 |
 |
Hello Sho, Kyle, If the format string is different from the actual contents of the bank, that that would be a bug in how the DAQ writes out the data. We should contact Sergey to have that fixed on the DAQ side as well. - Maurik On Dec 8, 2014, at 11:19 PM, Sho Uemura <[log in to unmask]> wrote: > Looking at hps_003001_mode7.evio.0. I see the mode 7 format, and I see: > > * the format tag is 0xe102 > > * the format string is "c,i,l,N(c,N(s,i,s,s))" > > so the format tag is the same as the old pulse format, but the actual format is different. That's why the EVIO-LCIO conversion isn't working. This will not work until somebody writes the code to do the conversion - this is Jira item #349, I guess, assigned to Andrea. > > On Mon, 8 Dec 2014, Kyle McCarty wrote: > >> Hello Sho, >> >> That's the newest that we have. The file name should indicate the ones that >> were run in mode 7 (the mode we are supposedly using). We aren't able to >> get new data at the moment, unfortunately. >> >> I made the change that you suggested and tried running the monitoring >> application on an older EVIO file (the DAQ is down at the moment; I'll test >> it on the ET ring once i comes up again) and got a different error: >> >> java.lang.NullPointerException >>> at >>> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:92) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566) >>> at org.hps.record.composite.CompositeLoop.loop(CompositeLoop.java:211) >>> at >>> org.hps.record.composite.EventProcessingThread.run(EventProcessingThread.java:48) >>> org.hps.record.RecordProcessingException: No next EVIO record available >>> from source. >>> at >>> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:103) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.consumeRecord(DefaultRecordLoop.java:832) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.loop(DefaultRecordLoop.java:668) >>> at >>> org.freehep.record.loop.DefaultRecordLoop.execute(DefaultRecordLoop.java:566) >>> at org.hps.record.composite.CompositeLoop.loop(CompositeLoop.java:211) >>> at >>> org.hps.record.composite.EventProcessingThread.run(EventProcessingThread.java:48) >>> Caused by: org.freehep.record.source.NoSuchRecordException >>> at org.hps.record.evio.EvioFileSource.next(EvioFileSource.java:109) >>> at >>> org.hps.record.composite.EvioEventAdapter.recordSupplied(EvioEventAdapter.java:68) >>> ... 5 more >>> org.hps.record.composite.CompositeLoopAdapter.finish >>> >> >> I'm not sure if this helps or not. >> >> Also, it is possible something with the SSP has changed, though I'm not >> sure if that would cause this specific error. >> >> Thanks, >> >> Kyle >> >> On Mon, Dec 8, 2014 at 10:21 PM, Sho Uemura <[log in to unmask]> wrote: >> >>> I need a file with pulse mode readout, since that's what the error is >>> coming from. >>> >>> (If you're not running pulse mode, and the reader is misidentifying the >>> readout mode, that's obviously also a big problem.) >>> >>> I don't see anything newer than Dec. 4 in /volatile/hallb/hps/led/; do you >>> mean some other directory? >>> >>> >>> On Mon, 8 Dec 2014, Kyle McCarty wrote: >>> >>> Hello Sho, >>>> >>>> I'll give that a try in a moment. >>>> >>>> For data, we don't have anything since the error started. Do you think it >>>> is related to data format? If not, we have some data from earlier today at >>>> the LED sub-directory that you can try. >>>> >>>> Thanks, >>>> >>>> Kyle >>>> That points to an EVIO error - either a bug in the reader (you're >>>> exercising the pulse mode code, and we never ran pulse mode in the test >>>> run), or something unexpected in the data format. >>>> >>>> In either case, I can probably fix it if I have a file to look at. I don't >>>> find any data from this week in /volatile or on tape, but can you tell me >>>> where to look? >>>> >>>> On Mon, 8 Dec 2014, Kyle McCarty wrote: >>>> >>>> Hello hps-software, >>>> >>>>> >>>>> Using the most recent build of hps-java, we obtain the following error >>>>> during event processing on the monitoring application in the counting >>>>> house: >>>>> >>>>> SEVERE: Error making ECal hits >>>>> >>>>> java.lang.NullPointerException >>>>>> at org.hps.evio.ECalEvioReader.makePulseHits(ECalEvioReader. >>>>>> java:259) >>>>>> at org.hps.evio.ECalEvioReader.makeHits(ECalEvioReader.java:129) >>>>>> at >>>>>> org.hps.evio.LCSimEngRunEventBuilder.makeLCSimEvent( >>>>>> LCSimEngRunEventBuilder.java:47) >>>>>> at >>>>>> org.hps.record.composite.LcioEventAdapter.recordSupplied( >>>>>> LcioEventAdapter.java:82) >>>>>> at >>>>>> org.freehep.record.loop.DefaultRecordLoop.consumeRecord( >>>>>> DefaultRecordLoop.java:832) >>>>>> at >>>>>> org.freehep.record.loop.DefaultRecordLoop.loop( >>>>>> DefaultRecordLoop.java:668) >>>>>> at >>>>>> org.freehep.record.loop.DefaultRecordLoop.execute( >>>>>> DefaultRecordLoop.java:566) >>>>>> at org.hps.record.composite.CompositeLoop.loop( >>>>>> CompositeLoop.java:211) >>>>>> at >>>>>> org.hps.record.composite.EventProcessingThread.run( >>>>>> EventProcessingThread.java:48) >>>>>> >>>>>> >>>>>> It seems to be keeping us from seeing events in some of the GUIs. Any >>>>> ideas >>>>> what the problem is? >>>>> >>>>> Thanks, >>>>> >>>>> Kyle >>>>> >>>>> ######################################################################## >>>>> Use REPLY-ALL to reply to list >>>>> >>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>>> >>>>> >>>>> >>>> ######################################################################## >>>> Use REPLY-ALL to reply to list >>>> >>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>> >>>> >>> ######################################################################## >>> Use REPLY-ALL to reply to list >>> >>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>> >> >> ######################################################################## >> Use REPLY-ALL to reply to list >> >> To unsubscribe from the HPS-SOFTWARE list, click the following link: >> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >> > > ######################################################################## > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1