 |
 |
Hi Jeremy, Did you ever test your changes to the conditions DB using Monte Carlo? --Omar Moreno On Fri, Mar 11, 2016 at 11:22 AM, Bradley T Yale <[log in to unmask]> wrote: > For clarity, it looks like tpass6 actually used > 'hps-distribution-3.6-20160229.015546-43-bin.jar' not the '3.6 release', > but the same run number problem happens for that jar as well. > > > > ------------------------------ > *From:* [log in to unmask] <[log in to unmask]> > on behalf of Bradley T Yale <[log in to unmask]> > *Sent:* Friday, March 11, 2016 1:24 PM > *To:* [log in to unmask]; [log in to unmask]; Sebouh Paul > *Subject:* Re: Too few Pass6 Moller events in MC > > > Investigating further, this may be the problem: > > > Apparently, the most recent jar (3.6 release) always sets the run number > to '0', even when specifying it in the command with -Drun=5772. > > All jars that were checked before the problematic 3.6.1 appear to assign > the correct run number of 5772. > > It should be checked if this also affects data reconstructed with 3.6, or > only Monte Carlo. In any case, this would definitely be a thing to fix. > > > -Brad > > ------------------------------ > *From:* [log in to unmask] <[log in to unmask]> > on behalf of Bradley T Yale <[log in to unmask]> > *Sent:* Thursday, March 10, 2016 7:06 PM > *To:* [log in to unmask]; [log in to unmask]; Sebouh Paul > *Subject:* Too few Pass6 Moller events in MC > > > I know this was supposed to be the "final pass", > > but it looks like there are far too few Moller events being readout in > Pass 6 Monte Carlo. > > > Looking further into this, it is because the >3-hit clusters in Pass 6 are > getting decimated BEFORE the trigger for some reason (see attached plots), > and so they no longer pass the cluster hit count threshold. These were made > using exactly the same filtered SLIC events, and the same steering file > with the same apparent thresholds in the GTP clusterer and trigger. > > The difference must be elsewhere in the drivers themselves. > > > These plots compare > > hps-distribution-3.5-20151218.205540-15-bin.jar > > with > > hps-distribution-3.6-bin.jar > > > both using the 'EngineeringRun2015TrigSingles1_Pass2.lcsim' steering file. > > > A more recent 3.5 jar (1/25/2016) gives a similar number of events as Pass > 4, and so the key difference must be with 3.6. > > > -Brad > > ------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > ------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > ------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1