Hi Pelle,
no, not yet, I am stuck...
I have the same problem (and same behaviour) if I try to run the
reconstruction at slac, so I doubt it could be an issue related to the
connection to the database.
Cheers
Alessandra
On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote:
> Alessandra, did you solve your problem? I think Jeremy added a fix for this?
>
> On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>
>>
>> Actually, I can’t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they’ve always been jealous of us..I can’t get to the svn repository either. Here’s the log file for those interested:
>> <foobar>
>>
>>
>>
>> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>>
>>> So there are definitely TrackerHits in your slcio file…it looks fine to me. I’ll try running some readout.
>>>
>>>
>>> On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>>
>>>> hi,
>>>> you can find the ap2* slcio it here:
>>>>
>>>> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
>>>>
>>>> can you try to see if you can read it properly? (and there's something in?)
>>>> thanks!
>>>>
>>>>
>>>>
>>>> On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> can you point us to the slcio file?
>>>>>
>>>>> On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>>>>
>>>>>> Hi all,
>>>>>> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going.
>>>>>> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file.
>>>>>> Then, I try to produce a readout file, using the instructions in the
>>>>>> confluence "Running Readout Simulation" page (lcsim and hps_trunk
>>>>>> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess),
>>>>>> and nothing else: the reconstruction ends with Ecal/svt setup info
>>>>>>
>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal
>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map
>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries
>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector
>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker
>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors
>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries
>>>>>> End of file reached
>>>>>> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed
>>>>>>
>>>>>> and the readout file is empty.
>>>>>> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get
>>>>>>
>>>>>> Executed dry run. No events processed!
>>>>>>
>>>>>> and again nothing else is done. What am I doing wrong?
>>>>>> Thanks, cheers
>>>>>> Alessandra
>>>>>>
>>>>>> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail.
>>>>>>
>>>>>> ########################################################################
>>>>>> Use REPLY-ALL to reply to list
>>>>>>
>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>
>>>>> ########################################################################
>>>>> Use REPLY-ALL to reply to list
>>>>>
>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>>
>>>>
>>>> ########################################################################
>>>> Use REPLY-ALL to reply to list
>>>>
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>
>>> ########################################################################
>>> Use REPLY-ALL to reply to list
>>>
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
