Standard cmd:
java -jar hps-distribution-3.1-SNAPSHOT-bin.jar HPSTrackingDefaults.lcsim -i ap2.2gev075mev_SLIC-v04-00-00_Geant4-v10-00-02_QGSP_BERT_HPSTracker2014-v0.slcio -DoutputFile=apout.slcio
I’m not sure what file Alessadra used. I think her slcio was generated by herself but the underlying std hep file was the same.
Alessandra, can you verify that you see events with my lcio file? Maybe you generated the slcio file with an old version of the detector lcdd?
/Pelle
On Jan 27, 2015, at 5:08 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
Ah, I didn’t realize the file Pelle linked to wasn’t the same as what Alessandra sent initially; when I run on Pelle’s file it works ok.
What’s the difference in the generation between Alessandra’s and Pelle’s generation?
On Jan 27, 2015, at 4:42 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
I think I’m seeing the same as I saw before…quitting after 0 events. What is the command you’re using to run this?
On Jan 27, 2015, at 4:24 PM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
I just did a clean checkout of lcsim and hps-java trunk on a different machine and ran the linked steering file over the linked slic output file. It looks fine. Can someone verify this as well?
/Pelle
On Jan 27, 2015, at 3:11 PM, McCormick, Jeremy I. <[log in to unmask]> wrote:
Do you have any local changes that aren’t checked in to SVN Pelle?
My guess is that when this problem is occurring on Alessandra’s machine that there is an error occurring but for some reason the traceback/message is being suppressed.
On Jan 27, 2015, at 2:49 PM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
It works fine for me. It feels like it should be the other way, but I guess I should figure out why it works :)
<Screen Shot 2015-01-27 at 2.49.17 PM.png>
On Jan 26, 2015, at 10:30 AM, Sho Uemura <[log in to unmask]> wrote:
Never mind, I don't think that's right. There's nothing wrong with that config. I'll look at this during lunch.
On Mon, 26 Jan 2015, Sho Uemura wrote:
You;re right.
The clusterer settings are not correct:
<inputHitCollectionName>EcalReadoutAnalogHits</inputHitCollectionName>
should be
<inputHitCollectionName>EcalReadoutHits</inputHitCollectionName>
I can't make or test the change on my computer here, but maybe someone else can.
On Mon, 26 Jan 2015, Hansson Adrian, Per Ola wrote:
Can this be related to changes on the ECal side? Maybe collection names has been changing? What happens if a collection is not found, maybe it skips the event?
On Jan 26, 2015, at 10:08 AM, Graham, Mathew Thomas <[log in to unmask]> wrote:
I?m using this to run:########################################################################
===============================================
$steering="resources/org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim";
$in="Data/ap2.2gev075mev_all_alessandra.slcio";
$out="Data/foobar.slcio";
$jarfile="hps_trunk/distribution/target/hps-distribution-3.1-SNAPSHOT-bin.jar";
`java -jar $jarfile -f $steering -n 1000 -i $in -DoutputFile=$out >& foobar`;
============================
On Jan 26, 2015, at 10:05 AM, Alessandra Filippi <[log in to unmask]> wrote:
good... at least I am not alone ;-)
thanks for any hints you might have.
It seems it goes for a dry run by default - maybe there are some more new parameters to pass?
number of events to be processed? something trivial like this?
On Mon, 26 Jan 2015, Graham, Mathew Thomas wrote:
Yeah, I can finally verify I get the same thing. I can browse through events (w/o
running a driver) no problem, but when I run (via command
line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and
endOfData without going through events.
[IMAGE]
On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
Hi,
sorry for not being able to help much here (trying to get the SVT in shape
for shipping). I will try to run again as well sometime today; it was
working last week so it?ll be interesting to see.
/Pelle
On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]> wrote:
Hi Pelle,
no, not yet, I am stuck...
I have the same problem (and same behaviour) if I try to run the
reconstruction at slac, so I doubt it could be an issue related
to the connection to the database.
Cheers
Alessandra
On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote:
Alessandra, did you solve your problem? I think
Jeremy added a fix for this?
On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas
<[log in to unmask]> wrote:
Actually, I can?t seem to connect to the
DB at all from where I am (Fermilab). I
think FNAL has SLAC cut off, somehow;
they?ve always been jealous of us..I
can?t get to the svn repository either.
Here?s the log file for those
interested:
<foobar>
On Jan 21, 2015, at 10:38 PM, Graham,
Mathew Thomas
<[log in to unmask]> wrote:
So there are definitely
TrackerHits in your slcio
file?it looks fine to me.
I?ll try running some
readout.
On Jan 21, 2015, at 10:23
AM, Alessandra Filippi
<[log in to unmask]> wrote:
hi,
you can find the
ap2* slcio it
here:
/nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
can you try to
see if you can
read it
properly? (and
there's
something in?)
thanks!
On Wed, 21 Jan
2015, Hansson
Adrian, Per Ola
wrote:
Hi,
can
you
point
us
to
the
slcio
file?
On
Jan
21,
2015,
at
7:30
AM,
Alessandra
Filippi
<[log in to unmask]>
wrote:
Hi
all,
sorry
for
the
stupid
question,
but
I
am
not
able
to
get
any
result
in
running
readout
simulations,
whichever
steering
lcsim
file
I
use,
and
I
need
some
help
to
get
going.
I
produced
a
.slcio
file
with
slic
on
two
kinds
of
stdhep
files
(ap2.2gev075mev*
and
Takashi's
new
brems-mad1.92gev*),
using
the
slic
installation
at
slac
(old,
but
working
-
I
think).
I
am
using
the
HPSTestRunTracker2014-v0.lcdd
geometry
file.
Then,
I
try
to
produce
a
readout
file,
using
the
instructions
in
the
confluence
"Running
Readout
Simulation"
page
(lcsim
and
hps_trunk
freshly
updated).
All
I
get,
with
both
the
.slcio
files
and
whichever
HPS2014Readout*.lcsim
file,
is
the
geometry
survey
of
SVT
(I
guess),
and
nothing
else:
the
reconstruction
ends
with
Ecal/svt
setup
info
Wed
Jan
21
16:19:15
CET
2015
::
EcalDetectorSetup
::
INFO
::
loading
ECAL
conditions
onto
subdetector
Ecal
Wed
Jan
21
16:19:15
CET
2015
::
EcalDetectorSetup
::
INFO
::
building
ECAL
geometry
channel
map
Wed
Jan
21
16:19:15
CET
2015
::
EcalDetectorSetup
::
INFO
::
built
ECAL
geometry
channel
with
442
entries
Wed
Jan
21
16:19:15
CET
2015
::
EcalDetectorSetup
::
INFO
::
done
loading
ECAL
conditions
onto
subdetector
Wed
Jan
21
16:19:26
CET
2015
::
SvtDetectorSetup
::
INFO
::
loading
SVT
conditions
onto
subdetector
Tracker
Wed
Jan
21
16:19:26
CET
2015
::
SvtDetectorSetup
::
INFO
::
setting
up
20
SVT
sensors
Wed
Jan
21
16:19:26
CET
2015
::
SvtDetectorSetup
::
INFO
::
channel
map
has
23040
entries
End
of
file
reached
Wed
Jan
21
16:19:26
CET
2015
::
DatabaseConditionsManager
::
INFO
::
connection
closed
and
the
readout
file
is
empty.
If
I
use
HPSTrackingDefaults.lcsim,
again
on
whichever
kind
of
slcio
file,
after
the
drivers
being
loaded,
I
get
Executed
dry
run.
No
events
processed!
and
again
nothing
else
is
done.
What
am
I
doing
wrong?
Thanks,
cheers
Alessandra
ps.
I
wanted
to
inspect
the
slcio
files
to
see
whether
they
had
problems,
but
I
cannot
install
JAS3
for
the
issue
mentioned
in
my
previous
e-mail.
########################################################################
Use
REPLY-ALL
to
reply
to
list
To
unsubscribe
from
the
HPS-SOFTWARE
list,
click
the
following
link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use
REPLY-ALL
to
reply
to
list
To
unsubscribe
from
the
HPS-SOFTWARE
list,
click
the
following
link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use REPLY-ALL to
reply to list
To unsubscribe
from the
HPS-SOFTWARE
list, click the
following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use REPLY-ALL to reply to
list
To unsubscribe from the
HPS-SOFTWARE list, click the
following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1