 |
 |
Rafo, There are two EPICS banks, they are differ by ban names. One gets updated every 2 seconds, I think, another one ever 20 (10) seconds. The one that you are showing is the one gets updated every 2 sec. SVT motor positions are in the slow updated bank. Stepan On 6/9/15 12:16 PM, Rafayel Paremuzyan wrote: > Hi, > > I am trying to retrieve svt position from epics scaler bank, > in order to skip events where svt edge position is not at 0.5 mm, > but looks like it is only bias voltage is there. > How should I determine these events and skip them? > > This is EPICS bank from one particular event. > > Rafo > > 1058.573608 MBSY2C_energy > 372.671112 PSPECIRBCK > -2197.000000 HPS:LS450_2:FIELD > -2694.000000 HPS:LS450_1:FIELD > 708.000000 MTIRBCK > 3.836423 VCG2C21 > 4.527047 VCG2C21A > 6.698710 VCG2C24A > 6.538491 VCG2H00A > 6.037385 VCG2H01A > 9.604944 VCG2H02A > 49.972569 scaler_calc1 > 117.000000 scalerS12b > 351.500000 scalerS13b > 32740.500000 scalerS14b > 414065.500000 scalerS15b > 0.139618 hallb_IPM2C21A_XPOS > -0.352926 hallb_IPM2C21A_YPOS > 49.862198 hallb_IPM2C21A_CUR > 0.112695 hallb_IPM2C24A_XPOS > -0.685934 hallb_IPM2C24A_YPOS > 50.302650 hallb_IPM2C24A_CUR > -2.644415 hallb_IPM2H00_XPOS > 0.577277 hallb_IPM2H00_YPOS > -2.644415 hallb_IPM2H00_XPOS > -2.644415 hallb_IPM2H00_XPOS > 7.042749 hallb_IPM2H00_CUR > -0.687935 hallb_IPM2H02_YPOS > -1.845073 hallb_IPM2H02_XPOS > 4.966487 SVT:bias:top:0:v_sens > > > ------------------------------------------------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1