Print

Print


It works fine for me. It feels like it should be the other way, but I guess I should figure out why it works :)

[cid:[log in to unmask]]


On Jan 26, 2015, at 10:30 AM, Sho Uemura <[log in to unmask]<mailto:[log in to unmask]>> wrote:

Never mind, I don't think that's right. There's nothing wrong with that config. I'll look at this during lunch.

On Mon, 26 Jan 2015, Sho Uemura wrote:

You;re right.

The clusterer settings are not correct:

<inputHitCollectionName>EcalReadoutAnalogHits</inputHitCollectionName>

should be

<inputHitCollectionName>EcalReadoutHits</inputHitCollectionName>

I can't make or test the change on my computer here, but maybe someone else can.

On Mon, 26 Jan 2015, Hansson Adrian, Per Ola wrote:

Can this be related to changes on the ECal side? Maybe collection names has been changing? What happens if a collection is not found, maybe it skips the event?
On Jan 26, 2015, at 10:08 AM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote:
I?m using this to run:
===============================================
$steering="resources/org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim";
$in="Data/ap2.2gev075mev_all_alessandra.slcio";
$out="Data/foobar.slcio";
$jarfile="hps_trunk/distribution/target/hps-distribution-3.1-SNAPSHOT-bin.jar";
`java -jar $jarfile -f $steering -n 1000 -i $in -DoutputFile=$out  >& foobar`;
============================
On Jan 26, 2015, at 10:05 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote:
good... at least I am not alone ;-)
thanks for any hints you might have.
It seems it goes for a dry run by default - maybe there are some more new parameters to pass?
number of events to be processed? something trivial like this?
On Mon, 26 Jan 2015, Graham, Mathew Thomas wrote:
Yeah, I can finally verify I get the same thing.  I can browse through events (w/o
running a driver) no problem, but when I run (via command
line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and
endOfData without going through events.
[IMAGE]
On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]<mailto:[log in to unmask]>> wrote:

   Hi,

   sorry for not being able to help much here (trying to get the SVT in shape
   for shipping). I will try to run again as well sometime today; it was
   working last week so it?ll be interesting to see.

   /Pelle

   On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote:

         Hi Pelle,
         no, not yet, I am stuck...
         I have the same problem (and same behaviour) if I try to run the
         reconstruction at slac, so I doubt it could be an issue related
         to the connection to the database.
         Cheers
           Alessandra

         On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote:

               Alessandra, did you solve your problem? I think
               Jeremy added a fix for this?

               On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas
               <[log in to unmask]<mailto:[log in to unmask]>> wrote:

                     Actually, I can?t seem to connect to the
                     DB at all from where I am (Fermilab).  I
                     think FNAL has SLAC cut off, somehow;
                     they?ve always been jealous of us..I
                     can?t get to the svn repository either.
                      Here?s the log file for those
                     interested:
                     <foobar>

                     On Jan 21, 2015, at 10:38 PM, Graham,
                     Mathew Thomas
                     <[log in to unmask]<mailto:[log in to unmask]>> wrote:

                           So there are definitely
                           TrackerHits in your slcio
                           file?it looks fine to me.
                            I?ll try running some
                           readout.

                           On Jan 21, 2015, at 10:23
                           AM, Alessandra Filippi
                           <[log in to unmask]<mailto:[log in to unmask]>> wrote:

                                 hi,
                                 you can find the
                                 ap2* slcio it
                                 here:

                                 /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio

                                 can you try to
                                 see if you can
                                 read it
                                 properly? (and
                                 there's
                                 something in?)
                                 thanks!

                                 On Wed, 21 Jan
                                 2015, Hansson
                                 Adrian, Per Ola
                                 wrote:

                                       Hi,

                                       can
                                       you
                                       point
                                       us
                                       to
                                       the
                                       slcio
                                       file?

                                       On
                                       Jan
                                       21,
                                       2015,
                                       at
                                       7:30
                                       AM,
                                       Alessandra
                                       Filippi
                                       <[log in to unmask]<mailto:[log in to unmask]>>
                                       wrote:

                                             Hi
                                             all,
                                             sorry
                                             for
                                             the
                                             stupid
                                             question,
                                             but
                                             I
                                             am
                                             not
                                             able
                                             to
                                             get
                                             any
                                             result
                                             in
                                             running
                                             readout
                                             simulations,
                                             whichever
                                             steering
                                             lcsim
                                             file
                                             I
                                             use,
                                             and
                                             I
                                             need
                                             some
                                             help
                                             to
                                             get
                                             going.
                                             I
                                             produced
                                             a
                                             .slcio
                                             file
                                             with
                                             slic
                                             on
                                             two
                                             kinds
                                             of
                                             stdhep
                                             files
                                             (ap2.2gev075mev*
                                             and
                                             Takashi's
                                             new
                                             brems-mad1.92gev*),
                                             using
                                             the
                                             slic
                                             installation
                                             at
                                             slac
                                             (old,
                                             but
                                             working
                                             -
                                             I
                                             think).
                                             I
                                             am
                                             using
                                             the
                                             HPSTestRunTracker2014-v0.lcdd
                                             geometry
                                             file.
                                             Then,
                                             I
                                             try
                                             to
                                             produce
                                             a
                                             readout
                                             file,
                                             using
                                             the
                                             instructions
                                             in
                                             the
                                             confluence
                                             "Running
                                             Readout
                                             Simulation"
                                             page
                                             (lcsim
                                             and
                                             hps_trunk
                                             freshly
                                             updated).
                                             All
                                             I
                                             get,
                                             with
                                             both
                                             the
                                             .slcio
                                             files
                                             and
                                             whichever
                                             HPS2014Readout*.lcsim
                                             file,
                                             is
                                             the
                                             geometry
                                             survey
                                             of
                                             SVT
                                             (I
                                             guess),
                                             and
                                             nothing
                                             else:
                                             the
                                             reconstruction
                                             ends
                                             with
                                             Ecal/svt
                                             setup
                                             info

                                             Wed
                                             Jan
                                             21
                                             16:19:15
                                             CET
                                             2015
                                             ::
                                             EcalDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             loading
                                             ECAL
                                             conditions
                                             onto
                                             subdetector
                                             Ecal
                                             Wed
                                             Jan
                                             21
                                             16:19:15
                                             CET
                                             2015
                                             ::
                                             EcalDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             building
                                             ECAL
                                             geometry
                                             channel
                                             map
                                             Wed
                                             Jan
                                             21
                                             16:19:15
                                             CET
                                             2015
                                             ::
                                             EcalDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             built
                                             ECAL
                                             geometry
                                             channel
                                             with
                                             442
                                             entries
                                             Wed
                                             Jan
                                             21
                                             16:19:15
                                             CET
                                             2015
                                             ::
                                             EcalDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             done
                                             loading
                                             ECAL
                                             conditions
                                             onto
                                             subdetector
                                             Wed
                                             Jan
                                             21
                                             16:19:26
                                             CET
                                             2015
                                             ::
                                             SvtDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             loading
                                             SVT
                                             conditions
                                             onto
                                             subdetector
                                             Tracker
                                             Wed
                                             Jan
                                             21
                                             16:19:26
                                             CET
                                             2015
                                             ::
                                             SvtDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             setting
                                             up
                                             20
                                             SVT
                                             sensors
                                             Wed
                                             Jan
                                             21
                                             16:19:26
                                             CET
                                             2015
                                             ::
                                             SvtDetectorSetup
                                             ::
                                             INFO
                                             ::
                                             channel
                                             map
                                             has
                                             23040
                                             entries
                                             End
                                             of
                                             file
                                             reached
                                             Wed
                                             Jan
                                             21
                                             16:19:26
                                             CET
                                             2015
                                             ::
                                             DatabaseConditionsManager
                                             ::
                                             INFO
                                             ::
                                             connection
                                             closed

                                             and
                                             the
                                             readout
                                             file
                                             is
                                             empty.
                                             If
                                             I
                                             use
                                             HPSTrackingDefaults.lcsim,
                                             again
                                             on
                                             whichever
                                             kind
                                             of
                                             slcio
                                             file,
                                             after
                                             the
                                             drivers
                                             being
                                             loaded,
                                             I
                                             get

                                             Executed
                                             dry
                                             run.
                                              No
                                             events
                                             processed!

                                             and
                                             again
                                             nothing
                                             else
                                             is
                                             done.
                                             What
                                             am
                                             I
                                             doing
                                             wrong?
                                             Thanks,
                                             cheers
                                             Alessandra

                                             ps.
                                             I
                                             wanted
                                             to
                                             inspect
                                             the
                                             slcio
                                             files
                                             to
                                             see
                                             whether
                                             they
                                             had
                                             problems,
                                             but
                                             I
                                             cannot
                                             install
                                             JAS3
                                             for
                                             the
                                             issue
                                             mentioned
                                             in
                                             my
                                             previous
                                             e-mail.

                                             ########################################################################
                                             Use
                                             REPLY-ALL
                                             to
                                             reply
                                             to
                                             list

                                             To
                                             unsubscribe
                                             from
                                             the
                                             HPS-SOFTWARE
                                             list,
                                             click
                                             the
                                             following
                                             link:
                                             https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

                                       ########################################################################
                                       Use
                                       REPLY-ALL
                                       to
                                       reply
                                       to
                                       list

                                       To
                                       unsubscribe
                                       from
                                       the
                                       HPS-SOFTWARE
                                       list,
                                       click
                                       the
                                       following
                                       link:
                                       https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

                                 ########################################################################
                                 Use REPLY-ALL to
                                 reply to list

                                 To unsubscribe
                                 from the
                                 HPS-SOFTWARE
                                 list, click the
                                 following link:
                                 https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

                           ########################################################################
                           Use REPLY-ALL to reply to
                           list

                           To unsubscribe from the
                           HPS-SOFTWARE list, click the
                           following link:
                           https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1



########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1