Commit in hps-detectors/detectors/HPS-TestRun-v2 on MAIN | |||
compact.xml | +16 | -22 | 1.8 -> 1.9 |
add X displacement; this is probably done wrong in that the coordinate center is off from the one used in the survey AND/OR the displacement should be negative
diff -u -r1.8 -r1.9 --- compact.xml 29 May 2012 21:39:19 -0000 1.8 +++ compact.xml 4 Jun 2012 23:36:57 -0000 1.9 @@ -3,31 +3,38 @@
xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd"> <info name="HPS-TestRun-v2">
- <comment>HPS Test Proposal detector explicit SVT module placements</comment>
+ <comment>HPS JLab Test Run detector</comment>
</info> <define>
+
<!-- world --> <constant name="world_side" value="500.0*cm" /> <constant name="world_x" value="world_side" /> <constant name="world_y" value="world_side" /> <constant name="world_z" value="world_side" />
+
<!-- tracking region --> <constant name="tracking_region_radius" value="200.0*cm"/> <constant name="tracking_region_min" value="5.0*cm"/> <constant name="tracking_region_zmax" value="100.0*cm"/>
+ + <!-- ECAL --> + <constant name="ecal_front" value="13.3/2*mm" /> + <constant name="ecal_back" value="16/2*mm" /> + <constant name="ecal_z" value="160/2*mm" /> + <constant name="ecal_dx" value="41.27*mm" /> +
<!-- SVT module dimensions --> <constant name="moduleLength" value="100.0"/> <constant name="moduleWidth" value="40.34"/>
+
<!-- SVT sensor dimensions --> <constant name="sensorLength" value="98.33"/>
+
<!-- Sensor width slightly less than 38.34 mm so sisim works. --> <constant name="sensorWidth" value="38.3399"/>
- <!-- ECAL --> - <constant name="ecal_front" value="13.3/2*mm" /> - <constant name="ecal_back" value="16/2*mm" /> - <constant name="ecal_z" value="160/2*mm" /> -
+
<!-- positions derived from drawing assuming 1.35/1.2 degress open on top/bottom --> <constant name="x_rot_top" value="-0.0235619449" /> <constant name="x_rot_bot" value="0.020943951" />
@@ -202,23 +209,13 @@
<comment>The crystal ECal</comment> <material name="LeadTungstate" /> <dimensions x1="ecal_front" y1="ecal_front" x2="ecal_back" y2="ecal_back" z="ecal_z" />
- <!-- <layout beamgap="20.0*mm" nx="46" ny="5" dface="137.0*cm">--> - <!-- Measurements as found in installation by Stepan -->
+ <!-- Measurements as found in installation by Stepan -->
<layout beamgap="37.0*mm" nx="46" ny="5" dface="152.4*cm"> <remove ixmin="-10" ixmax="-2" iymin="-1" iymax="1" />
+ <top dx="ecal_dx" dy="0." dz="0."/> + <bottom dx="ecal_dx" dy="0." dz="0."/>
</layout> </detector>
-<!-- <detector id="10" name="Target" type="SiTrackerSpectrometer" readout="TargetHits" reflect="false"> - <comment>The Tungsten fixed target</comment> - <module name="TungstenTarget"> - <trd x1="5*cm" x2="5*cm" z="5*cm" /> - <module_component thickness="0.3504*cm*0.00125" material="Tungsten" sensitive="false"/> - </module> - <layer id="1"> - <quadrant xStart="0" nx="1" xStep="moduleLength" yStart="0" ny="1" yStep="moduleWidth" phi0="0.0" z="0.0" dz="0.0*cm" module="TungstenTarget"/> - </layer> - </detector>--> -
</detectors> <readouts>
@@ -229,9 +226,6 @@
<segmentation type="GridXYZ" gridSizeX="0.0" gridSizeY="0.0" gridSizeZ="0.0" /> <id>system:6,layer:2,ix:-8,iy:-6</id> </readout>
- <readout name="TargetHits"> - <id>system:6,barrel:3,layer:4,wedge:4,module:12,sensor:1,side:32:-2,strip:12</id> - </readout>
</readouts> <fields>
Use REPLY-ALL to reply to list
To unsubscribe from the LCD-CVS list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=LCD-CVS&A=1