Alessandra, did you solve your problem? I think Jeremy added a fix for this?
On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>
> Actually, I can’t seem to connect to the DB at all from where I am (Fermilab). I think FNAL has SLAC cut off, somehow; they’ve always been jealous of us..I can’t get to the svn repository either. Here’s the log file for those interested:
> <foobar>
>
>
>
> On Jan 21, 2015, at 10:38 PM, Graham, Mathew Thomas <[log in to unmask]> wrote:
>
>> So there are definitely TrackerHits in your slcio file…it looks fine to me. I’ll try running some readout.
>>
>>
>> On Jan 21, 2015, at 10:23 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>
>>> hi,
>>> you can find the ap2* slcio it here:
>>>
>>> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
>>>
>>> can you try to see if you can read it properly? (and there's something in?)
>>> thanks!
>>>
>>>
>>>
>>> On Wed, 21 Jan 2015, Hansson Adrian, Per Ola wrote:
>>>
>>>> Hi,
>>>>
>>>> can you point us to the slcio file?
>>>>
>>>> On Jan 21, 2015, at 7:30 AM, Alessandra Filippi <[log in to unmask]> wrote:
>>>>
>>>>> Hi all,
>>>>> sorry for the stupid question, but I am not able to get any result in running readout simulations, whichever steering lcsim file I use, and I need some help to get going.
>>>>> I produced a .slcio file with slic on two kinds of stdhep files (ap2.2gev075mev* and Takashi's new brems-mad1.92gev*), using the slic installation at slac (old, but working - I think). I am using the HPSTestRunTracker2014-v0.lcdd geometry file.
>>>>> Then, I try to produce a readout file, using the instructions in the
>>>>> confluence "Running Readout Simulation" page (lcsim and hps_trunk
>>>>> freshly updated). All I get, with both the .slcio files and whichever HPS2014Readout*.lcsim file, is the geometry survey of SVT (I guess),
>>>>> and nothing else: the reconstruction ends with Ecal/svt setup info
>>>>>
>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: loading ECAL conditions onto subdetector Ecal
>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: building ECAL geometry channel map
>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: built ECAL geometry channel with 442 entries
>>>>> Wed Jan 21 16:19:15 CET 2015 :: EcalDetectorSetup :: INFO :: done loading ECAL conditions onto subdetector
>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: loading SVT conditions onto subdetector Tracker
>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: setting up 20 SVT sensors
>>>>> Wed Jan 21 16:19:26 CET 2015 :: SvtDetectorSetup :: INFO :: channel map has 23040 entries
>>>>> End of file reached
>>>>> Wed Jan 21 16:19:26 CET 2015 :: DatabaseConditionsManager :: INFO :: connection closed
>>>>>
>>>>> and the readout file is empty.
>>>>> If I use HPSTrackingDefaults.lcsim, again on whichever kind of slcio file, after the drivers being loaded, I get
>>>>>
>>>>> Executed dry run. No events processed!
>>>>>
>>>>> and again nothing else is done. What am I doing wrong?
>>>>> Thanks, cheers
>>>>> Alessandra
>>>>>
>>>>> ps. I wanted to inspect the slcio files to see whether they had problems, but I cannot install JAS3 for the issue mentioned in my previous e-mail.
>>>>>
>>>>> ########################################################################
>>>>> Use REPLY-ALL to reply to list
>>>>>
>>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>
>>>> ########################################################################
>>>> Use REPLY-ALL to reply to list
>>>>
>>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>>>
>>>
>>> ########################################################################
>>> Use REPLY-ALL to reply to list
>>>
>>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>>
>> ########################################################################
>> Use REPLY-ALL to reply to list
>>
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|