hps-detectors/detectors/HPS-TestRun-v2
diff -u -r1.8 -r1.9
--- compact.xml 29 May 2012 21:39:19 -0000 1.8
+++ compact.xml 4 Jun 2012 23:36:57 -0000 1.9
@@ -3,31 +3,38 @@
xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd">
<info name="HPS-TestRun-v2">
- <comment>HPS Test Proposal detector explicit SVT module placements</comment>
+ <comment>HPS JLab Test Run detector</comment>
</info>
<define>
+
<!-- world -->
<constant name="world_side" value="500.0*cm" />
<constant name="world_x" value="world_side" />
<constant name="world_y" value="world_side" />
<constant name="world_z" value="world_side" />
+
<!-- tracking region -->
<constant name="tracking_region_radius" value="200.0*cm"/>
<constant name="tracking_region_min" value="5.0*cm"/>
<constant name="tracking_region_zmax" value="100.0*cm"/>
+
+ <!-- ECAL -->
+ <constant name="ecal_front" value="13.3/2*mm" />
+ <constant name="ecal_back" value="16/2*mm" />
+ <constant name="ecal_z" value="160/2*mm" />
+ <constant name="ecal_dx" value="41.27*mm" />
+
<!-- SVT module dimensions -->
<constant name="moduleLength" value="100.0"/>
<constant name="moduleWidth" value="40.34"/>
+
<!-- SVT sensor dimensions -->
<constant name="sensorLength" value="98.33"/>
+
<!-- Sensor width slightly less than 38.34 mm so sisim works. -->
<constant name="sensorWidth" value="38.3399"/>
- <!-- ECAL -->
- <constant name="ecal_front" value="13.3/2*mm" />
- <constant name="ecal_back" value="16/2*mm" />
- <constant name="ecal_z" value="160/2*mm" />
-
+
<!-- positions derived from drawing assuming 1.35/1.2 degress open on top/bottom -->
<constant name="x_rot_top" value="-0.0235619449" />
<constant name="x_rot_bot" value="0.020943951" />
@@ -202,23 +209,13 @@
<comment>The crystal ECal</comment>
<material name="LeadTungstate" />
<dimensions x1="ecal_front" y1="ecal_front" x2="ecal_back" y2="ecal_back" z="ecal_z" />
- <!-- <layout beamgap="20.0*mm" nx="46" ny="5" dface="137.0*cm">-->
- <!-- Measurements as found in installation by Stepan -->
+ <!-- Measurements as found in installation by Stepan -->
<layout beamgap="37.0*mm" nx="46" ny="5" dface="152.4*cm">
<remove ixmin="-10" ixmax="-2" iymin="-1" iymax="1" />
+ <top dx="ecal_dx" dy="0." dz="0."/>
+ <bottom dx="ecal_dx" dy="0." dz="0."/>
</layout>
</detector>
-<!-- <detector id="10" name="Target" type="SiTrackerSpectrometer" readout="TargetHits" reflect="false">
- <comment>The Tungsten fixed target</comment>
- <module name="TungstenTarget">
- <trd x1="5*cm" x2="5*cm" z="5*cm" />
- <module_component thickness="0.3504*cm*0.00125" material="Tungsten" sensitive="false"/>
- </module>
- <layer id="1">
- <quadrant xStart="0" nx="1" xStep="moduleLength" yStart="0" ny="1" yStep="moduleWidth" phi0="0.0" z="0.0" dz="0.0*cm" module="TungstenTarget"/>
- </layer>
- </detector>-->
-
</detectors>
<readouts>
@@ -229,9 +226,6 @@
<segmentation type="GridXYZ" gridSizeX="0.0" gridSizeY="0.0" gridSizeZ="0.0" />
<id>system:6,layer:2,ix:-8,iy:-6</id>
</readout>
- <readout name="TargetHits">
- <id>system:6,barrel:3,layer:4,wedge:4,module:12,sensor:1,side:32:-2,strip:12</id>
- </readout>
</readouts>
<fields>