 |
 |
Hello Norman, The geometry exists in the iss40 branch as detector "HPS-PhysicsRun2016-HodoscopeDualPlane-v0-2pt3-fieldmap". I'm confident that there is no intersection, though - it was just a scoring plane that is fairly close to the edge of the vacuum box, but now that I got the Python script working, I was able to visually verify that it does not intersect. It's never a bad idea to verify, but if it is overly complicated to do, you don't need to worry about it. Thanks, Kyle On Wed, Jul 19, 2017 at 11:38 AM, Graf, Norman A. <[log in to unmask]> wrote: > Hello Kyle, > > Is the geometry you are developing checked in? I can run the overlap > checker for you. > > Norman > > > > > ------------------------------ > *From:* [log in to unmask] <[log in to unmask]> > on behalf of Kyle McCarty <[log in to unmask]> > *Sent:* Tuesday, July 18, 2017 9:12 AM > *To:* Maurik Holtrop > *Cc:* Alessandra Filippi; hps-software > *Subject:* Re: Geometry Viewer > > Hello, > > I was able to get it working well enough to see that there was no overlap > using the wireframe display option and orthographic projections, so I was > able to accomplish my goal. The current geometry tests are not > sophisticated enough to really necessitate a computer-driven intersection > test, though this may be useful in the future. > > Thanks, > > Kyle > > On Tue, Jul 18, 2017 at 11:59 AM, Maurik Holtrop <[log in to unmask]> > wrote: > >> Hello Kyle, >> >> If you are using the method: LCDD -> GDML -> ROOT , which is probably the >> script you are talking about, then you can check the overlaps also using >> the ROOT geometry tools. >> >> Please let me know if you still have an issue checking for overlaps. >> >> Best, >> Maurik >> >> On Jul 18, 2017, at 10:35 AM, Kyle McCarty <[log in to unmask]> wrote: >> >> Hello Alessandra, >> >> Thanks for the response. I couldn't the SLIC method to work. I can't >> install SLIC, due to compatibility issues, on my local machine and it was >> struggling to use X11 forwarding from a machine where it does work. >> However, I found a Python script on the same page that I was able to get to >> render, so it fixed my problem anyway. This properly shows the vacuum box. >> >> Thanks, >> >> Kyle >> >> On Tue, Jul 18, 2017 at 5:27 AM, Alessandra Filippi <[log in to unmask]> >> wrote: >> >>> Hi Kyle, >>> I way I use to inspect geometries is to view the lcdd file through slic. >>> If it still works, here there are some explanations about how to do it: >>> https://confluence.slac.stanford.edu/display/hpsg/Detector+G >>> eometry+Overview >>> >>> maybe it's too coarse to your needs, but usually gives helpful >>> information. I don't remember about the vacuum box being displayed by >>> defauls but if not it can be switched on in the rendering. >>> Hope this helps, cheers >>> Alessandra >>> >>> >>> >>> >>> >>> >>> >>> >>> On Mon, 17 Jul 2017, Kyle McCarty wrote: >>> >>> Hello, >>>> I need to display the complete HPS geometry to check for overlap in >>>> components. >>>> >>>> I know how to convert a geometry to heprep and view it in JAS3, but this >>>> only displays a portion. It excludes the vacuum box, which is the >>>> relevant >>>> piece in this case. Does anyone know how this may be done? >>>> >>>> Thanks. >>>> >>>> Kyle >>>> >>>> ____________________________________________________________ >>>> ________________ >>>> >>>> Use REPLY-ALL to reply to list >>>> >>>> To unsubscribe from the HPS-SOFTWARE list, click the following link: >>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >>>> >>>> >>>> >>>> >> >> ------------------------------ >> >> Use REPLY-ALL to reply to list >> >> To unsubscribe from the HPS-SOFTWARE list, click the following link: >> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >> >> >> >> ------------------------------ >> >> Use REPLY-ALL to reply to list >> >> To unsubscribe from the HPS-SOFTWARE list, click the following link: >> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 >> > > > ------------------------------ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 > ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1