Print

Print


So this is not a problem with the pass1 DSTs, but
a problem in the code used to read them?

-Nathan




On Jul 7, 2015, at 2:18 PM, "Maruyama, Takashi" <[log in to unmask]> wrote:

> Thank you, Nathan.  There is a typo in HpsEvent.h. 
> 
> bool isSingle1Trigger() const { return (bool) single0_trigger; }  ;  
> 
> "single0_trigger" should be "single1_trigger".
> 
> Takashi
> 
> -----Original Message-----
> From: Nathan Baltzell [mailto:[log in to unmask]] 
> Sent: Tuesday, July 07, 2015 10:27 AM
> To: Maruyama, Takashi
> Cc: hps-software
> Subject: Re: Trigger bits problem in pass1 DST
> 
> Hi Takashi,
> 
> I'm not seeing the same by just counting events with no trigger bits set according to the DST variables.  For example, this returns zero for the file you mentioned and a few others I tried:
> 
> HPS_Event->GetEntries("pair1_trigger+pair0_trigger+pulser_trigger+single0_trigger+single1_trigger == 0")
> 
> -Nathan
> 
> 
> On Jul 7, 2015, at 13:06, Maruyama, Takashi <[log in to unmask]> wrote:
> 
>> There is a minor problem in trigger bits in pass1 DST. There are about 7% of events with no trigger bits set. There are about 2% of events with both Single0 and Single1. Kyle dumped first 1000 EVIO events in Run 5797 File 0, and I compared with the DST. Here is a work around.
>> 
>> 1) If both Single0 and Single1 are set, it is Single0.
>> 2) If no trigger bits are set, it is Single1.
>> 
>> Everything else is correct.
>> 
>> Takashi
>> 
>> ######################################################################
>> ##
>> Use REPLY-ALL to reply to list
>> 
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
> 
> ########################################################################
> Use REPLY-ALL to reply to list
> 
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1

########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1