Print

Print


Yes, we need/want a 1.5 mm version of v5-0 for MC.  I think Bradís going to try the suggested options (starting with -r).






On Oct 18, 2016, at 17:02, Hansson Adrian, Per Ola <[log in to unmask]> wrote:

> If I understand correctly what you want to do, if you look in the compact.xml there are parameters) that tells you the opening angle of the tracker L1-3.
> 
> 
>             <!-- top support tilt angles -->
>  
>             <millepede_constant name="13100" value="0.0031" /> <!-- + means opening-->
>             <millepede_constant name="13200" value="0.0" />
>             <millepede_constant name="13300" value="0.0" />
>             
>             <!-- bottom support tilt angles -->
>             <millepede_constant name="23100" value="-0.0033" />  <!-- - means opening -->
>             <millepede_constant name="23200" value="0.0" />
>             <millepede_constant name="23300" value="0.0" />
>   
> 
> When you create the LCDD for slic it would use these values I think.
> 
> /pelle
> 
> 
> 
>> On Oct 18, 2016, at 1:36 PM, Sho Uemura <[log in to unmask]> wrote:
>> 
>> Correct - the run DB has that info so readout/recon should be fine. I'm guessing Holly's asking about making an LCDD for running SLIC (SLIC doesn't know about the conditions DB). I think DetectorConverter (see https://confluence.slac.stanford.edu/display/hpsg/Detector+Geometry+Overview) has a -r option that lets you specify a run number.
>> 
>> On Tue, 18 Oct 2016, Nathan Baltzell wrote:
>> 
>>> Isn't it the case that v4-4, v5-* detectors get the first layers' positions (0.5/1.5 mm) from the run database?  I forgot.  Sho/Pelle?
>>> 
>>> -nathan
>>> 
>>> 
>>> On Oct 18, 2016, at 2:19 PM, Holly Vance <[log in to unmask]> wrote:
>>> 
>>>> Hi all,
>>>> 
>>>> Is there any easy way to generate a 1.5mm detector for the 2015 running using all of the latest updated post trident fixes?
>>>> 
>>>> Thanks,
>>>> Holly
>>>> 
>>>> Use REPLY-ALL to reply to list
>>>> 
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>> 
>>> 
>>> ########################################################################
>>> Use REPLY-ALL to reply to list
>>> 
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>> 
>> 
>> ########################################################################
>> Use REPLY-ALL to reply to list
>> 
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
> 

########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1