The results of the mX fit obtained by taking the S/P ratio in mX bins as obtained from a p1 fit mentioned below (see values in the first table below) are at http://www.slac.stanford.edu/~bozzi/scra/Ibufitcorr_fixcountdsstag/ http://www.slac.stanford.edu/~bozzi/scra/Ibufitcorr_fixcountdsstag/fitcorr_fixcountdsstagfitresults.eps http://www.slac.stanford.edu/~bozzi/scra/Ibufitcorr_fixcountdsstag/fitcorr_fixcountdsstagresults.dat compare them with the results obtained by taking the S/P ratio in mX bins (see values in the second table below) by simply fitting http://www.slac.stanford.edu/~bozzi/scra/Ibuncorr_fixcountdsstag/ http://www.slac.stanford.edu/~bozzi/scra/Ibuncorr_fixcountdsstag/ncorr_fixcountdsstagfitresults.eps http://www.slac.stanford.edu/~bozzi/scra/Ibuncorr_fixcountdsstag/ncorr_fixcountdsstagresults.dat Concezio. Il giorno lun, 24-07-2006 alle 19:12 +0200, Concezio Bozzi ha scritto: > Hi, > I have implemented a polynomial fit on the S/P correction factors. Just > to give an idea on how things change by fitting the corrections on data > as a function on mx by doing a p1 fit (==a0+a1*mX): > > #mx_l mx_h corr err_corr > 0.00 1.55 2.205 +- 0.401 > 1.55 1.90 1.697 +- 0.213 > 1.90 2.20 1.524 +- 0.175 > 2.20 2.50 1.363 +- 0.169 > 2.50 2.80 1.203 +- 0.193 > 2.80 3.10 1.042 +- 0.238 > 3.10 3.40 0.882 +- 0.295 > 3.40 3.70 0.721 +- 0.358 > 3.70 4.20 0.507 +- 0.447 > 4.20 5.00 0.160 +- 0.598 > > the corrections based simply on the mES fits outcomes (what we had been > using up to now) were > > #mx_l mx_h corr err_corr > 0.00 1.55 1.499 +- 0.495 > 1.55 1.90 2.688 +- 0.655 > 1.90 2.20 1.801 +- 0.296 > 2.20 2.50 1.896 +- 0.611 > 2.50 2.80 1.165 +- 0.468 > 2.80 3.10 0.637 +- 0.311 > 3.10 3.40 19.367+- 34.585 > 3.40 3.70 1.524 +- 1.610 > 3.70 4.20 8.180 +- 31.833 > 4.20 5.00 0.555 +- 6.639 > > fits with the fitted correction ratios are running... > Concezio. > > Il giorno lun, 24-07-2006 alle 18:23 +0200, Heiko Lacker ha scritto: > > Hi, > > > > please don't forget that we have shifted our > > starting time from 8:15 to 7:30 SLAC time. > > > > Talk to you tomorrow. > > > > Cheers, > > Heiko >