Hi Marian, Thank you for pointing this out. The "rejected" part may be due to the way the allow list works. Does unl list you in an allow entry in the config file? I will look at this. As far as not being able to reconnect, is that in IPv4 mode or IPv6 mode . Restarting the unl redirector will simply drop the connection to yours but yours should retry the connection after a short delay. What's in the log when unl restarts? Andy -----Original Message----- From: Erik Gough Sent: Tuesday, February 24, 2015 8:26 AM To: [log in to unmask] Cc: [log in to unmask] Subject: IPv6 cmsd connection issue Hello, We recently upgraded to xrootd 4.0.4 at Purdue and enabled IPv6 on our xrootd redirector and servers. We see an issue where cmsd is unable to connect to xrootd.unl.edu (another IPv6 enabled redirector). I attached our xrootd config. We point to the FNAL redirector for AAA. If I simply restart xrootd/cmsd on our redirector, any connection from either the CERN or FNAL redirector ends with a '[3011] No servers are available to read the file'. In the cmsd log I see this repeated every few seconds: 150220 10:27:34 34373 Login: xrootd.unl.edu login failed; rejected 150220 10:27:34 34373 Remove completed xrootd.unl.edu manager 1.17 150220 10:27:34 34373 Manager: manager.0:[log in to unmask] removed; lost connection If I disable ipv6 on our redirector, cmsd will immediately connect to xrootd.unl.edu using ipv4. 150220 10:28:01 34373 Add xrootd.unl.edu to manager config; id=1 150220 10:28:01 34373 ManTree: Now connected to 2 root node(s) 150220 10:28:01 34373 Protocol: Logged into xrootd.unl.edu Then if I enable ipv6 and restart the network service I am able to do both v4/v6 transfers using both CERN/FNAL redirectors. It seems like for AAA access, there is a requirement for me to have a cmsd connection to xrootd.unl.edu and it does not work over IPv6. Before I do the disable/enable v6 thing, I do not see a connection open between Purdue and UNL. I do see an ipv4 one between Purdue and FNAL without intervention on my part. After I disable/enable v6, I see this and things start working. cmsd 26416 xrootd 23u IPv4 2179617 0t0 TCP xrootd.rcac.purdue.edu:47154->xrootd.unl.edu:mpc-lifenet (ESTABLISHED) If the UNL redirector gets restarted, that connection is lost and I have to the restart/enable/disable steps again for redirection from CERN or FNAL to work. It seems like there is some ipv6 weirdness between the UNL and Purdue redirector. Is this a known issue? Perhaps it is already solved in the 4.1.1 release? If so, we can just wait for OSG to release it and upgrade. But, I figured I should let you know what I found just in case you had not seen this issue before. Thanks, -Erik ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the XROOTD-L list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=XROOTD-L&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the XROOTD-L list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=XROOTD-L&A=1