Can you look at the log:
/home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.msg
and post relevant section? Most likely you are missing a dependency
(we DID get it to work on ubuntu 12.04 in the past, so this should
be easily solvable.). Most likely it is a missing dependency,
packages listed in qserv-install-deps-ubuntu-14.04.sh
are similar to what is needed on 12.04, so you might peak there
and see if you have these packages installed.
Jacek
On 08/01/2014 01:27 PM, Vaikunth Thukral wrote:
> Hi,
>
> I've read through some of the documentation and was working on
> installing qserv. As Kian-Tat mentioned, I used the @git* instead of
> @dev* repo and followed through the README instructions. I got stuck
> during the "eups distrib install qserv" step [1] (wall of text with
> error included below signature).
>
> In full disclosure I attempted this installation on Ubuntu 12.04 LTS and
> the dependency installation folder only had the following options for
> Ubuntu:
> qserv-install-deps-ubuntu-13.10.sh
> <http://qserv-install-deps-ubuntu-13.10.sh>
> qserv-install-deps-ubuntu-14.04.sh
> <http://qserv-install-deps-ubuntu-14.04.sh>
>
> I'm not certain if this is a dependency issue and I ran both of them,
> but though I'd mention it anyway. Any clues as to what the issue could
> be? Everything before this ran without any errors.
>
> Thanks,
> -Vaikunth
>
> [1]
> ################################################################################
>
> |eups distrib install qserv -rhttp://lsst-web.ncsa.illinois.edu/~fjammes/qserv|
>
> [ 1/27 ] antlr 2.7.7
> done.
> [ 2/27 ] doxygen 1.8.2+2 (already installed)
> done.
> [ 3/27 ] expat 2.0.1
> done.
> [ 4/27 ] libevent 2.0.16-stable
> done.
> [ 5/27 ] lua 5.1.4
> done.
> [ 6/27 ] mysql 5.1.65
> done.
> [ 7/27 ] mysqlclient 5.1.65+3
> done.
> [ 8/27 ] python master-gcbf93ab65b ...
> Using externally provided Python 2.7.5 :: Anaconda 1.8.0
> (64-bit).
> [ 8/27 ] python master-gcbf93ab65b
> done.
> [ 9/27 ] swig 2.0.12
> done.
> [ 10/27 ] xrootd 3.2.8-qsPatch5
> done.
> [ 11/27 ] zookeeper 3.4.6
> done.
> [ 12/27 ] boost 1.55.0.1+1 ...
>
> ***** error: from
> /home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.log:
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/token_ids.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/wave_config_constant.o
> common.mkdir
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer
> ...on 1100th target...
> common.mkdir
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex/aq.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_defined_grammar.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_re2c_lexer.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_re2c_lexer_str.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_predef_macros.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_grammar.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_literalgrs.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/instantiate_cpp_exprgrammar.o
> gcc.compile.c++
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/cpplexer/re2clex/cpp_re.o
> gcc.archive
> bin.v2/libs/wave/build/gcc-4.6/release/link-static/threading-multi/libboost_wave.a
> common.copy stage/lib/libboost_wave.a
> ...failed updating 2 targets...
> ...skipped 6 targets...
> ...updated 1103 targets...
> + exit -4
> eups distrib: Failed to build boost-1.55.0.1+1.eupspkg: Command:
> source /home/vaikunth/QSERV/eups/bin/setups.sh; export
> EUPS_PATH=/home/vaikunth/QSERV;
> (/home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.sh) >>
> /home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.log
> 2>&1 4>/home/vaikunth/QSERV/EupsBuildDir/Linux64/boost-1.55.0.1+1/build.msg
> exited with code 252
>
> ###########################################################################################
>
>
> On Fri, Jul 25, 2014 at 2:10 PM, Jacek Becla <[log in to unmask]
> <mailto:[log in to unmask]>> wrote:
>
> K-T
>
> Right! I'll update the trac page (I just copied & pasted
> from there, I didn't notice it got outdated).
>
> Thanks,
> Jacek
>
>
>
>
> On 07/25/2014 11:21 AM, Kian-Tat Lim wrote:
>
> Jacek and others,
>
> Please don't use dev.lsstcorp.org
> <http://dev.lsstcorp.org> for git. This is outdated and
> deprecated and will stop working in the future.
>
> I think the readme* is not completely clear about how to
> checkout qserv, (we will fix it). It is basically
>
> git repo cloning (for LSST DM users)
> git clone git://dev.lsstcorp.org/LSST/__DMS/qserv
> <http://dev.lsstcorp.org/LSST/DMS/qserv>
>
>
> The preferred URL for developers with commit access (those who have
> submitted public keys) is [log in to unmask]:LSST/DMS/__qserv
>
> git repo cloning (for external users; anonymous, read-only)
> git clone http://dev.lsstcorp.org/git/__LSST/DMS/qserv
> <http://dev.lsstcorp.org/git/LSST/DMS/qserv>
>
>
> Here, it's http://git.lsstcorp.org/LSST/__DMS/qserv
> <http://git.lsstcorp.org/LSST/DMS/qserv>
>
>
> ##############################__##############################__############
> Use REPLY-ALL to reply to list
>
> To unsubscribe from the QSERV-L list, click the following link:
> https://listserv.slac.__stanford.edu/cgi-bin/wa?__SUBED1=QSERV-L&A=1
> <https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=QSERV-L&A=1>
>
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the QSERV-L list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=QSERV-L&A=1
|