On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <<a href="/cgi-bin/wa?LOGON=A3%3Dind1501%26L%3DHPS-SOFTWARE%26E%3Dbase64%26P%3D1283758%26B%3D--_003_8A1886EB34D24A83B24E8537F5D3EC53slacstanfordedu_%26T%3Dtext%252Fplain%3B%2520name%3D%2522ATT00001.txt%2522%26N%3DATT00001.txt%26attachment%3Dq" target="_parent" >[log in to unmask]</a>> wrote:

> So there are definitely TrackerHits in your slcio file…it looks fine to me.  I’ll try running some readout.  
> 
> 
> On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <<a href="/cgi-bin/wa?LOGON=A3%3Dind1501%26L%3DHPS-SOFTWARE%26E%3Dbase64%26P%3D1283758%26B%3D--_003_8A1886EB34D24A83B24E8537F5D3EC53slacstanfordedu_%26T%3Dtext%252Fplain%3B%2520name%3D%2522ATT00001.txt%2522%26N%3DATT00001.txt%26attachment%3Dq" target="_parent" >[log in to unmask]</a>> wrote:
> 
>> hi,
>> you can find the ap2* slcio it here:
>> 
>> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
>> 
>> can you try to see if you can read it properly? (and there's something in?)
>> thanks!
>> 
>> 
>> 
>> On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote:
>> 
>>> Hi,
>>> 
>>> can you point us to the slcio file?
>>> 
>>> On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <<a href="/cgi-bin/wa?LOGON=A3%3Dind1501%26L%3DHPS-SOFTWARE%26E%3Dbase64%26P%3D1283758%26B%3D--_003_8A1886EB34D24A83B24E8537F5D3EC53slacstanfordedu_%26T%3Dtext%252Fplain%3B%2520name%3D%2522ATT00001.txt%2522%26N%3DATT00001.txt%26attachment%3Dq" target="_parent" >[log in to unmask]</a>> wrote:
>>> 
>>>> Hi all,
>>>> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going.
>>>> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file.
>>>> Then, I try to produce a readout file, using the instructions in the
>>>> confluence "Running Readout Simulation" page (lcsim and hps_trunk
>>>> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess),
>>>> and nothing else: the reconstruction ends with Ecal/svt setup info
>>>> 
>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal
>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map
>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries
>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector
>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker
>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors
>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries
>>>> End of file reached
>>>> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed
>>>> 
>>>> and the readout file is empty.
>>>> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get
>>>> 
>>>> Executed dry run.  No events processed!
>>>> 
>>>> and again nothing else is done. What am I doing wrong?
>>>> Thanks, cheers
>>>>  Alessandra
>>>> 
>>>> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail.
>>>> 
>>>> ########################################################################
>>>> Use REPLY-ALL to reply to list
>>>> 
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>> 
>>> ########################################################################
>>> Use REPLY-ALL to reply to list
>>> 
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>> 
>> 
>> ########################################################################
>> Use REPLY-ALL to reply to list
>> 
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
> 
> ########################################################################
> Use REPLY-ALL to reply to list
> 
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1


########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1