LCDetectors/detectors/sid01_planar_tracker
diff -u -r1.10 -r1.11
--- compact.xml 5 May 2008 21:00:49 -0000 1.10
+++ compact.xml 6 May 2008 00:13:56 -0000 1.11
@@ -7,7 +7,7 @@
title="Silicon Detector v01 with Planar Trackers"
author="Jeremy McCormick and Tim Nelson"
status="development"
- version="$Id: compact.xml,v 1.10 2008/05/05 21:00:49 jeremy Exp $">
+ version="$Id: compact.xml,v 1.11 2008/05/06 00:13:56 jeremy Exp $">
<comment></comment>
</info>
@@ -218,31 +218,6 @@
</layer>
</detector>
- <!--
- <detector id="11" name="VertexBarrel" type="MultiLayerTracker" readout="VtxBarrHits" combineHits="true">
- <layer id="1" inner_r = "1.461*cm" outer_z = "6.25*cm">
- <slice material = "Silicon" thickness = "0.0093*cm"/>
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" />
- </layer>
- <layer id="2" inner_r = "2.261*cm" outer_z = "6.25*cm">
- <slice material = "Silicon" thickness = "0.0093*cm"/>
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" />
- </layer>
- <layer id="3" inner_r = "3.541*cm" outer_z = "6.25*cm">
- <slice material = "Silicon" thickness = "0.0093*cm"/>
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" />
- </layer>
- <layer id="4" inner_r = "4.801*cm" outer_z = "6.25*cm" >
- <slice material = "Silicon" thickness = "0.0093*cm"/>
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" />
- </layer>
- <layer id="5" inner_r = "6.041*cm" outer_z = "6.25*cm">
- <slice material = "Silicon" thickness = "0.0093*cm"/>
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes" />
- </layer>
- </detector>
- -->
-
<detector id="12" name="SiVertexEndcap" type="SiTrackerEndcap" readout="SiVertexEndcap_RO">
<module name="SiVertexEndcapModule">
@@ -253,63 +228,24 @@
</module>
<layer id="1" inner_r="1.4*cm" outer_r="7.1*cm" inner_z="7.18*cm" thickness="0.1*cm" nwedges="12" module="SiVertexEndcapModule">
- <module_parameters r_size="10.0" phi_size_max="10.0" />
+ <module_parameters r_size="12.0" phi_size_max="12.0" />
</layer>
<layer id="2" inner_r="1.6*cm" outer_r="7.1*cm" inner_z="9.02*cm" thickness="0.1*cm" nwedges="12" module="SiVertexEndcapModule">
- <module_parameters r_size="10.0" phi_size_max="10.0" />
+ <module_parameters r_size="12.0" phi_size_max="12.0" />
</layer>
-
+
<layer id="3" inner_r="1.8*cm" outer_r="7.1*cm" inner_z="12.16*cm" thickness="0.1*cm" nwedges="12" module="SiVertexEndcapModule">
- <module_parameters r_size="10.0" phi_size_max="10.0" />
+ <module_parameters r_size="12.0" phi_size_max="12.0" />
</layer>
<layer id="4" inner_r="2.0*cm" outer_r="7.1*cm" inner_z="17.0*cm" thickness="0.1*cm" nwedges="12" module="SiVertexEndcapModule">
- <module_parameters r_size="10.0" phi_size_max="10.0" />
+ <module_parameters r_size="12.0" phi_size_max="12.0" />
</layer>
</detector>
-
- <!--
- <detector id="12" name="VertexEndcap" type="DiskTracker" reflect="true" readout="VtxEndcapHits" combineHits="true">
- <layer id="1" inner_r = "1.4*cm" inner_z = "7.18*cm" outer_r = "7.1*cm">
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/>
- <slice material = "Silicon" thickness = "0.0093*cm" />
- </layer>
- <layer id="2" inner_r = "1.6*cm" inner_z = "9.02*cm" outer_r = "7.1*cm">
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/>
- <slice material = "Silicon" thickness = "0.0093*cm" />
- </layer>
- <layer id="3" inner_r = "1.8*cm" inner_z = "12.16*cm" outer_r = "7.1*cm">
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/>
- <slice material = "Silicon" thickness = "0.0093*cm" />
- </layer>
- <layer id="4" inner_r = "2.0*cm" inner_z = "17.0*cm" outer_r = "7.1*cm" >
- <slice material = "Silicon" thickness = "0.002*cm" sensitive = "yes"/>
- <slice material = "Silicon" thickness = "0.0093*cm" />
- </layer>
- </detector>
- -->
-
<detector id="0" name="VertexBarrelSupports" type="MultiLayerTracker">
-<!--
- <layer id="1" inner_r = "1.43*cm" outer_z = "6.27*cm">
- <slice material = "CarbonFiber_25percent" thickness ="VXD_CF_sensor"/>
- </layer>
- <layer id="2" inner_r = "2.23*cm" outer_z = "6.27*cm">
- <slice material = "CarbonFiber_25percent" thickness ="VXD_CF_sensor"/>
- </layer>
- <layer id="3" inner_r = "3.51*cm" outer_z = "6.27*cm">
- <slice material = "CarbonFiber_25percent" thickness ="VXD_CF_sensor"/>
- </layer>
- <layer id="4" inner_r = "4.77*cm" outer_z = "6.27*cm">
- <slice material = "CarbonFiber_25percent" thickness ="VXD_CF_sensor"/>
- </layer>
- <layer id="5" inner_r = "6.01*cm" outer_z = "6.27*cm">
- <slice material = "CarbonFiber_25percent" thickness ="VXD_CF_sensor"/>
- </layer>
--->
<layer id="6" inner_r = "16.87*cm" outer_z = "89.48*cm">
<slice material = "CarbonFiber" thickness ="VXD_CF_support"/>
</layer>
@@ -318,27 +254,7 @@
</layer>
</detector>
- <detector id="0" name="VertexEndSupports" type="DiskTracker" reflect="true">
-<!--
- <layer id="1" inner_r = "1.44*cm" inner_z = "6.27*cm" outer_r = "7.16*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
- <layer id="2" inner_r = "1.44*cm" inner_z = "6.30*cm" outer_r = "16.87*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
- <layer id="3" inner_r = "1.395*cm" inner_z = "7.21*cm" outer_r = "16.87*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
- <layer id="4" inner_r = "1.595*cm" inner_z = "9.05*cm" outer_r = "16.87*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
- <layer id="5" inner_r = "1.795*cm" inner_z = "12.19*cm" outer_r = "16.87*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
- <layer id="6" inner_r = "1.995*cm" inner_z = "17.03*cm" outer_r = "16.87*cm">
- <slice material = "CarbonFiber_25percent" thickness = "VXD_CF_sensor" />
- </layer>
--->
+ <detector id="0" name="VertexEndSupports" type="DiskTracker" reflect="true">
<layer id="7" inner_r = "4.80*cm" inner_z = "86.88*cm" outer_r = "16.87*cm">
<slice material = "CarbonFiber" thickness = "VXD_CF_support" />
</layer>
@@ -429,7 +345,6 @@
</layer>
</detector>
-
<detector id="13" name="SiTrackerBarrel" type="SiTrackerBarrel" readout="SiTrackerBarrel_RO">
<module name="SiTrackerModule_Layer0">
@@ -494,7 +409,6 @@
<position z="0.07475*cm" />
</module_component>
- <!-- half of total CarbonFiber -->
<module_component width="97.79" length="97.79" thickness="0.016*cm" material="CarbonFiber_50D" sensitive="false">
<position z="0.0915*cm" />
</module_component>
@@ -537,7 +451,6 @@
<position z="0.07475*cm" />
</module_component>
- <!-- half of total CarbonFiber -->
<module_component width="97.79" length="97.79" thickness="0.016*cm" material="CarbonFiber_50D" sensitive="false">
<position z="0.0915*cm" />
</module_component>
@@ -580,7 +493,6 @@
<position z="0.07475*cm" />
</module_component>
- <!-- half of total CarbonFiber -->
<module_component width="97.79" length="97.79" thickness="0.016*cm" material="CarbonFiber_50D" sensitive="false">
<position z="0.0915*cm" />
</module_component>
@@ -623,7 +535,6 @@
<position z="0.07475*cm" />
</module_component>
- <!-- half of total CarbonFiber -->
<module_component width="97.79" length="97.79" thickness="0.016*cm" material="CarbonFiber_50D" sensitive="false">
<position z="0.0915*cm" />
</module_component>
@@ -680,61 +591,6 @@
</detector>
- <!--
- <detector id="13" name="TrackerBarrel" type="MultiLayerTracker" readout="TkrBarrHits" combineHits="true">
- <layer id="1" inner_r = "21.800*cm" outer_z = "55.8*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.28*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- <layer id="2" inner_r = "46.800*cm" outer_z = "82.5*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.28*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- </layer>
- <layer id="3" inner_r = "71.800*cm" outer_z = "108.3*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.28*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- </layer>
- <layer id="4" inner_r = "96.800*cm" outer_z = "134.7*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.28*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- </layer>
- <layer id="5" inner_r = "121.800*cm" outer_z = "160.6*cm">
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.28*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- </layer>
- </detector>
- -->
-
<detector id="0" name="TrackerEndcapSupports" type="DiskTracker" reflect="true" >
<layer id="1" inner_r = "20.5*cm" inner_z = "84.5*cm" outer_r = "51.0*cm">
<slice material = "CarbonFiber" thickness = "0.05*cm" />
@@ -758,7 +614,6 @@
</layer>
</detector>
-
<detector id="14" name="SiTrackerEndcap" type="SiTrackerEndcap" readout="SiTrackerEndcap_RO">
<module name="SiTrackerEndcapModule_Layer0">
@@ -821,7 +676,6 @@
<module_component thickness="0.00093*cm" material="Copper" />
</module>
- <!-- Endcap Tracker Layers -->
<layer id="4" inner_r="207.0" outer_r="499.0" inner_z="855.0" thickness="10.0" nwedges="24" module="SiTrackerEndcapModule_Layer0">
<module_parameters r_size="84.0" phi_size_max="80" />
</layer>
@@ -840,76 +694,7 @@
</detector>
-
- <!--
- <detector id="14" name="TrackerEndcap" type="DiskTracker" reflect="true" readout="TkrEndcapHits" combineHits="true">
- <layer id="1" inner_r = "20.7*cm" inner_z = "85.5*cm" outer_r = "49.4*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="2" inner_r = "20.7*cm" inner_z = "85.9*cm" outer_r = "49.4*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0051*cm" />
- <slice material = "Copper" thickness = "0.00052*cm" />
- </layer>
- <layer id="3" inner_r = "20.7*cm" inner_z = "111.4*cm" outer_r = "74.7*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="4" inner_r = "20.7*cm" inner_z = "111.8*cm" outer_r = "74.7*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0064*cm" />
- <slice material = "Copper" thickness = "0.00065*cm" />
- </layer>
- <layer id="5" inner_r = "20.7*cm" inner_z = "137.8*cm" outer_r = "99.9*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="6" inner_r = "20.7*cm" inner_z = "138.2*cm" outer_r = "99.9*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0078*cm" />
- <slice material = "Copper" thickness = "0.00079*cm" />
- </layer>
- <layer id="7" inner_r = "20.7*cm" inner_z = "163.6*cm" outer_r = "125.0*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="8" inner_r = "20.7*cm" inner_z = "164.0*cm" outer_r = "125.0*cm" >
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0091*cm" />
- <slice material = "Copper" thickness = "0.00093*cm" />
- </layer>
- </detector>
- -->
-
+<!--
<detector id="0" name="TrackerForwardSupports" type="DiskTracker" reflect="true">
<layer id="1" inner_r = "2.68*cm" inner_z = "21.18*cm" outer_r = "16.87*cm">
<slice material = "CarbonFiber" thickness = "0.05*cm" />
@@ -927,7 +712,7 @@
<slice material = "CarbonFiber" thickness = "0.05*cm" />
</layer>
</detector>
-
+-->
<detector id="15" name="SiTrackerForward" type="SiTrackerEndcap" readout="SiTrackerForward_RO">
@@ -945,311 +730,257 @@
<module_component thickness="0.0038*cm" material="Kapton" />
<module_component thickness="0.00038*cm" material="Copper" />
</module>
-
- <!-- Forward Tracker Layers -->
+
<layer id="1" inner_r="27.800" outer_r="166.7" inner_z="204.0" thickness="5.0" nwedges="24" module="SiTrackerForwardModule">
- <module_parameters r_size="41.1" phi_size_max="50" />
+ <module_parameters r_size="50.2" phi_size_max="50" />
</layer>
<layer id="2" inner_r="75.1" outer_r="166.7" inner_z="538.5" thickness="5.0" nwedges="24" module="SiTrackerForwardModule">
- <module_parameters r_size="41.1" phi_size_max="50" />
+ <module_parameters r_size="50.2" phi_size_max="50" />
</layer>
<layer id="3" inner_r="116.5" outer_r="166.7" inner_z="829.5" thickness="5.0" nwedges="24" module="SiTrackerForwardModule">
- <module_parameters r_size="41.4" phi_size_max="50" />
+ <module_parameters r_size="50.2" phi_size_max="50" />
</layer>
</detector>
- <!--
- <detector id="15" name="TrackerForward" type="DiskTracker" reflect="true" readout="TkrForwardHits">
- <layer id="1" inner_r = "2.78*cm" inner_z = "20.4*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="2" inner_r = "2.78*cm" inner_z = "20.80*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- <layer id="3" inner_r = "7.51*cm" inner_z = "53.85*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="4" inner_r = "7.51*cm" inner_z = "54.25*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- <layer id="5" inner_r = "11.65*cm" inner_z = "82.95*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- <slice material = "PEEK" thickness = "0.02*cm" />
- <slice material = "Rohacell31_50percent" thickness="0.3*cm" />
- <slice material = "Epoxy" thickness="0.0175*cm" />
- <slice material = "CarbonFiber" thickness=".016*cm" />
- </layer>
- <layer id="6" inner_r = "11.65*cm" inner_z = "83.35*cm" outer_r = "16.67*cm">
- <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
- <slice material = "Silicon" thickness = "0.00048*cm" />
- <slice material = "Kapton" thickness = "0.0038*cm" />
- <slice material = "Copper" thickness = "0.00038*cm" />
- </layer>
- </detector>
-
-<detector id="0" name="TrackerSupportRings" type="DiskTracker" reflect="true">
-<layer id="1" inner_r = "21.5*cm" inner_z = "57.0*cm" outer_r = "45.6*cm">
-<slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
-</layer>
-<layer id="2" inner_r = "46.5*cm" inner_z = "83.6*cm" outer_r = "70.6*cm">
-<slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
-</layer>
-<layer id="3" inner_r = "71.5*cm" inner_z = "109.5*cm" outer_r = "95.6*cm">
-<slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
-</layer>
-<layer id="4" inner_r = "96.5*cm" inner_z = "135.9*cm" outer_r = "120.6*cm">
-<slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
-</layer>
-<layer id="5" inner_r = "121.5*cm" inner_z = "161.7*cm" outer_r = "126.5*cm">
-<slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
-</layer>
-</detector>
-
-<detector id="0" name="TrackerReadout" type="DiskTracker" reflect="true">
-<layer id="1" inner_r = "25.7*cm" inner_z = "57.1*cm" outer_r = "45.6*cm">
-<slice material = "G10" thickness = "0.057*cm" />
-<slice material = "Copper" thickness = "0.0038*cm" />
-</layer>
-<layer id="2" inner_r = "51.0*cm" inner_z = "83.7*cm" outer_r = "70.6*cm">
-<slice material = "G10" thickness = "0.102*cm" />
-<slice material = "Copper" thickness = "0.0068*cm" />
-</layer>
-<layer id="3" inner_r = "76.3*cm" inner_z = "109.6*cm" outer_r = "95.6*cm">
-<slice material = "G10" thickness = "0.108*cm" />
-<slice material = "Copper" thickness = "0.0072*cm" />
-</layer>
-<layer id="4" inner_r = "101.3*cm" inner_z = "136.0*cm" outer_r = "120.6*cm">
-<slice material = "G10" thickness = "0.186*cm" />
-<slice material = "Copper" thickness = "0.0124*cm" />
-</layer>
-<layer id="5" inner_r = "101.3*cm" inner_z = "167.0*cm" outer_r = "120.6*cm">
-<slice material = "G10" thickness = "0.246*cm" />
-<slice material = "Copper" thickness = "0.0164*cm" />
-</layer>
-</detector>
-
-<detector id="2" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits">
-<dimensions inner_r = "127.0*cm" outer_z = "182.0*cm" />
-<layer repeat="1">
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-<layer repeat="20">
-<slice material = "TungstenDens24" thickness = "0.25*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-<layer repeat="10">
-<slice material = "TungstenDens24" thickness = "0.5*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-</detector>
-
-<detector id="6" name="EMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHits">
-<dimensions inner_r = "26.0*cm" inner_z = "168.0*cm" outer_r = "126.5*cm" />
-<layer repeat="1">
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-<layer repeat="20">
-<slice material = "TungstenDens24" thickness = "0.25*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-<layer repeat="10">
-<slice material = "TungstenDens24" thickness = "0.5*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-</detector>
-
-<detector id="3" name="HADBarrel" type="CylindricalBarrelCalorimeter" readout="HcalBarrHits">
-<dimensions inner_r = "141.0*cm" outer_z = "277.2*cm" />
-<layer repeat="34">
-<slice material = "Steel235" thickness = "2.0*cm" />
-<slice material = "G10" thickness = "0.3*cm" />
-<slice material = "PyrexGlass" thickness = "0.11*cm" />
-<slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" />
-<slice material = "PyrexGlass" thickness = "0.11*cm" />
-<slice material = "Air" thickness = "0.16*cm" />
-</layer>
-</detector>
-
-<detector id="7" name="HADEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="HcalEndcapHits">
-<dimensions inner_r = "26.0*cm" inner_z = "182.0*cm" outer_r = "140.75*cm" />
-<layer repeat="34" >
-<slice material = "Steel235" thickness = "2.0*cm" />
-<slice material = "G10" thickness = "0.3*cm" />
-<slice material = "PyrexGlass" thickness = "0.11*cm" />
-<slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" />
-<slice material = "PyrexGlass" thickness = "0.11*cm" />
-<slice material = "Air" thickness = "0.16*cm" />
-</layer>
-</detector>
-
-<detector id="0" name="SolenoidCoilBarrel" type="MultiLayerTracker" insideTrackingVolume="false">
-<layer id="1" inner_r="250.0*cm" outer_z="271.0*cm">
-<slice material="Steel235" thickness="6.0*cm" />
-<slice material="Air" thickness="8.5*cm" />
-</layer>
-<layer id="2" inner_r="264.5*cm" outer_z="262.5*cm">
-<slice material="Aluminum" thickness="39.3*cm" />
-<slice material="Steel235" thickness="6.0*cm" />
-</layer>
-<layer id="3" inner_r="309.8*cm" outer_z="271.0*cm">
-<slice material="Air" thickness="20.0*cm" />
-<slice material="Steel235" thickness="3.0*cm" />
-</layer>
-</detector>
-
-<detector id="0" name="SolenoidCoilEnds" type="DiskTracker" reflect="true" insideTrackingVolume="false">
-<layer id="1" inner_r="250.0*cm" inner_z="271.0*cm" outer_r="332.8*cm">
-<slice material="Steel235" thickness="6.0*cm" />
-</layer>
-</detector>
-
-<detector id="4" name="MuonBarrel" type="CylindricalBarrelCalorimeter" readout="MuonBarrHits">
-<dimensions inner_r="333.0*cm" outer_z="277.0*cm" />
-<layer repeat="48">
-<slice material="Iron" thickness="5.0*cm" />
-<slice material="G10" thickness="0.3*cm" />
-<slice material="PyrexGlass" thickness="0.11*cm" />
-<slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" />
-<slice material="PyrexGlass" thickness="0.11*cm" />
-<slice material="Air" thickness="0.86*cm" />
-</layer>
-</detector>
-
-<detector id="8" name="MuonEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="MuonEndcapHits">
-<dimensions inner_r = "26.0*cm" inner_z = "277.5*cm" outer_r = "645.0*cm" />
-<layer repeat="48">
-<slice material="Iron" thickness="5.0*cm" />
-<slice material="G10" thickness="0.3*cm" />
-<slice material="PyrexGlass" thickness="0.11*cm" />
-<slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" />
-<slice material="PyrexGlass" thickness="0.11*cm" />
-<slice material="Air" thickness="0.86*cm" />
-</layer>
-</detector>
-
-<detector id="9" name="ForwardEMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="ForwardEcalEndcapHits">
-<dimensions inner_r = "8.69*cm" inner_z = "168.0*cm" outer_r = "25.0*cm" />
-<layer repeat="20" >
-<slice material = "TungstenDens24" thickness = "0.271*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-<layer repeat="10" >
-<slice material = "TungstenDens24" thickness = "0.543*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-</detector>
-
-<detector id="0" name="ForwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="TungstenDens24"/>
-<zplane rmin = "8.14*cm" rmax="8.69*cm" z="168.0*cm" />
-<zplane rmin="8.68*cm" rmax="8.69*cm" z="181.75*cm"/>
-</detector>
-
-<detector id="0" name="BackwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="TungstenDens24"/>
-<zplane rmin="8.68*cm" rmax="8.69*cm" z="-181.75*cm"/>
-<zplane rmin = "8.14*cm" rmax="8.69*cm" z="-168.0*cm" />
-</detector>
-
-<detector id="0" name="ForwardM1" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="TungstenDens24"/>
-<zplane rmin = "8.68*cm" rmax="25.0*cm" z="182.0*cm" />
-<zplane rmin="16.0*cm" rmax="25.0*cm" z="330.0*cm"/>
-</detector>
-
-<detector id="0" name="BackwardM1" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="TungstenDens24"/>
-<zplane rmin="16.0*cm" rmax="25.0*cm" z="-330.0*cm"/>
-<zplane rmin = "8.68*cm" rmax="25.0*cm" z="-182.0*cm" />
-</detector>
-
-<detector id="0" name="ForwardLowZ" type="ForwardDetector" reflect="true" >
-<dimensions outer_r="13.80*cm"
-inner_r="0.0*cm"
-inner_z="285.0*cm"
-/>
-<beampipe crossing_angle="0.014"
-outgoing_r="1.2*cm"
-incoming_r="1.0*cm"
-/>
-<layer repeat="1">
-<slice material = "Beryllium" thickness = "10.0*cm" sensitive = "no" />
-</layer>
-</detector>
-
-<detector id="10" name="ForwardLuminosityMonitor" reflect="true" type="CylindricalEndcapCalorimeter" readout="LuminosityMonitorHits">
-<dimensions inner_r = "2.0*cm" inner_z = "295.0*cm" outer_r = "14.28*cm" />
-<layer repeat="50" >
-<slice material = "TungstenDens24" thickness = "0.271*cm" />
-<slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
-<slice material = "Copper" thickness = "0.005*cm" />
-<slice material = "Kapton" thickness = "0.030*cm" />
-<slice material = "Air" thickness = "0.033*cm" />
-</layer>
-</detector>
-
-<detector id="0" name="ForwardVacuum" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="Vacuum"/>
-<zplane rmin="0.*cm" rmax="((tracking_region_zmax-6.25)*bp_cone_slope+1.1925)" z="tracking_region_zmax" />
-<zplane rmin="0.*cm" rmax="13.8*cm" z="285*cm"/>
-</detector>
-
-<detector id="0" name="BackwardVacuum" type="PolyconeSupport" insideTrackingVolume="false">
-<material name="Vacuum"/>
-<zplane rmin="0.*cm" rmax="13.8*cm" z="-285*cm"/>
-<zplane rmin="0.*cm" rmax="((tracking_region_zmax-6.25)*bp_cone_slope+1.1925)" z="-tracking_region_zmax" />
-</detector>
- -->
+ <detector id="0" name="TrackerSupportRings" type="DiskTracker" reflect="true">
+ <layer id="1" inner_r = "21.5*cm" inner_z = "57.0*cm" outer_r = "45.6*cm">
+ <slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
+ </layer>
+ <layer id="2" inner_r = "46.5*cm" inner_z = "83.6*cm" outer_r = "70.6*cm">
+ <slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
+ </layer>
+ <layer id="3" inner_r = "71.5*cm" inner_z = "109.5*cm" outer_r = "95.6*cm">
+ <slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
+ </layer>
+ <layer id="4" inner_r = "96.5*cm" inner_z = "135.9*cm" outer_r = "120.6*cm">
+ <slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
+ </layer>
+ <layer id="5" inner_r = "121.5*cm" inner_z = "161.7*cm" outer_r = "126.5*cm">
+ <slice material = "CarbonFiber_15percent" thickness = "0.05*cm" />
+ </layer>
+ </detector>
+
+ <detector id="0" name="TrackerReadout" type="DiskTracker" reflect="true">
+ <layer id="1" inner_r = "25.7*cm" inner_z = "57.1*cm" outer_r = "45.6*cm">
+ <slice material = "G10" thickness = "0.057*cm" />
+ <slice material = "Copper" thickness = "0.0038*cm" />
+ </layer>
+ <layer id="2" inner_r = "51.0*cm" inner_z = "83.7*cm" outer_r = "70.6*cm">
+ <slice material = "G10" thickness = "0.102*cm" />
+ <slice material = "Copper" thickness = "0.0068*cm" />
+ </layer>
+ <layer id="3" inner_r = "76.3*cm" inner_z = "109.6*cm" outer_r = "95.6*cm">
+ <slice material = "G10" thickness = "0.108*cm" />
+ <slice material = "Copper" thickness = "0.0072*cm" />
+ </layer>
+ <layer id="4" inner_r = "101.3*cm" inner_z = "136.0*cm" outer_r = "120.6*cm">
+ <slice material = "G10" thickness = "0.186*cm" />
+ <slice material = "Copper" thickness = "0.0124*cm" />
+ </layer>
+ <layer id="5" inner_r = "101.3*cm" inner_z = "167.0*cm" outer_r = "120.6*cm">
+ <slice material = "G10" thickness = "0.246*cm" />
+ <slice material = "Copper" thickness = "0.0164*cm" />
+ </layer>
+ </detector>
+
+ <detector id="2" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits">
+ <dimensions inner_r = "127.0*cm" outer_z = "182.0*cm" />
+ <layer repeat="1">
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ <layer repeat="20">
+ <slice material = "TungstenDens24" thickness = "0.25*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ <layer repeat="10">
+ <slice material = "TungstenDens24" thickness = "0.5*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ </detector>
+
+ <detector id="6" name="EMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHits">
+ <dimensions inner_r = "26.0*cm" inner_z = "168.0*cm" outer_r = "126.5*cm" />
+ <layer repeat="1">
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ <layer repeat="20">
+ <slice material = "TungstenDens24" thickness = "0.25*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ <layer repeat="10">
+ <slice material = "TungstenDens24" thickness = "0.5*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ </detector>
+
+ <detector id="3" name="HADBarrel" type="CylindricalBarrelCalorimeter" readout="HcalBarrHits">
+ <dimensions inner_r = "141.0*cm" outer_z = "277.2*cm" />
+ <layer repeat="34">
+ <slice material = "Steel235" thickness = "2.0*cm" />
+ <slice material = "G10" thickness = "0.3*cm" />
+ <slice material = "PyrexGlass" thickness = "0.11*cm" />
+ <slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" />
+ <slice material = "PyrexGlass" thickness = "0.11*cm" />
+ <slice material = "Air" thickness = "0.16*cm" />
+ </layer>
+ </detector>
+
+ <detector id="7" name="HADEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="HcalEndcapHits">
+ <dimensions inner_r = "26.0*cm" inner_z = "182.0*cm" outer_r = "140.75*cm" />
+ <layer repeat="34" >
+ <slice material = "Steel235" thickness = "2.0*cm" />
+ <slice material = "G10" thickness = "0.3*cm" />
+ <slice material = "PyrexGlass" thickness = "0.11*cm" />
+ <slice material = "RPCGasDefault" thickness = "0.12*cm" sensitive = "yes" />
+ <slice material = "PyrexGlass" thickness = "0.11*cm" />
+ <slice material = "Air" thickness = "0.16*cm" />
+ </layer>
+ </detector>
+
+ <detector id="0" name="SolenoidCoilBarrel" type="MultiLayerTracker" insideTrackingVolume="false">
+ <layer id="1" inner_r="250.0*cm" outer_z="271.0*cm">
+ <slice material="Steel235" thickness="6.0*cm" />
+ <slice material="Air" thickness="8.5*cm" />
+ </layer>
+ <layer id="2" inner_r="264.5*cm" outer_z="262.5*cm">
+ <slice material="Aluminum" thickness="39.3*cm" />
+ <slice material="Steel235" thickness="6.0*cm" />
+ </layer>
+ <layer id="3" inner_r="309.8*cm" outer_z="271.0*cm">
+ <slice material="Air" thickness="20.0*cm" />
+ <slice material="Steel235" thickness="3.0*cm" />
+ </layer>
+ </detector>
+
+ <detector id="0" name="SolenoidCoilEnds" type="DiskTracker" reflect="true" insideTrackingVolume="false">
+ <layer id="1" inner_r="250.0*cm" inner_z="271.0*cm" outer_r="332.8*cm">
+ <slice material="Steel235" thickness="6.0*cm" />
+ </layer>
+ </detector>
+
+ <detector id="4" name="MuonBarrel" type="CylindricalBarrelCalorimeter" readout="MuonBarrHits">
+ <dimensions inner_r="333.0*cm" outer_z="277.0*cm" />
+ <layer repeat="48">
+ <slice material="Iron" thickness="5.0*cm" />
+ <slice material="G10" thickness="0.3*cm" />
+ <slice material="PyrexGlass" thickness="0.11*cm" />
+ <slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" />
+ <slice material="PyrexGlass" thickness="0.11*cm" />
+ <slice material="Air" thickness="0.86*cm" />
+ </layer>
+ </detector>
+
+ <detector id="8" name="MuonEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="MuonEndcapHits">
+ <dimensions inner_r = "26.0*cm" inner_z = "277.5*cm" outer_r = "645.0*cm" />
+ <layer repeat="48">
+ <slice material="Iron" thickness="5.0*cm" />
+ <slice material="G10" thickness="0.3*cm" />
+ <slice material="PyrexGlass" thickness="0.11*cm" />
+ <slice material="RPCGasDefault" thickness="0.12*cm" sensitive="yes" />
+ <slice material="PyrexGlass" thickness="0.11*cm" />
+ <slice material="Air" thickness="0.86*cm" />
+ </layer>
+ </detector>
+
+ <detector id="9" name="ForwardEMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="ForwardEcalEndcapHits">
+ <dimensions inner_r = "8.69*cm" inner_z = "168.0*cm" outer_r = "25.0*cm" />
+ <layer repeat="20" >
+ <slice material = "TungstenDens24" thickness = "0.271*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ <layer repeat="10" >
+ <slice material = "TungstenDens24" thickness = "0.543*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ </detector>
+
+ <detector id="0" name="ForwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="TungstenDens24"/>
+ <zplane rmin = "8.14*cm" rmax="8.69*cm" z="168.0*cm" />
+ <zplane rmin="8.68*cm" rmax="8.69*cm" z="181.75*cm"/>
+ </detector>
+
+ <detector id="0" name="BackwardEMMask" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="TungstenDens24"/>
+ <zplane rmin="8.68*cm" rmax="8.69*cm" z="-181.75*cm"/>
+ <zplane rmin = "8.14*cm" rmax="8.69*cm" z="-168.0*cm" />
+ </detector>
+
+ <detector id="0" name="ForwardM1" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="TungstenDens24"/>
+ <zplane rmin = "8.68*cm" rmax="25.0*cm" z="182.0*cm" />
+ <zplane rmin="16.0*cm" rmax="25.0*cm" z="330.0*cm"/>
+ </detector>
+
+ <detector id="0" name="BackwardM1" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="TungstenDens24"/>
+ <zplane rmin="16.0*cm" rmax="25.0*cm" z="-330.0*cm"/>
+ <zplane rmin = "8.68*cm" rmax="25.0*cm" z="-182.0*cm" />
+ </detector>
+
+ <detector id="0" name="ForwardLowZ" type="ForwardDetector" reflect="true" >
+ <dimensions outer_r="13.80*cm"
+ inner_r="0.0*cm"
+ inner_z="285.0*cm"
+ />
+ <beampipe crossing_angle="0.014"
+ outgoing_r="1.2*cm"
+ incoming_r="1.0*cm"
+ />
+ <layer repeat="1">
+ <slice material = "Beryllium" thickness = "10.0*cm" sensitive = "no" />
+ </layer>
+ </detector>
+
+ <detector id="10" name="ForwardLuminosityMonitor" reflect="true" type="CylindricalEndcapCalorimeter" readout="LuminosityMonitorHits">
+ <dimensions inner_r = "2.0*cm" inner_z = "295.0*cm" outer_r = "14.28*cm" />
+ <layer repeat="50" >
+ <slice material = "TungstenDens24" thickness = "0.271*cm" />
+ <slice material = "Silicon" thickness = "0.032*cm" sensitive = "yes" />
+ <slice material = "Copper" thickness = "0.005*cm" />
+ <slice material = "Kapton" thickness = "0.030*cm" />
+ <slice material = "Air" thickness = "0.033*cm" />
+ </layer>
+ </detector>
+
+ <detector id="0" name="ForwardVacuum" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="Vacuum"/>
+ <zplane rmin="0.*cm" rmax="((tracking_region_zmax-6.25)*bp_cone_slope+1.1925)" z="tracking_region_zmax" />
+ <zplane rmin="0.*cm" rmax="13.8*cm" z="285*cm"/>
+ </detector>
+
+ <detector id="0" name="BackwardVacuum" type="PolyconeSupport" insideTrackingVolume="false">
+ <material name="Vacuum"/>
+ <zplane rmin="0.*cm" rmax="13.8*cm" z="-285*cm"/>
+ <zplane rmin="0.*cm" rmax="((tracking_region_zmax-6.25)*bp_cone_slope+1.1925)" z="-tracking_region_zmax" />
+ </detector>
</detectors>
