 |
 |
Hi, this is just to say that next week I'll be at JLab, and I can help in doing LED characterization. Is there any update on the FADC running in integral mode? Andrea Il 11/26/2014 08:11 AM, McCormick, Jeremy I. ha scritto: > > Hi, > > > When the DAQ is operational again, would it be possible to get an ECAL > run where you flash the LEDs for every crystal in order from "upper > left" (in event display) across the entire row, then down to the next > column and across, etc. (Or in some specified order that makes sense.) > > > This would be very helpful for testing purposes. > > > I don't know what you would need to do as far as the triggering to > make separate EvioEvents out of this information, but ideally I would > think 1 hit / event would make the most sense. > > > This would let me test, for instance, the EcalChannel mapping in the > conditions database and the event display, amongst other things. > > > It would also provide a good set of raw events with signal well above > pedestal + 3 * sigma (I'm assuming? I don't know what signal strength > you get from the LEDs). > > > Anyways, just a thought I had. Perhaps you've done some LED runs > already that might be useful? > > > --Jeremy > > > ------------------------------------------------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1