
- <slice material = "CarbonFiber" thickness = "0.15*cm" />
- </layer>
- <layer id="2" inner_r = "44.300*cm" inner_z = "61.7*cm" outer_r = "70.500*cm">
- <slice material = "CarbonFiber" thickness = "0.15*cm" />
- </layer>
- <layer id="3" inner_r = "70.500*cm" inner_z = "96.7*cm" outer_r = "96.800*cm">
- <slice material = "CarbonFiber" thickness = "0.15*cm" />
- </layer>
- <layer id="4" inner_r = "96.800*cm" inner_z = "131.7*cm" outer_r = "119.300*cm">
- <slice material = "CarbonFiber" thickness = "0.15*cm" />
- </layer>
- <layer id="5" inner_r = "119.300*cm" inner_z = "161.7*cm" outer_r = "126.5*cm">
- <slice material = "CarbonFiber" thickness = "0.15*cm" />
- </layer>
- </detector>
-
- <!-- Tracker Readout/Power Distribution System -->
-
- <detector id="0" name="TrackerReadout" type="DiskTracker" reflect="true">
- <layer id="1" inner_r = "25.500*cm" inner_z = "27.0*cm" outer_r = "44.300*cm">
- <slice material = "G10" thickness = "0.057*cm" />
- <slice material = "Copper" thickness = "0.0038*cm" />
- </layer>
- <layer id="2" inner_r = "51.800*cm" inner_z = "62.0*cm" outer_r = "70.500*cm">
- <slice material = "G10" thickness = "0.102*cm" />
- <slice material = "Copper" thickness = "0.0068*cm" />
- </layer>
- <layer id="3" inner_r = "78.000*cm" inner_z = "97.0*cm" outer_r = "96.800*cm">
- <slice material = "G10" thickness = "0.108*cm" />
- <slice material = "Copper" thickness = "0.0072*cm" />
- </layer>
- <layer id="4" inner_r = "104.300*cm" inner_z = "132.0*cm" outer_r = "119.300*cm">
- <slice material = "G10" thickness = "0.186*cm" />
- <slice material = "Copper" thickness = "0.0124*cm" />
- </layer>
- <layer id="5" inner_r = "104.300*cm" inner_z = "167.0*cm" outer_r = "119.300*cm">
- <slice material = "G10" thickness = "0.246*cm" />
- <slice material = "Copper" thickness = "0.0164*cm" />
- </layer>
- </detector>
+
+<!-- Barrel Tracker Supports -->
+
+ <detector id="2" name="TrackerBarrelSupports" type="MultiLayerTracker">
+ <layer id="1" inner_r = "18.500*cm" outer_z = "26.7*cm">
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="0.8*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
+ </layer>
+ <layer id="2" inner_r = "44.100*cm" outer_z = "60.8*cm">
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="0.8*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
+ </layer>
+ <layer id="3" inner_r = "69.600*cm" outer_z = "94.8*cm">
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="0.8*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
+ </layer>
+ <layer id="4" inner_r = "95.200*cm" outer_z = "128.9*cm">
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="0.8*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
+ </layer>
+ <layer id="5" inner_r = "120.800*cm" outer_z = "163.0*cm">
+ <slice material = "CarbonFiber" thickness = "0.025*cm" />
+ <slice material = "Rohacell31" thickness="0.8*cm" />
+ <slice material = "CarbonFiber" thickness="0.025*cm" />
+ </layer>
+ </detector>
+
+<!-- Barrel Tracker Modules -->
+
+ <detector id="2" name="TrackerBarrel" type="MultiLayerTracker" readout="TkrBarrHits">
+ <layer id="1" inner_r = "20.000*cm" outer_z = "26.7*cm">
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
+ </layer>
+ <layer id="2" inner_r = "45.600*cm" outer_z = "60.8*cm">
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
+ </layer>
+ <layer id="3" inner_r = "71.100*cm" outer_z = "94.8*cm">
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
+ </layer>
+ <layer id="4" inner_r = "96.700*cm" outer_z = "128.9*cm">
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
+ </layer>
+ <layer id="5" inner_r = "122.300*cm" outer_z = "163.0*cm">
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
+ </layer>
+ </detector>
+
+<!-- Endcap Tracker Supports -->
+
+ <detector id="4" name="TrackerEndcapSupports" type="DiskTracker" reflect="true">
+ <layer id="1" inner_r = "3.4*cm" inner_z = "27.0*cm" outer_r = "23.000*cm">
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "1.2*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ </layer>
+ <layer id="2" inner_r = "7.4*cm" inner_z = "61.1*cm" outer_r = "48.600*cm">
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "1.2*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ </layer>
+ <layer id="3" inner_r = "11.4*cm" inner_z = "95.1*cm" outer_r = "74.100*cm">
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "1.2*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ </layer>
+ <layer id="4" inner_r = "15.5*cm" inner_z = "129.2*cm" outer_r = "99.700*cm">
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "1.2*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ </layer>
+ <layer id="5" inner_r = "19.5*cm" inner_z = "163.3*cm" outer_r = "125.300*cm">
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ <slice material = "Rohacell31" thickness = "1.2*cm" />
+ <slice material = "CarbonFiber" thickness = "0.039*cm" />
+ </layer>
+ </detector>
+
+<!-- Endcap Tracker Modules -->
+
+ <detector id="3" name="TrackerEndcap" type="DiskTracker" reflect="true" readout="TkrEndcapHits">
+ <layer id="1" inner_r = "3.4*cm" inner_z = "28.7*cm" outer_r = "23.000*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ </layer>
+ <layer id="2" inner_r = "3.4*cm" inner_z = "29.1*cm" outer_r = "23.000*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0038*cm" />
+ <slice material = "Copper" thickness = "0.00038*cm" />
+ </layer>
+ <layer id="3" inner_r = "7.4*cm" inner_z = "62.8*cm" outer_r = "48.600*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ </layer>
+ <layer id="4" inner_r = "7.4*cm" inner_z = "63.2*cm" outer_r = "48.600*cm" >
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0051*cm" />
+ <slice material = "Copper" thickness = "0.00052*cm" />
+ </layer>
+ <layer id="5" inner_r = "11.4*cm" inner_z = "96.8*cm" outer_r = "74.100*cm" >
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ </layer>
+ <layer id="6" inner_r = "11.4*cm" inner_z = "97.2*cm" outer_r = "74.100*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0064*cm" />
+ <slice material = "Copper" thickness = "0.00065*cm" />
+ </layer>
+ <layer id="7" inner_r = "15.5*cm" inner_z = "130.9*cm" outer_r = "99.700*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ </layer>
+ <layer id="8" inner_r = "15.5*cm" inner_z = "131.3*cm" outer_r = "99.700*cm">
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0078*cm" />
+ <slice material = "Copper" thickness = "0.00079*cm" />
+ </layer>
+ <layer id="9" inner_r = "19.5*cm" inner_z = "165.0*cm" outer_r = "125.300*cm" >
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
+ <slice material = "PEEK" thickness = "0.02*cm" />
+ <slice material = "Rohacell31" thickness="0.14*cm" />
+ <slice material = "Epoxy" thickness="0.0175*cm" />
+ <slice material = "CarbonFiber" thickness=".016*cm" />
+ </layer>
+ <layer id="10" inner_r = "19.5*cm" inner_z = "165.4*cm" outer_r = "125.300*cm" >
+ <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
+ <slice material = "Silicon" thickness = "0.00048*cm" />
+ <slice material = "Kapton" thickness = "0.0091*cm" />
+ <slice material = "Copper" thickness = "0.00093*cm" />
+ </layer>
+ </detector>
+
+<!-- Tracker Support Rings -->
+
+ <detector id="2" name="TrackerSupportRings" type="DiskTracker" reflect="true">
+ <layer id="1" inner_r = "18.500*cm" inner_z = "26.7*cm" outer_r = "44.100*cm">
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
+ </layer>
+ <layer id="2" inner_r = "44.100*cm" inner_z = "60.8*cm" outer_r = "69.600*cm">
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
+ </layer>
+ <layer id="3" inner_r = "69.600*cm" inner_z = "94.8*cm" outer_r = "95.200*cm">
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
+ </layer>
+ <layer id="4" inner_r = "95.200*cm" inner_z = "128.9*cm" outer_r = "120.800*cm">
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
+ </layer>
+ <layer id="5" inner_r = "120.800*cm" inner_z = "163.0*cm" outer_r = "126.5*cm">
+ <slice material = "CarbonFiber" thickness = "0.15*cm" />
+ </layer>
+ </detector>
+
+<!-- Tracker Readout/Power Distribution System -->
+
+ <detector id="2" name="TrackerReadout" type="DiskTracker" reflect="true">
+ <layer id="1" inner_r = "23.500*cm" inner_z = "27.0*cm" outer_r = "43.600*cm">
+ <slice material = "G10" thickness = "0.057*cm" />
+ <slice material = "Copper" thickness = "0.0038*cm" />
+ </layer>
+ <layer id="2" inner_r = "49.100*cm" inner_z = "61.1*cm" outer_r = "69.100*cm">
+ <slice material = "G10" thickness = "0.102*cm" />
+ <slice material = "Copper" thickness = "0.0068*cm" />
+ </layer>
+ <layer id="3" inner_r = "74.600*cm" inner_z = "95.1*cm" outer_r = "94.700*cm">
+ <slice material = "G10" thickness = "0.108*cm" />
+ <slice material = "Copper" thickness = "0.0072*cm" />
+ </layer>
+ <layer id="4" inner_r = "100.200*cm" inner_z = "129.2*cm" outer_r = "120.300*cm">
+ <slice material = "G10" thickness = "0.186*cm" />
+ <slice material = "Copper" thickness = "0.0124*cm" />
+ </layer>
+ <layer id="5" inner_r = "100.200*cm" inner_z = "167.0*cm" outer_r = "120.300*cm">
+ <slice material = "G10" thickness = "0.246*cm" />
+ <slice material = "Copper" thickness = "0.0164*cm" />
+ </layer>
+ </detector>
<!-- Electromagnetic calorimeter -->