What is the exact command that you are running which has this problem, Matt? On Jan 27, 2015, at 4:42 PM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: I think I’m seeing the same as I saw before…quitting after 0 events. What is the command you’re using to run this? On Jan 27, 2015, at 4:24 PM, Hansson Adrian, Per Ola <[log in to unmask]<mailto:[log in to unmask]>> wrote: I just did a clean checkout of lcsim and hps-java trunk on a different machine and ran the linked steering file over the linked slic output file. It looks fine. Can someone verify this as well? http://www.slac.stanford.edu/~phansson/files/temp/HPSTrackingDefaults.lcsim ap2.2gev075mev_SLIC-v04-00-00_Geant4-v10-00-02_QGSP_BERT_HPSTracker2014-v0.slcio<http://www.slac.stanford.edu/~phansson/files/temp/ap2.2gev075mev_SLIC-v04-00-00_Geant4-v10-00-02_QGSP_BERT_HPSTracker2014-v0.slcio> /Pelle On Jan 27, 2015, at 3:11 PM, McCormick, Jeremy I. <[log in to unmask]<mailto:[log in to unmask]>> wrote: Do you have any local changes that aren’t checked in to SVN Pelle? My guess is that when this problem is occurring on Alessandra’s machine that there is an error occurring but for some reason the traceback/message is being suppressed. On Jan 27, 2015, at 2:49 PM, Hansson Adrian, Per Ola <[log in to unmask]<mailto:[log in to unmask]>> wrote: It works fine for me. It feels like it should be the other way, but I guess I should figure out why it works :) <Screen Shot 2015-01-27 at 2.49.17 PM.png> On Jan 26, 2015, at 10:30 AM, Sho Uemura <[log in to unmask]<mailto:[log in to unmask]>> wrote: Never mind, I don't think that's right. There's nothing wrong with that config. I'll look at this during lunch. On Mon, 26 Jan 2015, Sho Uemura wrote: You;re right. The clusterer settings are not correct: <inputHitCollectionName>EcalReadoutAnalogHits</inputHitCollectionName> should be <inputHitCollectionName>EcalReadoutHits</inputHitCollectionName> I can't make or test the change on my computer here, but maybe someone else can. On Mon, 26 Jan 2015, Hansson Adrian, Per Ola wrote: Can this be related to changes on the ECal side? Maybe collection names has been changing? What happens if a collection is not found, maybe it skips the event? On Jan 26, 2015, at 10:08 AM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: I?m using this to run: =============================================== $steering="resources/org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim"; $in="Data/ap2.2gev075mev_all_alessandra.slcio"; $out="Data/foobar.slcio"; $jarfile="hps_trunk/distribution/target/hps-distribution-3.1-SNAPSHOT-bin.jar"; `java -jar $jarfile -f $steering -n 1000 -i $in -DoutputFile=$out >& foobar`; ============================ On Jan 26, 2015, at 10:05 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: good... at least I am not alone ;-) thanks for any hints you might have. It seems it goes for a dry run by default - maybe there are some more new parameters to pass? number of events to be processed? something trivial like this? On Mon, 26 Jan 2015, Graham, Mathew Thomas wrote: Yeah, I can finally verify I get the same thing. I can browse through events (w/o running a driver) no problem, but when I run (via command line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and endOfData without going through events. [IMAGE] On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi, sorry for not being able to help much here (trying to get the SVT in shape for shipping). I will try to run again as well sometime today; it was working last week so it?ll be interesting to see. /Pelle On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi Pelle, no, not yet, I am stuck... I have the same problem (and same behaviour) if I try to run the reconstruction at slac, so I doubt it could be an issue related to the connection to the database. Cheers Alessandra On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote: Alessandra, did you solve your problem? I think Jeremy added a fix for this? On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: Actually, I can?t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they?ve always been jealous of us..I can?t get to the svn repository either. Here?s the log file for those interested: <foobar> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]<mailto:[log in to unmask]>> wrote: So there are definitely TrackerHits in your slcio file?it looks fine to me. I?ll try running some readout. On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: hi, you can find the ap2* slcio it here: /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio can you try to see if you can read it properly? (and there's something in?) thanks! On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote: Hi, can you point us to the slcio file? On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi all, sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going. I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file. Then, I try to produce a readout file, using the instructions in the confluence "Running Readout Simulation" page (lcsim and hps_trunk freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess), and nothing else: the reconstruction ends with Ecal/svt setup info Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries End of file reached Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed and the readout file is empty. If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get Executed dry run. No events processed! and again nothing else is done. What am I doing wrong? Thanks, cheers Alessandra ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail. ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ________________________________ Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ________________________________ Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1