 |
 |
good... at least I am not alone ;-) thanks for any hints you might have. It seems it goes for a dry run by default - maybe there are some more new parameters to pass? number of events to be processed? something trivial like this? On Mon, 26 Jan 2015, Graham, Mathew Thomas wrote: > > Yeah, I can finally verify I get the same thing. I can browse through events (w/o > running a driver) no problem, but when I run (via command > line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and > endOfData without going through events. > > [IMAGE] > > On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]> wrote: > > > Hi, > > sorry for not being able to help much here (trying to get the SVT in shape > for shipping). I will try to run again as well sometime today; it was > working last week so it’ll be interesting to see. > > /Pelle > > > On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]> wrote: > > Hi Pelle, > no, not yet, I am stuck... > I have the same problem (and same behaviour) if I try to run the > reconstruction at slac, so I doubt it could be an issue related > to the connection to the database. > Cheers > Alessandra > > > > > On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote: > > Alessandra, did you solve your problem? I think > Jeremy added a fix for this? > > On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas > <[log in to unmask]> wrote: > > > Actually, I can’t seem to connect to the > DB at all from where I am (Fermilab). I > think FNAL has SLAC cut off, somehow; > they’ve always been jealous of us..I > can’t get to the svn repository either. > Here’s the log file for those > interested: > <foobar> > > > > On Jan 21, 2015, at 10:38 PM, Graham, > Mathew Thomas > <[log in to unmask]> wrote: > > So there are definitely > TrackerHits in your slcio > file…it looks fine to me. > I’ll try running some > readout. > > > On Jan 21, 2015, at 10:23 > AM, Alessandra Filippi > <[log in to unmask]> wrote: > > hi, > you can find the > ap2* slcio it > here: > > /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio > > can you try to > see if you can > read it > properly? (and > there's > something in?) > thanks! > > > > On Wed, 21 Jan > 2015, Hansson > Adrian, Per Ola > wrote: > > Hi, > > can > you > point > us > to > the > slcio > file? > > On > Jan > 21, > 2015, > at > 7:30 > AM, > Alessandra > Filippi > <[log in to unmask]> > wrote: > > Hi > all, > sorry > for > the > stupid > question, > but > I > am > not > able > to > get > any > result > in > running > readout > simulations, > whichever > steering > lcsim > file > I > use, > and > I > need > some > help > to > get > going. > I > produced > a > .slcio > file > with > slic > on > two > kinds > of > stdhep > files > (ap2.2gev075mev* > and > Takashi's > new > brems-mad1.92gev*), > using > the > slic > installation > at > slac > (old, > but > working > - > I > think). > I > am > using > the > HPSTestRunTracker2014-v0.lcdd > geometry > file. > Then, > I > try > to > produce > a > readout > file, > using > the > instructions > in > the > confluence > "Running > Readout > Simulation" > page > (lcsim > and > hps_trunk > freshly > updated). > All > I > get, > with > both > the > .slcio > files > and > whichever > HPS2014Readout*.lcsim > file, > is > the > geometry > survey > of > SVT > (I > guess), > and > nothing > else: > the > reconstruction > ends > with > Ecal/svt > setup > info > > Wed > Jan > 21 > 16:19:15 > CET > 2015 > :: > EcalDetectorSetup > :: > INFO > :: > loading > ECAL > conditions > onto > subdetector > Ecal > Wed > Jan > 21 > 16:19:15 > CET > 2015 > :: > EcalDetectorSetup > :: > INFO > :: > building > ECAL > geometry > channel > map > Wed > Jan > 21 > 16:19:15 > CET > 2015 > :: > EcalDetectorSetup > :: > INFO > :: > built > ECAL > geometry > channel > with > 442 > entries > Wed > Jan > 21 > 16:19:15 > CET > 2015 > :: > EcalDetectorSetup > :: > INFO > :: > done > loading > ECAL > conditions > onto > subdetector > Wed > Jan > 21 > 16:19:26 > CET > 2015 > :: > SvtDetectorSetup > :: > INFO > :: > loading > SVT > conditions > onto > subdetector > Tracker > Wed > Jan > 21 > 16:19:26 > CET > 2015 > :: > SvtDetectorSetup > :: > INFO > :: > setting > up > 20 > SVT > sensors > Wed > Jan > 21 > 16:19:26 > CET > 2015 > :: > SvtDetectorSetup > :: > INFO > :: > channel > map > has > 23040 > entries > End > of > file > reached > Wed > Jan > 21 > 16:19:26 > CET > 2015 > :: > DatabaseConditionsManager > :: > INFO > :: > connection > closed > > and > the > readout > file > is > empty. > If > I > use > HPSTrackingDefaults.lcsim, > again > on > whichever > kind > of > slcio > file, > after > the > drivers > being > loaded, > I > get > > Executed > dry > run. > No > events > processed! > > and > again > nothing > else > is > done. > What > am > I > doing > wrong? > Thanks, > cheers > Alessandra > > ps. > I > wanted > to > inspect > the > slcio > files > to > see > whether > they > had > problems, > but > I > cannot > install > JAS3 > for > the > issue > mentioned > in > my > previous > e-mail. > > ######################################################################## > Use > REPLY-ALL > to > reply > to > list > > To > unsubscribe > from > the > HPS-SOFTWARE > list, > click > the > following > link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > > ######################################################################## > Use > REPLY-ALL > to > reply > to > list > > To > unsubscribe > from > the > HPS-SOFTWARE > list, > click > the > following > link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > > ######################################################################## > Use REPLY-ALL to > reply to list > > To unsubscribe > from the > HPS-SOFTWARE > list, click the > following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > > ######################################################################## > Use REPLY-ALL to reply to > list > > To unsubscribe from the > HPS-SOFTWARE list, click the > following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > > > > > > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1