 |
 |
Hello Kyle, If you are using the method: LCDD -> GDML -> ROOT , which is probably the script you are talking about, then you can check the overlaps also using the ROOT geometry tools. Please let me know if you still have an issue checking for overlaps. Best, Maurik > On Jul 18, 2017, at 10:35 AM, Kyle McCarty <[log in to unmask]> wrote: > > Hello Alessandra, > > Thanks for the response. I couldn't the SLIC method to work. I can't install SLIC, due to compatibility issues, on my local machine and it was struggling to use X11 forwarding from a machine where it does work. However, I found a Python script on the same page that I was able to get to render, so it fixed my problem anyway. This properly shows the vacuum box. > > Thanks, > > Kyle > > On Tue, Jul 18, 2017 at 5:27 AM, Alessandra Filippi <[log in to unmask] <mailto:[log in to unmask]>> wrote: > Hi Kyle, > I way I use to inspect geometries is to view the lcdd file through slic. If it still works, here there are some explanations about how to do it: > https://confluence.slac.stanford.edu/display/hpsg/Detector+Geometry+Overview <https://confluence.slac.stanford.edu/display/hpsg/Detector+Geometry+Overview> > > maybe it's too coarse to your needs, but usually gives helpful information. I don't remember about the vacuum box being displayed by defauls but if not it can be switched on in the rendering. > Hope this helps, cheers > Alessandra > > > > > > > > > On Mon, 17 Jul 2017, Kyle McCarty wrote: > > Hello, > I need to display the complete HPS geometry to check for overlap in > components. > > I know how to convert a geometry to heprep and view it in JAS3, but this > only displays a portion. It excludes the vacuum box, which is the relevant > piece in this case. Does anyone know how this may be done? > > Thanks. > > Kyle > > ____________________________________________________________________________ > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 <https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1> > > > > > > Use REPLY-ALL to reply to list > > To unsubscribe from the HPS-SOFTWARE list, click the following link: > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1 <https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1> ######################################################################## Use REPLY-ALL to reply to list To unsubscribe from the HPS-SOFTWARE list, click the following link: https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1