 |
 |
Can you look at the log: /home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.msg and post relevant section? Most likely you are missing a dependency (we DID get it to work on ubuntu 12.04 in the past, so this should be easily solvable.). Most likely it is a missing dependency, packages listed in qserv-install-deps-ubuntu-14.04.sh are similar to what is needed on 12.04, so you might peak there and see if you have these packages installed. Jacek On 08/01/2014 01:27 PM, Vaikunth Thukral wrote: > Hi, > > I've read through some of the documentation and was working on > installing qserv. As Kian-Tat mentioned, I used the @git* instead of > @dev* repo and followed through the README instructions. I got stuck > during the "eups distrib install qserv" step [1] (wall of text with > error included below signature). > > In full disclosure I attempted this installation on Ubuntu 12.04 LTS and > the dependency installation folder only had the following options for > Ubuntu: > qserv-install-deps-ubuntu-13.10.sh > <http://qserv-install-deps-ubuntu-13.10.sh> > qserv-install-deps-ubuntu-14.04.sh > <http://qserv-install-deps-ubuntu-14.04.sh> > > I'm not certain if this is a dependency issue and I ran both of them, > but though I'd mention it anyway. Any clues as to what the issue could > be? Everything before this ran without any errors. > > Thanks, > -Vaikunth > > [1] > ################################################################################ > > |eups distrib install qserv -rhttp://lsst-web.ncsa.illinois.edu/~fjammes/qserv| > > [ 1/27 ] antlr 2.7.7 > done. > [ 2/27 ] doxygen 1.8.2+2 (already installed) > done. > [ 3/27 ] expat 2.0.1 > done. > [ 4/27 ] libevent 2.0.16-stable > done. > [ 5/27 ] lua 5.1.4 > done. > [ 6/27 ] mysql 5.1.65 > done. > [ 7/27 ] mysqlclient 5.1.65+3 > done. > [ 8/27 ] python master-gcbf93ab65b ... > Using externally provided Python 2.7.5 :: Anaconda 1.8.0 > (64-bit). > [ 8/27 ] python master-gcbf93ab65b > done. > [ 9/27 ] swig 2.0.12 > done. > [ 10/27 ] xrootd 3.2.8-qsPatch5 > done. > [ 11/27 ] zookeeper 3.4.6 > done. > [ 12/27 ] boost 1.55.0.1+1 ... > > ***** error: from > /home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.log: > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/token_ids.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/wave_config_constant.o > common.mkdir > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer > ...on 1100th target... > common.mkdir > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex/aq.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_defined_grammar.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_re2c_lexer.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_re2c_lexer_str.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_predef_macros.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_grammar.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_literalgrs.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_exprgrammar.o > gcc.compile.c++ > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex/cpp_re.o > gcc.archive > bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/libboost_wave.a > common.copy stage/lib/libboost_wave.a > ...failed updating 2 targets... > ...skipped 6 targets... > ...updated 1103 targets... > + exit -4 > eups distrib: Failed to build boost-1.55.0.1+1.eupspkg: Command: > source /home/vaikunth/QSERV/eups/bin/setups.sh; export > EUPS_PATH=/home/vaikunth/QSERV; > (/home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.sh) >> > /home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.log > 2>&1 4>/home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.msg > exited with code 252 > > ########################################################################################### > > > On Fri, Jul 25, 2014 at 2:10 PM, Jacek Becla <[log in to unmask] > <mailto:[log in to unmask]>> wrote: > > K-T > > Right! I'll update the trac page (I just copied & pasted > from there, I didn't notice it got outdated). > > Thanks, > Jacek > > > > > On 07/25/2014 11:21 AM, Kian-Tat Lim wrote: > > Jacek and others, > > Please don't use dev.lsstcorp.org > <http://dev.lsstcorp.org> for git. This is outdated and > deprecated and will stop working in the future. > > I think the readme* is not completely clear about how to > checkout qserv, (we will fix it). It is basically > > git repo cloning (for LSST DM users) > git clone git://dev.lsstcorp.org/LSST/__DMS/qserv > <http://dev.lsstcorp.org/LSST/DMS/qserv> > > > The preferred URL for developers with commit access (those who have > submitted public keys) is [log in to unmask]:LSST/DMS/__qserv > > git repo cloning (for external users; anonymous, read-only) > git clone http://dev.lsstcorp.org/git/__LSST/DMS/qserv > <http://dev.lsstcorp.org/git/LSST/DMS/qserv> > > > Here, it's http://git.lsstcorp.org/LSST/__DMS/qserv > <http://git.lsstcorp.org/LSST/DMS/qserv> > > > ##############################__##############################__############ > Use REPLY-ALL to reply to list > > To unsubscribe from the QSERV-L list, click the following link: > https://listserv.slac.__stanford.edu/cgi-bin/wa?__SUBED1=QSERV-L&A=1 > <https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=QSERV-L&A=1> > > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the QSERV-L list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=QSERV-L&A=1