Print

Print


I confirmed already that setting a different value for the opening angle works fine provided you use the detector aliasing so the xml is read from disk rather than the jar.  The new value will get picked up in your next session when the conditions are reset. The detector itself loads fine without errors or at least it did some time ago.

As far as checking other things like the recon and conditions, I believe Omar would be the best person to do this as he's already working on SVT monitoring drivers.  So all that is needed to do is check that the recon looks okay when you select that particular detector model in the job settings.  This is probably best checked and confirmed by a tracking expert.

> On Mar 13, 2015, at 12:59 PM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
> 
> Hi again,
> 
> I didnít hear back from anyone. 
> 
> Jeremy, I see that you are doing work with the monitoring and you are at JLab. Iím not setting the priorities but I think this task is pretty high on the list for HPS. Can you help? Perhaps some of the shifters that have some experience with the software can look into this as well when there is no beam?
> 
> /pellle
> 
> 
>> On Mar 11, 2015, at 2:30 PM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
>> 
>> Dear All,
>> 
>> as things are going I donít seem to get time to check that the new detector geometry works as expected in the online monitoring. Can  someone exercise the new detector I announced earlier with the monitoring?
>> 
>> In particular we need to verify that changing the opening angle in the compact and restart the session actually does what we expect i.e. moves the detector. 
>> 
>> Since we are getting closer to running and we would not be able to get tracks without this working itís becoming more and more a critical item.
>> 
>> Who can help? I can provide more info.
>> 
>> /Pelle
>> 
>> ########################################################################
>> Use REPLY-ALL to reply to list
>> 
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
> 
> ########################################################################
> Use REPLY-ALL to reply to list
> 
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1