Hi Rafo, we are putting together a good run list that will be used to select both HV and position information. I hope it will be done within 1-2 days. In the mean time, for the position, I think you can’t do it unless you manually look at MYA. /pelle On Jun 9, 2015, at 9:16 AM, Rafayel Paremuzyan <[log in to unmask]<mailto:[log in to unmask]>> wrote: Hi, I am trying to retrieve svt position from epics scaler bank, in order to skip events where svt edge position is not at 0.5 mm, but looks like it is only bias voltage is there. How should I determine these events and skip them? This is EPICS bank from one particular event. Rafo 1058.573608 MBSY2C_energy 372.671112 PSPECIRBCK -2197.000000 HPS:LS450_2:FIELD -2694.000000 HPS:LS450_1:FIELD 708.000000 MTIRBCK 3.836423 VCG2C21 4.527047 VCG2C21A 6.698710 VCG2C24A 6.538491 VCG2H00A 6.037385 VCG2H01A 9.604944 VCG2H02A 49.972569 scaler_calc1 117.000000 scalerS12b 351.500000 scalerS13b 32740.500000 scalerS14b 414065.500000 scalerS15b 0.139618 hallb_IPM2C21A_XPOS -0.352926 hallb_IPM2C21A_YPOS 49.862198 hallb_IPM2C21A_CUR 0.112695 hallb_IPM2C24A_XPOS -0.685934 hallb_IPM2C24A_YPOS 50.302650 hallb_IPM2C24A_CUR -2.644415 hallb_IPM2H00_XPOS 0.577277 hallb_IPM2H00_YPOS -2.644415 hallb_IPM2H00_XPOS -2.644415 hallb_IPM2H00_XPOS 7.042749 hallb_IPM2H00_CUR -0.687935 hallb_IPM2H02_YPOS -1.845073 hallb_IPM2H02_XPOS 4.966487 SVT:bias:top:0:v_sens ________________________________ Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1