 |
 |
hi, you can find the ap2* slcio it here: /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio can you try to see if you can read it properly? (and there's something in?) thanks! On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote: > Hi, > > can you point us to the slcio file? > > On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]> wrote: > >> Hi all, >> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going. >> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file. >> Then, I try to produce a readout file, using the instructions in the >> confluence "Running Readout Simulation" page (lcsim and hps_trunk >> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess), >> and nothing else: the reconstruction ends with Ecal/svt setup info >> >> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal >> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map >> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries >> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector >> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker >> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors >> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries >> End of file reached >> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed >> >> and the readout file is empty. >> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get >> >> Executed dry run. No events processed! >> >> and again nothing else is done. What am I doing wrong? >> Thanks, cheers >> Alessandra >> >> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail. >> >> ######################################################################## >> Use REPLY-ALL to reply to list >> >> To unsubscribe from the HPS-SOFTWARE list, click the following link: >> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > ######################################################################## > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1