 |
 |
Yes, I could see this message too. Le 2014-11-06 11:25, Andrea Celentano a écrit : > Hi, > I runned this test, and I got errors like: > > created LCSim event #53 > Crate 1, slot 20, channel 13 not found in map > Crate 1, slot 20, channel 14 not found in map > Crate 2, slot 20, channel 13 not found in map > Crate 2, slot 20, channel 14 not found in map > Crate 2, slot 20, channel 15 not found in map > > Did this happen also to you? > > I know what is going on here: > - These DAQ channels are connected to trigger PMTS in the ECAL, and > they're not define in the ECAL daq map (since they do not match any > ecal channel) > - In the past, I tried to find a hack for this, by defining in the daq > map a correspondence between these DAQ channels and some non-existing > crystals (for example, using ix=0) > - This still does not work, because, when creating the lcio event, > there's correspondence between these "fake crystals" and the > detector-related information > --> One would have also to "hack" the detector description and add > these "fake crystals". However, I do not know if this is a good idea. > > What I did in the commissioning branch was to modify the > EcalEvioReader class, skipping the data for these DAQ channels > (methods makeIntegralHits / makePulseHits). > I see that this modification was not moved to the trunk: this is > probably ok, since the solution I found was only a temporary > work-around. > > Best, > Andrea > > Il 11/06/2014 12:47 AM, McCormick, Jeremy I. ha scritto: >> Hi, >> >> Today I was able to generate LCIO data from the current ECAL EVIO >> output, using the HPS Java trunk distribution jar. (Thanks mostly to >> updates from Sho for Engineering Run compatibility.) >> >> Basically, this just includes the RawCalorimeterHit collections with >> the IDs and ADC values. >> >> You can test this by running: >> >> cd trunk/evio; mvn test -Dtest=LCSimEngRunEventBuilderTest >> >> It will generate an LCIO file with a few events in it at: >> >> target/test-output/LCSimEngRunEventBuilderTest/LCSimEngRunEventBuilderTest_output.slcio >> >> Right now I am using mostly “dummy” db conditions to get this working. >> I know that the pedestal/noise values definitely need to be updated >> in the database. Gains are all set to 1 for now. >> >> Any comment/questions on the output can go here: >> >> https://jira.slac.stanford.edu/browse/HPSJAVA-275 >> >> Next I’m going to try and get the new event builder working in the >> monitoring application... >> >> —Jeremy > > ######################################################################## > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 -- Gabriel CHARLES Institut de Physique Nucléaire d'Orsay ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1