Hi,
I am trying to retrieve svt position from epics scaler bank,
in order to skip events where svt edge position is not at 0.5 mm,
but looks like it is only bias voltage is there.
How should I determine these events and skip them?
This is EPICS bank from one particular event.
Rafo
1058.573608 MBSY2C_energy
372.671112 PSPECIRBCK
-2197.000000 HPS:LS450_2:FIELD
-2694.000000 HPS:LS450_1:FIELD
708.000000 MTIRBCK
3.836423 VCG2C21
4.527047 VCG2C21A
6.698710 VCG2C24A
6.538491 VCG2H00A
6.037385 VCG2H01A
9.604944 VCG2H02A
49.972569 scaler_calc1
117.000000 scalerS12b
351.500000 scalerS13b
32740.500000 scalerS14b
414065.500000 scalerS15b
0.139618 hallb_IPM2C21A_XPOS
-0.352926 hallb_IPM2C21A_YPOS
49.862198 hallb_IPM2C21A_CUR
0.112695 hallb_IPM2C24A_XPOS
-0.685934 hallb_IPM2C24A_YPOS
50.302650 hallb_IPM2C24A_CUR
-2.644415 hallb_IPM2H00_XPOS
0.577277 hallb_IPM2H00_YPOS
-2.644415 hallb_IPM2H00_XPOS
-2.644415 hallb_IPM2H00_XPOS
7.042749 hallb_IPM2H00_CUR
-0.687935 hallb_IPM2H02_YPOS
-1.845073 hallb_IPM2H02_XPOS
4.966487 SVT:bias:top:0:v_sens
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1