Okay, here's some sections of the flange at different values of Z; center
of viewer is (0,0) I think - I have no idea what I'm doing but I managed
to get SLIC to display the geometry.
Looking at the Z=150 view, it looks like the photon hole is ~15 mm
(somewhat more than one crystal width) from the center, where you'd want
it to be at (150 cm)*(30 mrad) = 45 mm?
On Tue, 13 Nov 2012, Sho Uemura wrote:
> Can't verify, because I don't have any tool that can visualize the
> tessellated solid. This is the same flange (same global coordinates) that has
> been used for every SLIC simulation of electron running - beyond that I don't
> really know.
>
> On Tue, 13 Nov 2012, Maruyama, Takashi wrote:
>
>> If I send photons and beam-energy electrons at 30 mrad from the target,
>> photons would go through the photon hole and electrons the beam notch in
>> the Ecal vac chamber. Is this correct?
>>
>> -----Original Message-----
>> From: [log in to unmask]
>> [mailto:[log in to unmask]] On Behalf Of Sho Uemura
>> Sent: Tuesday, November 13, 2012 2:26 PM
>> To: hps-software
>> Subject: new detector geometry for proposal
>>
>> HPS-Proposal2014-v2 is the detector we're using. I've just corrected the
>> ECal position and added the electron flange.
>>
>> You should update hps-detectors from CVS and rerun SLIC if you have MC data
>> from the following detectors:
>>
>> HPS-Prime-Nominal-v2
>> HPS-Proposal2014-v1
>> HPS-Proposal2014-v2
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>
> ########################################################################
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|