Hi Matt, can you run with the simplified tracker digitization (SimpleTrackerDigiDriver)? Something like this: <driver name="TrackerDigiDriver" type="org.hps.recon.tracking.SimpleTrackerDigiDriver"> <!-- <dropBadChannels>true</dropBadChannels>--> <debug>false</debug> </driver> On Jan 26, 2015, at 9:58 AM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: Yeah, I can finally verify I get the same thing. I can browse through events (w/o running a driver) no problem, but when I run (via command line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and endOfData without going through events. <PastedGraphic-1.png> On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi, sorry for not being able to help much here (trying to get the SVT in shape for shipping). I will try to run again as well sometime today; it was working last week so it’ll be interesting to see. /Pelle On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi Pelle, no, not yet, I am stuck... I have the same problem (and same behaviour) if I try to run the reconstruction at slac, so I doubt it could be an issue related to the connection to the database. Cheers Alessandra On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote: Alessandra, did you solve your problem? I think Jeremy added a fix for this? On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: Actually, I can’t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they’ve always been jealous of us..I can’t get to the svn repository either. Here’s the log file for those interested: <foobar> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: So there are definitely TrackerHits in your slcio file…it looks fine to me. I’ll try running some readout. On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: hi, you can find the ap2* slcio it here: /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio can you try to see if you can read it properly? (and there's something in?) thanks! On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote: Hi, can you point us to the slcio file? On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi all, sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going. I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file. Then, I try to produce a readout file, using the instructions in the confluence "Running Readout Simulation" page (lcsim and hps_trunk freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess), and nothing else: the reconstruction ends with Ecal/svt setup info Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries End of file reached Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed and the readout file is empty. If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get Executed dry run. No events processed! and again nothing else is done. What am I doing wrong? Thanks, cheers Alessandra ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail. ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1