Same with the compact.xml: < <!-- Global Millepede tweak parameters (survey constraints)--> < <!-- < <constant name="dOmega_top" value="1.56e-5" /> < <constant name="dLambda_top" value="0.16e-3" /> < <constant name="dPhi_top" value="6.87e-3" /> < <constant name="dD0_top" value="-0.72" /> < <constant name="dZ0_top" value="-0.13" /> < <constant name="dOmega_bot" value="2.32e-5" /> < <constant name="dLambda_bot" value="-0.06e-3" /> < <constant name="dPhi_bot" value="17.92e-3" /> < <constant name="dD0_bot" value="-6.71" /> < <constant name="dZ0_bot" value="0.04" /> < --> < < <!-- Global Millepede tweak parameters (mixed constraints: FEE momentum set at 1.05 GeV, top and bottom must agree on d0 and z0)--> < <constant name="dOmega_top" value="4e-06" /> < <constant name="dLambda_top" value="0.000237368375145" /> < <constant name="dPhi_top" value="0.000581084829307" /> < <constant name="dD0_top" value="0.622163643926" /> < <constant name="dZ0_top" value="-0.183211761644" /> < <constant name="dOmega_bot" value="2.5e-05" /> < <constant name="dLambda_bot" value="-0.000181541707685" /> < <constant name="dPhi_bot" value="0.0171848562935" /> < <constant name="dD0_bot" value="-5.87783635607" /> < <constant name="dZ0_bot" value="0.116788238356" /> < < <!-- Global Millepede tweak parameters (external constraints)--> < <!-- < <constant name="dOmega_top" value="0.1e-5" /> < <constant name="dLambda_top" value="0.5e-3" /> < <constant name="dPhi_top" value="1.5e-3" /> < <constant name="dD0_top" value="0.8" /> < <constant name="dZ0_top" value="-0.15" /> < <constant name="dOmega_bot" value="2.4e-5" /> < <constant name="dLambda_bot" value="1.5e-3" /> < <constant name="dPhi_bot" value="17e-3" /> < <constant name="dD0_bot" value="-5.6" /> < <constant name="dZ0_bot" value="0.2" /> < --> < --- > <!-- Global Millepede tweak parameters--> > <constant name="dOmega_top" value="0.0" /> > <constant name="dLambda_top" value="0.0" /> > <constant name="dPhi_top" value="0.0" /> > <constant name="dD0_top" value="0.0" /> > <constant name="dZ0_top" value="0.0" /> > <constant name="dOmega_bot" value="0.0" /> > <constant name="dLambda_bot" value="0.0" /> > <constant name="dPhi_bot" value="0.0" /> > <constant name="dD0_bot" value="0.0" /> > <constant name="dZ0_bot" value="0.0" /> This apparently comes from the Nominal v5-0 lcdd/compact not having them set, from where it was copied. ________________________________ From: [log in to unmask] <[log in to unmask]> on behalf of Bradley T Yale <[log in to unmask]> Sent: Thursday, October 20, 2016 12:58 PM To: Omar Moreno Cc: hps-software; Alessandra Filippi Subject: Re: Readout Error with new detector Running a diff between the v5-0 and v4-4 1.5mm detectors, it looks like these values are not getting assigned properly: < <constant name="dLambda_bot" value="-1.81541707685E-4" /> --- > <constant name="dLambda_bot" value="0.0" /> 133c133 < <constant name="dPhi_bot" value="0.0171848562935" /> --- > <constant name="dPhi_bot" value="0.0" /> 136c136 < <constant name="dZ0_bot" value="0.116788238356" /> --- > <constant name="dZ0_bot" value="0.0" /> 142c142 < <constant name="dD0_top" value="0.622163643926" /> --- > <constant name="dD0_top" value="0.0" /> 144c144 < <constant name="dOmega_top" value="4.0E-6" /> --- > <constant name="dOmega_top" value="0.0" /> 155,156c155,156 < <constant name="dZ0_top" value="-0.183211761644" /> < <constant name="dPhi_top" value="5.81084829307E-4" /> --- > <constant name="dZ0_top" value="0.0" /> > <constant name="dPhi_top" value="0.0" /> 174c174 < <constant name="dLambda_top" value="2.37368375145E-4" /> --- > <constant name="dLambda_top" value="0.0" /> 181c181 < <constant name="dD0_bot" value="-5.87783635607" /> --- > <constant name="dD0_bot" value="0.0" /> 184c184 < <constant name="dOmega_bot" value="2.5E-5" /> --- > <constant name="dOmega_bot" value="0.0" /> ________________________________ From: Omar Moreno <[log in to unmask]> Sent: Thursday, October 20, 2016 12:34:45 PM To: Bradley T Yale Cc: hps-software; Alessandra Filippi Subject: Re: Readout Error with new detector Can you check the lcdd file to make sure the correct opening angle was picked up? On Oct 20, 2016 9:04 AM, "Bradley T Yale" <[log in to unmask]<mailto:[log in to unmask]>> wrote: The .lcdd I used was built from the compact.xml. ________________________________ From: Alessandra Filippi <[log in to unmask]<mailto:[log in to unmask]>> Sent: Thursday, October 20, 2016 3:46:50 AM To: Bradley T Yale Cc: [log in to unmask]<mailto:[log in to unmask]> Subject: Re: Readout Error with new detector Hi Bradley, to my experience this is the typical error when you have a mismatch of the geometries used for the slic generation, readout and the reconstruction Are you sure you are running slic usng the proper lcdd file? (also check that the geometry names are everywhere consistent, in .lcdd and compact.xml files). Once you disable reading from the DB the svt geometry the run number you insert is not really useful. cheers Alessandra On Thu, 20 Oct 2016, Bradley T Yale wrote: > > Running readout on A's with the new 1.5mm detector ('HPS-EngRun2015-1_5mm-v5-0-fieldmap'), > > this error occurs: > > > java.lang.RuntimeException: Distance is outside of sensor by more than 0.001. Distance = > 0.45499278811630983. If this is an isolated event, then perhaps DISTANCE_ERROR_THRESHOLD > must be increased in CDFSiSensorSim > > > It happens when setting either run 5412 (1.5mm) or 5772 in the java command: > > > java -DdisableSvtAlignmentConstants -XX:+UseSerialGC -Xmx500m -jar ${hps-java} > > -r /org/hps/steering/readout/EngineeringRun2015TrigPairs1_Pass2.lcsim > > -i in.slcio -DoutputFile=out -Ddetector=HPS-EngRun2015-1_5mm-v5-0-fieldmap -Drun=5412 > > > Did anything change lately that could cause this? > > > > __________________________________________________________________________________________ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > > > ________________________________ Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ________________________________ Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1