I agree…the database issue was my own personal problem. > Hi Pelle, > no, not yet, I am stuck... > I have the same problem (and same behaviour) if I try to run the reconstruction at slac, so I doubt it could be an issue related to the connection to the database. > Cheers > Alessandra > > > > > On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote: > >> Alessandra, did you solve your problem? I think Jeremy added a fix for this? >> >> On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]> wrote: >> >>> >>> Actually, I can’t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they’ve always been jealous of us..I can’t get to the svn repository either. Here’s the log file for those interested: >>> <foobar> >>> >>> >>> >>> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]> wrote: >>> >>>> So there are definitely TrackerHits in your slcio file…it looks fine to me. I’ll try running some readout. >>>> >>>> >>>> On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]> wrote: >>>> >>>>> hi, >>>>> you can find the ap2* slcio it here: >>>>> >>>>> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio >>>>> >>>>> can you try to see if you can read it properly? (and there's something in?) >>>>> thanks! >>>>> >>>>> >>>>> >>>>> On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> can you point us to the slcio file? >>>>>> >>>>>> On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]> wrote: >>>>>> >>>>>>> Hi all, >>>>>>> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going. >>>>>>> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file. >>>>>>> Then, I try to produce a readout file, using the instructions in the >>>>>>> confluence "Running Readout Simulation" page (lcsim and hps_trunk >>>>>>> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess), >>>>>>> and nothing else: the reconstruction ends with Ecal/svt setup info >>>>>>> >>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal >>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map >>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries >>>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector >>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker >>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors >>>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries >>>>>>> End of file reached >>>>>>> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed >>>>>>> >>>>>>> and the readout file is empty. >>>>>>> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get >>>>>>> >>>>>>> Executed dry run. No events processed! >>>>>>> >>>>>>> and again nothing else is done. What am I doing wrong? >>>>>>> Thanks, cheers >>>>>>> Alessandra >>>>>>> >>>>>>> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail. >>>>>>> >>>>>>> ######################################################################## >>>>>>> Use REPLY-ALL to reply to list >>>>>>> >>>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>>>> >>>>>> ######################################################################## >>>>>> Use REPLY-ALL to reply to list >>>>>> >>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>>>> >>>>> >>>>> ######################################################################## >>>>> Use REPLY-ALL to reply to list >>>>> >>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>> >>>> ######################################################################## >>>> Use REPLY-ALL to reply to list >>>> >>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>> >> ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1