| Commit in LCDetectors/detectors/sidaug05_8layertracker on MAIN | |||
| TrackParameters.properties | +14 | added 1.1 | |
| SimpleTrack.properties | +6 | added 1.1 | |
| ClusterParameters.properties | +45 | added 1.1 | |
| compact.xml | +739 | added 1.1 | |
| detector.properties | +1 | added 1.1 | |
| IDEfficiency.properties | +6 | added 1.1 | |
| IndividualParticleReconstruction.properties | +13 | added 1.1 | |
| Cheating.properties | +28 | added 1.1 | |
| +852 | |||
no message
diff -N TrackParameters.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ TrackParameters.properties 17 Oct 2006 19:19:01 -0000 1.1 @@ -0,0 +1,14 @@
+# Detector parameters needed for full smear package 01.14.99 +# Changed for no/with beamspot constraint, ww, 08/13/00 + +PtMin: 0.200 +PolarInner: 0.90 +PolarOuter: 0.99 + +# no beamspot constraint +BarrelTableFile-nbc: FullBarrelResolutionNbc +EndcapTableFile-nbc: FullBarrelResolutionNbc + +# with beamspot constraint +BarrelTableFile-bc: FullBarrelResolutionBc +EndcapTableFile-bc: FullBarrelResolutionBc
\ No newline at end of file
diff -N SimpleTrack.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ SimpleTrack.properties 17 Oct 2006 19:19:01 -0000 1.1 @@ -0,0 +1,6 @@
+ConstantTerm: 0.000021 +ThetaTerm: 0.001 +TanLambdaErrorScale: 1.000 +PhiErrorScale: 1.000 +D0ErrorScale: 1.000 +Z0ErrorScale: 1.000
\ No newline at end of file
diff -N ClusterParameters.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ ClusterParameters.properties 17 Oct 2006 19:19:01 -0000 1.1 @@ -0,0 +1,45 @@
+ +EMmin: 0.10 +EMOnset: 0.10 + +EMSharpness: 12.00 + +PolarEMInner: 0.95 + +PolarEMOuter: 0.95 + + +EMResolution: 0.18 + +EMConstantTerm: 0.00 + +EMPositionError: 0.1 + +EMAlignmentError: 0 + + +HADmin: 0.20 + +HADOnset: 0.20 + +HADSharpness: 10.00 + +PolarHADInner: 0.95 + +PolarHADOuter: 0.95 + + +HADResolution: 0.50 + +HADConstantTerm: 0.08 + +HADPositionError: 1.0 + +HADAlignmentError: 0 + + +JETParameterization: false +JETResolution: 0.30 +JETHadDegradeFraction: 1.0 +JETEMEnergyFraction: 0.285 +JETHadEnergyFraction: 0.713
\ No newline at end of file
diff -N compact.xml --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ compact.xml 17 Oct 2006 19:19:01 -0000 1.1 @@ -0,0 +1,739 @@
+<lccdd xmlns:compact="http://www.lcsim.org/schemas/compact/1.0" + xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" + xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd"> + + <info name="sidaug05_8layertracker" + title="Silicon Detector August 2005 (Snowmass) 2 milliradian with 8 tracker layers" + author="Norman Graf" + url="http://confluence.slac.stanford.edu/display/ilc/sidaug05" + status="production" + version="$Id: compact.xml,v 1.1 2006/10/17 19:19:01 ngraf Exp $"> + <comment>The sidaug05 detector with 8 tracker layers. v0.1 061013</comment> + </info> + + <!-- Constants --> + <define> + + <constant name="cm" value="10"/> + + <!-- world --> + <constant name="world_side" value="30000" /> + <constant name="world_x" value="world_side" /> + <constant name="world_y" value="world_side" /> + <constant name="world_z" value="world_side" /> + + <!-- tracking region --> + <constant name="tracking_region_radius" value="126.5*cm"/> + <constant name="tracking_region_zmax" value="167.9*cm"/> + + </define> + + <materials> + </materials> + + + <detectors> + + + <!-- Beampipe --> + + <detector id="0" name="BeamPipe" type="PolyconeSupport" insideTrackingVolume="true"> + <material name="Beryllium"/> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.2)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3)" z="-tracking_region_zmax" /> + <zplane rmin="1.2*cm" rmax="1.3*cm" z="-6.251*cm"/> + <zplane rmin="1.2*cm" rmax="1.240*cm" z="-6.25*cm"/> + <zplane rmin="1.2*cm" rmax="1.240*cm" z="6.25*cm" /> + <zplane rmin="1.2*cm" rmax="1.3*cm" z="6.251*cm" /> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.2)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3)" z="tracking_region_zmax" /> + </detector> + <!-- BeamPipe Liner --> + + <detector id="0" name="BeamPipeLiner" type="PolyconeSupport" insideTrackingVolume="true"> + <material name="Titanium"/> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.1925)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.2)" z="-tracking_region_zmax" /> + <zplane rmin="1.1925*cm" rmax="1.2*cm" z="-6.251*cm"/> + <zplane rmin="1.1975*cm" rmax="1.20*cm" z="-6.25*cm" /> + <zplane rmin="1.1975*cm" rmax="1.20*cm" z="6.25*cm" /> + <zplane rmin="1.1925*cm" rmax="1.2*cm" z="6.251*cm" /> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.1925)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.2)" z="tracking_region_zmax" /> + </detector> + + <!-- VXD cabling/cooling material --> + + <detector id="0" name="VXDserviceZforward" type="PolyconeSupport" insideTrackingVolume="true"> + <material name="G10"/> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3990)" z="-tracking_region_zmax" /> + <zplane rmin="1.3*cm" rmax="1.399*cm" z="-6.251*cm"/> + </detector> + + <detector id="0" name="VXDserviceZbackward" type="PolyconeSupport" insideTrackingVolume="true"> + <material name="G10"/> + <zplane rmin="1.3*cm" rmax="1.399*cm" z="6.251*cm"/> + <zplane rmin = "((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3)" rmax="((tracking_region_zmax-6.25)*(8.96-1.2)/(185.-6.25)+1.3990)" z="tracking_region_zmax" /> + </detector> + + <!-- Vertex Detector --> + + <detector id="11" name="VertexBarrel" type="MultiLayerTracker" readout="VtxBarrHits" combineHits="true"> + <layer id="1" inner_r = "1.4*cm" outer_z = "6.25*cm"> + <slice material = "Silicon" thickness = "0.008*cm"/> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" /> + </layer> + <layer id="2" inner_r = "2.5*cm" outer_z = "6.25*cm"> + <slice material = "Silicon" thickness = "0.008*cm"/> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" /> + </layer> + <layer id="3" inner_r = "3.6*cm" outer_z = "6.25*cm"> + <slice material = "Silicon" thickness = "0.008*cm"/> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" /> + </layer> + <layer id="4" inner_r = "4.8*cm" outer_z = "6.25*cm" > + <slice material = "Silicon" thickness = "0.008*cm"/> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" /> + </layer> + <layer id="5" inner_r = "6.0*cm" outer_z = "6.25*cm"> + <slice material = "Silicon" thickness = "0.008*cm"/> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" /> + </layer> + </detector> + + + <detector id="12" name="VertexEndcap" type="DiskTracker" reflect="true" readout="VtxEndcapHits" combineHits="true"> + <layer id="1" inner_r = "1.6*cm" inner_z = "7.6*cm" outer_r = "7.5*cm"> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/> + <slice material = "Silicon" thickness = "0.020*cm" /> + </layer> + <layer id="2" inner_r = "1.6*cm" inner_z = "9.5*cm" outer_r = "7.5*cm"> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/> + <slice material = "Silicon" thickness = "0.020*cm" /> + </layer> + <layer id="3" inner_r = "2.0*cm" inner_z = "12.5*cm" outer_r = "7.5*cm"> + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/> + <slice material = "Silicon" thickness = "0.020*cm" /> + </layer> + <layer id="4" inner_r = "2.0*cm" inner_z = "18.0*cm" outer_r = "7.5*cm" > + <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/> + <slice material = "Silicon" thickness = "0.020*cm" /> + </layer> + </detector> + + <!-- Vertex supports and cryostat --> + + <detector id="0" name="VertexBarrelSupports" type="MultiLayerTracker"> + <layer id="1" inner_r = "7.0*cm" outer_z = "6.5*cm"> + <slice material = "Beryllium" thickness = "0.1*cm"/> + </layer> + <layer id="2" inner_r = "11.2*cm" outer_z = "24.0*cm"> + <slice material = "PolystyreneFoam" thickness = "1.5*cm"/> + </layer> + <layer id="3" inner_r = "11.18*cm" outer_z = "21.0*cm"> + <slice material = "Aluminum" thickness = "0.02*cm"/> + </layer> + </detector> + <detector id="0" name="VertexEndSupports" type="DiskTracker" reflect="true"> + <layer id="1" inner_r = "1.5*cm" inner_z = "6.5*cm" outer_r = "7.3*cm"> + <slice material = "G10" thickness = "0.58*cm" /> + </layer> + <layer id="2" inner_r = "2.34*cm" inner_z = "21.0*cm" outer_r = "11.2*cm"> + <slice material = "PolystyreneFoam" thickness = "3.0*cm" /> + </layer> + <layer id="3" inner_r = "2.34*cm" inner_z = "20.98*cm" outer_r = "11.2*cm"> + <slice material = "Aluminum" thickness = "0.02*cm" /> + </layer> + <layer id="4" inner_r = "1.6*cm" inner_z = "7.622*cm" outer_r = "2.3*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="5" inner_r = "1.6*cm" inner_z = "9.522*cm" outer_r = "2.3*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="6" inner_r = "2.0*cm" inner_z = "12.522*cm" outer_r = "2.7*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="7" inner_r = "2.0*cm" inner_z = "18.022*cm" outer_r = "2.7*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="8" inner_r = "6.8*cm" inner_z = "7.622*cm" outer_r = "7.5*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="9" inner_r = "6.8*cm" inner_z = "9.522*cm" outer_r = "7.5*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="10" inner_r = "6.8*cm" inner_z = "12.522*cm" outer_r = "7.5*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + <layer id="11" inner_r = "6.8*cm" inner_z = "18.022*cm" outer_r = "7.5*cm"> + <slice material = "Beryllium" thickness = "0.1*cm" /> + </layer> + </detector> + + + <!-- Barrel Tracker Supports --> + + <detector id="0" name="TrackerBarrelSupports" type="MultiLayerTracker"> + <layer id="1" inner_r = "18.000*cm" outer_z = "26.7*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="2" inner_r = "32.5*cm" outer_z = "46.0*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="3" inner_r = "47.0*cm" outer_z = "65.33*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="4" inner_r = "61.5*cm" outer_z = "84.66*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="5" inner_r = "76.0*cm" outer_z = "104.0*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="6" inner_r = "90.5*cm" outer_z = "123.33*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="7" inner_r = "105.0*cm" outer_z = "142.66*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + <layer id="8" inner_r = "119.300*cm" outer_z = "161.7*cm"> + <slice material = "CarbonFiber" thickness = "0.025*cm" /> + <slice material = "Rohacell31" thickness="1.3*cm" /> + <slice material = "CarbonFiber" thickness="0.025*cm" /> + </layer> + </detector> + + <!-- Barrel Tracker Modules --> +<!-- 061013 N. Graf equally fill outer tracker space with 8 barrels, barrel-disk transition at cos(theta) = .75 --> + <detector id="13" name="TrackerBarrel" type="MultiLayerTracker" readout="TkrBarrHits" combineHits="true"> + <layer id="1" inner_r = "20.000*cm" outer_z = "26.7*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0038*cm" /> + <slice material = "Copper" thickness = "0.00038*cm" /> + </layer> + <layer id="2" inner_r = "34.5*cm" outer_z = "46.0*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0051*cm" /> + <slice material = "Copper" thickness = "0.00052*cm" /> + </layer> + <layer id="3" inner_r = "49.0*cm" outer_z = "65.33*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0064*cm" /> + <slice material = "Copper" thickness = "0.00065*cm" /> + </layer> + <layer id="4" inner_r = "63.5*cm" outer_z = "84.66*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0078*cm" /> + <slice material = "Copper" thickness = "0.00079*cm" /> + </layer> + <layer id="5" inner_r = "78.0*cm" outer_z = "104.0*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="6" inner_r = "92.5*cm" outer_z = "123.33*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="7" inner_r = "107.0*cm" outer_z = "142.66*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="8" inner_r = "121.300*cm" outer_z = "161.7*cm"> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + </detector> + + <!-- Endcap Tracker Supports --> + + <detector id="0" name="TrackerEndcapSupports" type="DiskTracker" reflect="true"> + <layer id="1" inner_r = "4.0*cm" inner_z = "27.0*cm" outer_r = "25.000*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="2" inner_r = "6.13*cm" inner_z = "46.3*cm" outer_r = "39.48*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="3" inner_r = "8.26*cm" inner_z = "65.63*cm" outer_r = "53.98*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="4" inner_r = "10.39*cm" inner_z = "84.96*cm" outer_r = "68.49*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="5" inner_r = "12.53*cm" inner_z = "104.3*cm" outer_r = "83.00*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="6" inner_r = "14.66*cm" inner_z = "123.63*cm" outer_r = "97.50*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="7" inner_r = "16.80*cm" inner_z = "142.96*cm" outer_r = "112.01*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + <layer id="8" inner_r = "18.9*cm" inner_z = "162.0*cm" outer_r = "126.300*cm"> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + <slice material = "Rohacell31" thickness = "2.5*cm" /> + <slice material = "CarbonFiber" thickness = "0.039*cm" /> + </layer> + </detector> + + <!-- Endcap Tracker Modules --> +<!-- 061013 N. Graf inner_z is inner_z of support (see above) + 3. next station is +.4 --> + <detector id="14" name="TrackerEndcap" type="DiskTracker" reflect="true" readout="TkrEndcapHits" combineHits="true"> + <layer id="1" inner_r = "4.0*cm" inner_z = "30.0*cm" outer_r = "25.000*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0038*cm" /> + <slice material = "Copper" thickness = "0.00038*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="2" inner_r = "4.0*cm" inner_z = "30.4*cm" outer_r = "25.000*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0038*cm" /> + <slice material = "Copper" thickness = "0.00038*cm" /> + </layer> + <layer id="3" inner_r = "6.13*cm" inner_z = "49.3*cm" outer_r = "39.48*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0051*cm" /> + <slice material = "Copper" thickness = "0.00052*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="4" inner_r = "6.13*cm" inner_z = "49.7*cm" outer_r = "39.48*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0051*cm" /> + <slice material = "Copper" thickness = "0.00052*cm" /> + </layer> + <layer id="5" inner_r = "8.26*cm" inner_z = "68.63*cm" outer_r = "53.98*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0064*cm" /> + <slice material = "Copper" thickness = "0.00065*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="6" inner_r = "8.26*cm" inner_z = "69.03*cm" outer_r = "53.98*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0064*cm" /> + <slice material = "Copper" thickness = "0.00065*cm" /> + </layer> + <layer id="7" inner_r = "10.39*cm" inner_z = "87.96*cm" outer_r = "68.49*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0078*cm" /> + <slice material = "Copper" thickness = "0.00079*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="8" inner_r = "10.39*cm" inner_z = "88.36*cm" outer_r = "68.49*cm"> + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0078*cm" /> + <slice material = "Copper" thickness = "0.00079*cm" /> + </layer> + <layer id="9" inner_r = "12.53*cm" inner_z = "107.3*cm" outer_r = "83.00*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="10" inner_r = "12.53*cm" inner_z = "107.7*cm" outer_r = "83.00*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="11" inner_r = "14.66*cm" inner_z = "126.63*cm" outer_r = "97.50*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="12" inner_r = "14.66*cm" inner_z = "127.03*cm" outer_r = "97.5*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="13" inner_r = "16.80*cm" inner_z = "145.96*cm" outer_r = "112.01*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="14" inner_r = "16.80*cm" inner_z = "146.06*cm" outer_r = "112.01*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + <layer id="15" inner_r = "18.9*cm" inner_z = "165.0*cm" outer_r = "126.300*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + <slice material = "PEEK" thickness = "0.02*cm" /> + <slice material = "Rohacell31" thickness="0.14*cm" /> + <slice material = "Epoxy" thickness="0.0175*cm" /> + <slice material = "CarbonFiber" thickness=".016*cm" /> + </layer> + <layer id="16" inner_r = "18.9*cm" inner_z = "165.4*cm" outer_r = "126.300*cm" > + <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" /> + <slice material = "Silicon" thickness = "0.00048*cm" /> + <slice material = "Kapton" thickness = "0.0091*cm" /> + <slice material = "Copper" thickness = "0.00093*cm" /> + </layer> + </detector> + + <!-- Tracker Support Rings --> +<!-- do not uncomment without changing values. these are for the 5 layer tracker... -> + <detector id="0" name="TrackerSupportRings" type="DiskTracker" reflect="true"> + <layer id="1" inner_r = "18.000*cm" inner_z = "26.7*cm" outer_r = "44.300*cm"> + <slice material = "CarbonFiber" thickness = "0.15*cm" /> + </layer> + <layer id="2" inner_r = "44.300*cm" inner_z = "61.7*cm" outer_r = "70.500*cm"> + <slice material = "CarbonFiber" thickness = "0.15*cm" /> + </layer> + <layer id="3" inner_r = "70.500*cm" inner_z = "96.7*cm" outer_r = "96.800*cm"> + <slice material = "CarbonFiber" thickness = "0.15*cm" /> + </layer> + <layer id="4" inner_r = "96.800*cm" inner_z = "131.7*cm" outer_r = "119.300*cm"> + <slice material = "CarbonFiber" thickness = "0.15*cm" /> + </layer> + <layer id="5" inner_r = "119.300*cm" inner_z = "161.7*cm" outer_r = "126.5*cm"> + <slice material = "CarbonFiber" thickness = "0.15*cm" /> + </layer> + </detector> +--> + <!-- Tracker Readout/Power Distribution System --> +<!-- do not uncomment without changing values. these are for the 5 layer tracker... -> + <detector id="0" name="TrackerReadout" type="DiskTracker" reflect="true"> + <layer id="1" inner_r = "25.500*cm" inner_z = "27.0*cm" outer_r = "44.300*cm"> + <slice material = "G10" thickness = "0.057*cm" /> + <slice material = "Copper" thickness = "0.0038*cm" /> + </layer> + <layer id="2" inner_r = "51.800*cm" inner_z = "62.0*cm" outer_r = "70.500*cm"> + <slice material = "G10" thickness = "0.102*cm" /> + <slice material = "Copper" thickness = "0.0068*cm" /> + </layer> + <layer id="3" inner_r = "78.000*cm" inner_z = "97.0*cm" outer_r = "96.800*cm"> + <slice material = "G10" thickness = "0.108*cm" /> + <slice material = "Copper" thickness = "0.0072*cm" /> + </layer> + <layer id="4" inner_r = "104.300*cm" inner_z = "132.0*cm" outer_r = "119.300*cm"> + <slice material = "G10" thickness = "0.186*cm" /> + <slice material = "Copper" thickness = "0.0124*cm" /> + </layer> + <layer id="5" inner_r = "104.300*cm" inner_z = "167.0*cm" outer_r = "119.300*cm"> + <slice material = "G10" thickness = "0.246*cm" /> + <slice material = "Copper" thickness = "0.0164*cm" /> + </layer> + </detector> +--> + <!-- Electromagnetic calorimeter --> + + <detector id="2" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits"> + <dimensions inner_r = "127.0*cm" outer_z = "179.5*cm" /> + <layer repeat="30"> + <slice material = "Tungsten" thickness = "0.25*cm" /> + <slice material = "G10" thickness = "0.068*cm" /> + <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" /> + <slice material = "Air" thickness = "0.025*cm" /> + </layer> + </detector> + + <detector id="6" name="EMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHits"> + <dimensions inner_r = "26.0*cm" inner_z = "168.0*cm" outer_r = "126.5*cm" /> + <layer repeat="30" > + <slice material = "Tungsten" thickness = "0.25*cm" /> + <slice material = "G10" thickness = "0.068*cm" /> + <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" /> + <slice material = "Air" thickness = "0.025*cm" /> + </layer> + </detector> + + <!-- Hadronic calorimeter --> + + <detector id="3" name="HADBarrel" type="CylindricalBarrelCalorimeter" readout="HcalBarrHits"> + <dimensions inner_r = "138.5*cm" outer_z = "277.0*cm" /> + <layer repeat="34"> + <slice material = "Steel235" thickness = "2.0*cm" /> + <slice material = "G10" thickness = "0.3*cm" /> + <slice material = "PyrexGlass" thickness = "0.11*cm" /> + <slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" /> + <slice material = "PyrexGlass" thickness = "0.11*cm" /> + <slice material = "Air" thickness = "0.16*cm" /> + </layer> + </detector> + + <detector id="7" name="HADEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="HcalEndcapHits"> + <dimensions inner_r = "26.0*cm" inner_z = "179.5*cm" outer_r = "138.25*cm" /> + <layer repeat="34" > + <slice material = "Steel235" thickness = "2.0*cm" /> + <slice material = "G10" thickness = "0.3*cm" /> + <slice material = "PyrexGlass" thickness = "0.11*cm" /> + <slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" /> + <slice material = "PyrexGlass" thickness = "0.11*cm" /> + <slice material = "Air" thickness = "0.16*cm" /> + </layer> + </detector> + + <!-- Solenoid --> + <detector id="0" name="SolenoidCoilBarrel" type="MultiLayerTracker" insideTrackingVolume="false"> + <layer id="1" inner_r="250.0*cm" outer_z="271.0*cm"> + <slice material="Steel235" thickness="6.0*cm" /> + <slice material="Air" thickness="8.5*cm" /> + </layer> + <layer id="2" inner_r="264.5*cm" outer_z="262.5*cm"> + <slice material="Aluminum" thickness="39.3*cm" /> + <slice material="Steel235" thickness="6.0*cm" /> + </layer> + <layer id="3" inner_r="309.8*cm" outer_z="271.0*cm"> + <slice material="Air" thickness="20.0*cm" /> + <slice material="Steel235" thickness="3.0*cm" /> + </layer> + </detector> + + <detector id="0" name="SolenoidCoilEnds" type="DiskTracker" reflect="true" insideTrackingVolume="false"> + <layer id="1" inner_r="250.0*cm" inner_z="271.0*cm" outer_r="332.8*cm"> + <slice material="Steel235" thickness="6.0*cm" /> + </layer> + </detector> + + <!-- Muon system --> + <detector id="4" name="MuonBarrel" type="CylindricalBarrelCalorimeter" readout="MuonBarrHits"> + <dimensions inner_r="333.0*cm" outer_z="277.0*cm" /> + <layer repeat="48"> + <slice material="Iron" thickness="5.0*cm" /> + <slice material="G10" thickness="0.3*cm" /> + <slice material="PyrexGlass" thickness="0.11*cm" /> + <slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" /> + <slice material="PyrexGlass" thickness="0.11*cm" /> + <slice material="Air" thickness="0.86*cm" /> + </layer> + </detector> + + <detector id="8" name="MuonEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="MuonEndcapHits"> + <dimensions inner_r = "26.0*cm" inner_z = "277.5*cm" outer_r = "645.0*cm" /> + <layer repeat="48"> + <slice material="Iron" thickness="5.0*cm" /> + <slice material="G10" thickness="0.3*cm" /> + <slice material="PyrexGlass" thickness="0.11*cm" /> + <slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" /> + <slice material="PyrexGlass" thickness="0.11*cm" /> + <slice material="Air" thickness="0.86*cm" /> + </layer> + </detector> + + <!-- Forward Masks --> + <!-- sensitive calorimeter same as EM end cap --> + + <detector id="9" name="ForwardEMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="ForwardEcalEndcapHits"> + <dimensions inner_r = "8.69*cm" inner_z = "168.0*cm" outer_r = "25.0*cm" /> + <layer repeat="30" > + <slice material = "Tungsten" thickness = "0.25*cm" /> + <slice material = "G10" thickness = "0.068*cm" /> + <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" /> + <slice material = "Air" thickness = "0.025*cm" /> + </layer> + </detector> + + <!-- These are just the pole tips for the front mask --> + <detector id="0" name="ForwardEMMask" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Tungsten"/> + <zplane rmin = "8.14*cm" rmax="8.69*cm" z="168.0*cm" /> + <zplane rmin="8.68*cm" rmax="8.69*cm" z="179.25*cm"/> + </detector> + + <detector id="0" name="BackwardEMMask" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Tungsten"/> + <zplane rmin="8.68*cm" rmax="8.69*cm" z="-179.25*cm"/> + <zplane rmin = "8.14*cm" rmax="8.69*cm" z="-168.0*cm" /> + </detector> + + <!-- M1 begins at front of HCal end cap--> + + <detector id="0" name="ForwardM1" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Tungsten"/> + <zplane rmin = "8.68*cm" rmax="25.0*cm" z="179.5*cm" /> + <zplane rmin="16.0*cm" rmax="25.0*cm" z="330.0*cm"/> + </detector> + + <detector id="0" name="BackwardM1" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Tungsten"/> + <zplane rmin="16.0*cm" rmax="25.0*cm" z="-330.0*cm"/> + <zplane rmin = "8.68*cm" rmax="25.0*cm" z="-179.5*cm" /> + </detector> + + <!-- Low Z ( Be ) mask --> + <detector id="0" name="ForwardLowZ" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Beryllium"/> + <zplane rmin="1.5*cm" rmax="13.8*cm" z="285.0*cm"/> + <zplane rmin = "1.5*cm" rmax="14.28*cm" z="295.0*cm" /> + </detector> + + <detector id="0" name="BackwardLowZ" type="PolyconeSupport" insideTrackingVolume="false"> + <material name="Beryllium"/> + <zplane rmin="1.5*cm" rmax="14.28*cm" z="-295.0*cm"/> + <zplane rmin = "1.5*cm" rmax="13.8*cm" z="-285.0*cm" /> + </detector> + + <!-- Instrumented luminosity monitor --> + + <detector id="10" name="ForwardLuminosityMonitor" reflect="true" type="CylindricalEndcapCalorimeter" readout="LuminosityMonitorHits"> + <dimensions inner_r = "2.0*cm" inner_z = "295.0*cm" outer_r = "14.28*cm" /> + <layer repeat="50" > + <slice material = "Tungsten" thickness = "0.25*cm" /> + <slice material = "G10" thickness = "0.068*cm" /> + <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" /> + <slice material = "Air" thickness = "0.025*cm" /> + </layer> + </detector> + + </detectors> + + <!-- Sensitive Detector readout segmentation --> + <readouts> + <readout name="MuonBarrHits"> + <segmentation type="ProjectiveCylinder" thetaBins="150" phiBins="300"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="MuonEndcapHits"> + <segmentation type="ProjectiveZPlane" thetaBins="150" phiBins="300"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="HcalEndcapHits"> + <segmentation type="ProjectiveZPlane" thetaBins="600" phiBins="1200"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="HcalBarrHits"> + <segmentation type="ProjectiveCylinder" thetaBins="600" phiBins="1200"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="EcalEndcapHits"> + <segmentation type="ProjectiveZPlane" thetaBins="1024" phiBins="1024"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="ForwardEcalEndcapHits"> + <segmentation type="GridXYZ" gridSizeX="4.0" gridSizeY="4.0" /> + <id>layer:7,system:6,barrel:3,x:32:-11,y:-11</id> + </readout> + <readout name="LuminosityMonitorHits"> + <segmentation type="GridXYZ" gridSizeX="4.0" gridSizeY="4.0" /> + <id>layer:7,system:6,barrel:3,x:32:11,y:11</id> + </readout> + <readout name="EcalBarrHits"> + <segmentation type="ProjectiveCylinder" thetaBins="1000" phiBins="2000"/> + <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id> + </readout> + <readout name="TkrBarrHits"> + <id>layer:10,system:6,barrel:3</id> + </readout> + <readout name="TkrEndcapHits"> + <id>layer:10,system:6,barrel:3</id> + </readout> + <readout name="VtxBarrHits"> + <id>layer:10,system:6,barrel:3</id> + </readout> + <readout name="VtxEndcapHits"> + <id>layer:10,system:6,barrel:3</id> + </readout> + </readouts> + <fields> + <field type="Solenoid" name="GlobalSolenoid" + inner_field="5.0" + outer_field="-0.6" + zmax="1000" + outer_radius="(250.0+ 5.0 + 17.5 + 40./2.)*cm"/> <!-- SolenoidCoilBarrel inner_radius + Al support + Air gap + half coil--> + </fields> +</lccdd>
diff -N detector.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ detector.properties 17 Oct 2006 19:19:02 -0000 1.1 @@ -0,0 +1 @@
+name: sidaug05_8layertracker
diff -N IDEfficiency.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ IDEfficiency.properties 17 Oct 2006 19:19:02 -0000 1.1 @@ -0,0 +1,6 @@
+Electron: 1.0 +Muon: 1.0 +Neutron: 1.0 +Proton: 0.0 +Kaon: 0.0 +wt_charged_track_calorimeter_energy: 0.0
\ No newline at end of file
diff -N IndividualParticleReconstruction.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ IndividualParticleReconstruction.properties 17 Oct 2006 19:19:02 -0000 1.1 @@ -0,0 +1,13 @@
+EMCalorimeters: EMBarrel EMEndcap +HADCalorimeters: HADBarrel HADEndcap +MUCalorimeters: MuonBarrel MuonEndcap + +EMBarrelCalorimeter: EMBarrel +EMEndcapCalorimeter: EMEndcap + +HADBarrelCalorimeter: HADBarrel +HADEndcapCalorimeter: HADEndcap + +MUBarrelCalorimeter: MuonBarrel +MUEndcapCalorimeter: MuonEndcap +
diff -N Cheating.properties --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ Cheating.properties 17 Oct 2006 19:19:02 -0000 1.1 @@ -0,0 +1,28 @@
+FullTruth false +Truth false +ECalParameterization false +ReconPhotons true +HCalParameterization false +ReconNeutralHadrons true +Decays true +DecayProducts true +DecayNeutrals true +DecayDistance 100. +NuclearInteractions false +NuclearInteractionProducts false +NuclearInteractionNeutrals false +Radiation false +ECalResolution 0.18 +ECalSampling 0.012 +HCalResolution 0.60 +HCalSampling 0. +HCalDigital 11.7 +pTrackMin 0.100 +EClusterMin 0.100 +ECalEnergyMin 0.100 +HCalEnergyMin 0.250 +HitEnergyMin 0. +NDigitalMin 4 +PerfectEnergyFlow false +Distance2XCluster 50. +Distance4XCluster 100.