 |
 |
Looking at hps_003001_mode7.evio.0. I see the mode 7 format, and I see: * the format tag is 0xe102 * the format string is "c,i,l,N(c,N(s,i,s,s))" so the format tag is the same as the old pulse format, but the actual format is different. That's why the EVIO-LCIO conversion isn't working. This will not work until somebody writes the code to do the conversion - this is Jira item #349, I guess, assigned to Andrea. On Mon, 8 Dec 2014, Kyle McCarty wrote: > Hello Sho, > > That's the newest that we have. The file name should indicate the ones that > were run in mode 7 (the mode we are supposedly using). We aren't able to > get new data at the moment, unfortunately. > > I made the change that you suggested and tried running the monitoring > application on an older EVIO file (the DAQ is down at the moment; I'll test > it on the ET ring once i comes up again) and got a different error: > > java.lang.NullPointerException >> at >> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:92) >> at >> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832) >> at >> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668) >> at >> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566) >> at org.hps.record.composite.CompositeLoop.loop(CompositeLoop.java:211) >> at >> org.hps.record.composite.EventProcessingThread.run(EventProcessingThread.java:48) >> org.hps.record.RecordProcessingException: No next EVIO record available >> from source. >> at >> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:103) >> at >> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832) >> at >> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668) >> at >> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566) >> at org.hps.record.composite.CompositeLoop.loop(CompositeLoop.java:211) >> at >> org.hps.record.composite.EventProcessingThread.run(EventProcessingThread.java:48) >> Caused by: org.freehep.record.source.NoSuchRecordException >> at org.hps.record.evio.EvioFileSource.next(EvioFileSource.java:109) >> at >> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:68) >> ... 5 more >> org.hps.record.composite.CompositeLoopAdapter.finish >> > > I'm not sure if this helps or not. > > Also, it is possible something with the SSP has changed, though I'm not > sure if that would cause this specific error. > > Thanks, > > Kyle > > On Mon, Dec 8, 2014 at 10:21 PM, Sho Uemura <[log in to unmask]> wrote: > >> I need a file with pulse mode readout, since that's what the error is >> coming from. >> >> (If you're not running pulse mode, and the reader is misidentifying the >> readout mode, that's obviously also a big problem.) >> >> I don't see anything newer than Dec. 4 in /volatile/hallb/hps/led/; do you >> mean some other directory? >> >> >> On Mon, 8 Dec 2014, Kyle McCarty wrote: >> >> Hello Sho, >>> >>> I'll give that a try in a moment. >>> >>> For data, we don't have anything since the error started. Do you think it >>> is related to data format? If not, we have some data from earlier today at >>> the LED sub-directory that you can try. >>> >>> Thanks, >>> >>> Kyle >>> That points to an EVIO error - either a bug in the reader (you're >>> exercising the pulse mode code, and we never ran pulse mode in the test >>> run), or something unexpected in the data format. >>> >>> In either case, I can probably fix it if I have a file to look at. I don't >>> find any data from this week in /volatile or on tape, but can you tell me >>> where to look? >>> >>> On Mon, 8 Dec 2014, Kyle McCarty wrote: >>> >>> Hello hps-software, >>> >>>> >>>> Using the most recent build of hps-java, we obtain the following error >>>> during event processing on the monitoring application in the counting >>>> house: >>>> >>>> SEVERE: Error making ECal hits >>>> >>>> java.lang.NullPointerException >>>>> at org.hps.evio.ECalEvioReader.makePulseHits(ECalEvioReader. >>>>> java:259) >>>>> at org.hps.evio.ECalEvioReader.makeHits(ECalEvioReader.java:129) >>>>> at >>>>> org.hps.evio.LCSimEngRunEventBuilder.makeLCSimEvent( >>>>> LCSimEngRunEventBuilder.java:47) >>>>> at >>>>> org.hps.record.composite.LcioEventAdapter.recordSupplied( >>>>> LcioEventAdapter.java:82) >>>>> at >>>>> org.freehep.record.loop.DefaultRecordLoop.consumeRecord( >>>>> DefaultRecordLoop.java:832) >>>>> at >>>>> org.freehep.record.loop.DefaultRecordLoop.loop( >>>>> DefaultRecordLoop.java:668) >>>>> at >>>>> org.freehep.record.loop.DefaultRecordLoop.execute( >>>>> DefaultRecordLoop.java:566) >>>>> at org.hps.record.composite.CompositeLoop.loop( >>>>> CompositeLoop.java:211) >>>>> at >>>>> org.hps.record.composite.EventProcessingThread.run( >>>>> EventProcessingThread.java:48) >>>>> >>>>> >>>>> It seems to be keeping us from seeing events in some of the GUIs. Any >>>> ideas >>>> what the problem is? >>>> >>>> Thanks, >>>> >>>> Kyle >>>> >>>> ######################################################################## >>>> Use REPLY-ALL to reply to list >>>> >>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>> >>>> >>>> >>> ######################################################################## >>> Use REPLY-ALL to reply to list >>> >>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>> >>> >> ######################################################################## >> Use REPLY-ALL to reply to list >> >> To unsubscribe from the HPS-SOFTWARE list, click the following link: >> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >> > > ######################################################################## > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1