Print

Print

Same with the compact.xml:

<         <!-- Global Millepede tweak parameters (survey constraints)-->
<         <!--
<         <constant name="dOmega_top" value="1.56e-5" />
<         <constant name="dLambda_top" value="0.16e-3" />
<         <constant name="dPhi_top" value="6.87e-3" />
<         <constant name="dD0_top" value="-0.72" />
<         <constant name="dZ0_top" value="-0.13" />
<         <constant name="dOmega_bot" value="2.32e-5" />
<         <constant name="dLambda_bot" value="-0.06e-3" />
<         <constant name="dPhi_bot" value="17.92e-3" />
<         <constant name="dD0_bot" value="-6.71" />
<         <constant name="dZ0_bot" value="0.04" />
<                                 -->
<
<         <!-- Global Millepede tweak parameters (mixed constraints: FEE momentum set at 1.05 GeV, top and bottom must agree on d0 and z0)-->
<         <constant name="dOmega_top" value="4e-06" />
<         <constant name="dLambda_top" value="0.000237368375145" />
<         <constant name="dPhi_top" value="0.000581084829307" />
<         <constant name="dD0_top" value="0.622163643926" />
<         <constant name="dZ0_top" value="-0.183211761644" />
<         <constant name="dOmega_bot" value="2.5e-05" />
<         <constant name="dLambda_bot" value="-0.000181541707685" />
<         <constant name="dPhi_bot" value="0.0171848562935" />
<         <constant name="dD0_bot" value="-5.87783635607" />
<         <constant name="dZ0_bot" value="0.116788238356" />
<
<         <!-- Global Millepede tweak parameters (external constraints)-->
<         <!--
<         <constant name="dOmega_top" value="0.1e-5" />
<         <constant name="dLambda_top" value="0.5e-3" />
<         <constant name="dPhi_top" value="1.5e-3" />
<         <constant name="dD0_top" value="0.8" />
<         <constant name="dZ0_top" value="-0.15" />
<         <constant name="dOmega_bot" value="2.4e-5" />
<         <constant name="dLambda_bot" value="1.5e-3" />
<         <constant name="dPhi_bot" value="17e-3" />
<         <constant name="dD0_bot" value="-5.6" />
<         <constant name="dZ0_bot" value="0.2" />
<                                 -->
<
---
>         <!-- Global Millepede tweak parameters-->
>         <constant name="dOmega_top" value="0.0" />
>         <constant name="dLambda_top" value="0.0" />
>         <constant name="dPhi_top" value="0.0" />
>         <constant name="dD0_top" value="0.0" />
>         <constant name="dZ0_top" value="0.0" />
>         <constant name="dOmega_bot" value="0.0" />
>         <constant name="dLambda_bot" value="0.0" />
>         <constant name="dPhi_bot" value="0.0" />
>         <constant name="dD0_bot" value="0.0" />
>         <constant name="dZ0_bot" value="0.0" />


This apparently comes from the Nominal v5-0 lcdd/compact not having them set, from where it was copied.



From: [log in to unmask] <[log in to unmask]> on behalf of Bradley T Yale <[log in to unmask]>
Sent: Thursday, October 20, 2016 12:58 PM
To: Omar Moreno
Cc: hps-software; Alessandra Filippi
Subject: Re: Readout Error with new detector
 

Running a diff between the v5-0 and v4-4 1.5mm detectors,
it looks like these values are not getting assigned properly:

<       <constant name="dLambda_bot" value="-1.81541707685E-4" />
---
>       <constant name="dLambda_bot" value="0.0" />
133c133
<       <constant name="dPhi_bot" value="0.0171848562935" />
---
>       <constant name="dPhi_bot" value="0.0" />
136c136
<       <constant name="dZ0_bot" value="0.116788238356" />
---
>       <constant name="dZ0_bot" value="0.0" />
142c142
<       <constant name="dD0_top" value="0.622163643926" />
---
>       <constant name="dD0_top" value="0.0" />
144c144
<       <constant name="dOmega_top" value="4.0E-6" />
---
>       <constant name="dOmega_top" value="0.0" />
155,156c155,156
<       <constant name="dZ0_top" value="-0.183211761644" />
<       <constant name="dPhi_top" value="5.81084829307E-4" />
---
>       <constant name="dZ0_top" value="0.0" />
>       <constant name="dPhi_top" value="0.0" />
174c174
<       <constant name="dLambda_top" value="2.37368375145E-4" />
---
>       <constant name="dLambda_top" value="0.0" />
181c181
<       <constant name="dD0_bot" value="-5.87783635607" />
---
>       <constant name="dD0_bot" value="0.0" />
184c184
<       <constant name="dOmega_bot" value="2.5E-5" />
---
>       <constant name="dOmega_bot" value="0.0" />



From: Omar Moreno <[log in to unmask]>
Sent: Thursday, October 20, 2016 12:34:45 PM
To: Bradley T Yale
Cc: hps-software; Alessandra Filippi
Subject: Re: Readout Error with new detector
 

Can you check the lcdd file to make sure the  correct opening angle was picked up?


On Oct 20, 2016 9:04 AM, "Bradley T Yale" <[log in to unmask]> wrote:

The .lcdd I used was built from the compact.xml.

From: Alessandra Filippi <[log in to unmask]>
Sent: Thursday, October 20, 2016 3:46:50 AM
To: Bradley T Yale
Cc: [log in to unmask]
Subject: Re: Readout Error with new detector
 
Hi Bradley,
to my experience this is the typical error when you have a mismatch of the
geometries used for the slic generation, readout and the reconstruction
Are you sure you are running slic usng the proper lcdd file? (also check
that the geometry names are everywhere consistent, in .lcdd and
compact.xml files).
Once you disable reading from the DB the svt geometry the run number you
insert is not really useful.
cheers
    Alessandra



On Thu, 20 Oct 2016, Bradley T Yale wrote:

>
> Running readout on A's with the new 1.5mm detector ('HPS-EngRun2015-1_5mm-v5-0-fieldmap'),
>
> this error occurs:
>
>
> java.lang.RuntimeException: Distance is outside of sensor by more than 0.001. Distance =
> 0.45499278811630983. If this is an isolated event, then perhaps DISTANCE_ERROR_THRESHOLD
> must be increased in CDFSiSensorSim
>
>
> It happens when setting either run 5412 (1.5mm) or 5772 in the java command:
>
>
> java -DdisableSvtAlignmentConstants -XX:+UseSerialGC -Xmx500m -jar ${hps-java}
>
> -r /org/hps/steering/readout/EngineeringRun2015TrigPairs1_Pass2.lcsim
>
> -i in.slcio -DoutputFile=out -Ddetector=HPS-EngRun2015-1_5mm-v5-0-fieldmap -Drun=5412
>
>
> Did anything change lately that could cause this?
>
>
>
> __________________________________________________________________________________________
>
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
>

Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1


Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1


Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1