Print

---

Hi Sebastien,

I see your point. I would say as long you just use the values not the 
header file itsef, you should be safe. If you feel uncomfortable doing 
that, I should be able to ass the values to he document in about a week.

Andy

On Wed, 14 Feb 2018, Sebastien Binet wrote:

> Hi Andy,
>
> On Feb 14, 2018 10:07 PM, "Andrew Hanushevsky" <[log in to unmask]>
> wrote:
>
> Hi Sebastien,
>
> Correct, I will do that
>
> Thanks!
>
> they won't differ from what is in XProtocol.hh, so for now use those
> definitions (the names mentioned in the spec are the same in the hh file).
>
> Ok, but unless one can guarantee this won't be considered as derived work,
> I can't do that (that would defeat the purpose of the clean room
> implementation one can achieve with 'just looking at the specs' and not the
> LGPL source code :))
>
> Thanks again for taking care of this.
>
> Cheers,
> -s
>
>
> Andy
>
>
> On Wed, 14 Feb 2018, Sebastien Binet wrote:
>
> hi there,
>>
>> as stated in a previous email of mine, I am trying to setup a pure-Go
>> client for the XRootD protocol.
>>
>> trying to implement a dummy pure-Go server for the protocol (for testing
>> purposes) I realized the exact values for many (all!) constants
>> (kXR_DataServer, kXR_LBalServer, kXR_error, kXR_ping, ...) are not
>> specified in the protocol specifications[1].
>>
>> this prevents from implementing the protocol from first principles.
>>
>> could these values be put in the protocol specs?
>> (or, explicitly state that looking at the header holding them won't be held
>> as derived work and thus free of LGPL considerations)
>>
>> cheers,
>> -s
>>
>> [1] http://xrootd.org/doc/dev45/XRdv310.pdf
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the XROOTD-L list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=XROOTD-L&A=1
>>
>>
> ########################################################################
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the XROOTD-L list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=XROOTD-L&A=1
>

########################################################################
Use REPLY-ALL to reply to list

To unsubscribe from the XROOTD-L list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=XROOTD-L&A=1