good... at least I am not alone ;-)
thanks for any hints you might have.
It seems it goes for a dry run by default - maybe there are some more new
parameters to pass?
number of events to be processed? something trivial like this?
On Mon, 26 Jan 2015, Graham, Mathew Thomas wrote:
>
> Yeah, I can finally verify I get the same thing. I can browse through events (w/o
> running a driver) no problem, but when I run (via command
> line) /org/hps/steering/readout/HPS2014ReadoutNoPileup.lcsim it says it sees and
> endOfData without going through events.
>
> [IMAGE]
>
> On Jan 26, 2015, at 9:38 AM, Hansson Adrian, Per Ola <[log in to unmask]> wrote:
>
>
> Hi,
>
> sorry for not being able to help much here (trying to get the SVT in shape
> for shipping). I will try to run again as well sometime today; it was
> working last week so it’ll be interesting to see.
>
> /Pelle
>
>
> On Jan 23, 2015, at 9:44 AM, Alessandra Filippi <[log in to unmask]> wrote:
>
> Hi Pelle,
> no, not yet, I am stuck...
> I have the same problem (and same behaviour) if I try to run the
> reconstruction at slac, so I doubt it could be an issue related
> to the connection to the database.
> Cheers
> Alessandra
>
>
>
>
> On Fri, 23 Jan 2015, Hansson Adrian, Per Ola wrote:
>
> Alessandra, did you solve your problem? I think
> Jeremy added a fix for this?
>
> On Jan 21, 2015, at 9:01 PM, Graham, Mathew Thomas
> <[log in to unmask]> wrote:
>
>
> Actually, I can’t seem to connect to the
> DB at all from where I am (Fermilab). I
> think FNAL has SLAC cut off, somehow;
> they’ve always been jealous of us..I
> can’t get to the svn repository either.
> Here’s the log file for those
> interested:
> <foobar>
>
>
>
> On Jan 21, 2015, at 10:38 PM, Graham,
> Mathew Thomas
> <[log in to unmask]> wrote:
>
> So there are definitely
> TrackerHits in your slcio
> file…it looks fine to me.
> I’ll try running some
> readout.
>
>
> On Jan 21, 2015, at 10:23
> AM, Alessandra Filippi
> <[log in to unmask]> wrote:
>
> hi,
> you can find the
> ap2* slcio it
> here:
>
> /nfs/slac/g/hps3/users/afilippi/hps/SCRATCH/OUT2014_v0/ap2.2gev075mev_all.slcio
>
> can you try to
> see if you can
> read it
> properly? (and
> there's
> something in?)
> thanks!
>
>
>
> On Wed, 21 Jan
> 2015, Hansson
> Adrian, Per Ola
> wrote:
>
> Hi,
>
> can
> you
> point
> us
> to
> the
> slcio
> file?
>
> On
> Jan
> 21,
> 2015,
> at
> 7:30
> AM,
> Alessandra
> Filippi
> <[log in to unmask]>
> wrote:
>
> Hi
> all,
> sorry
> for
> the
> stupid
> question,
> but
> I
> am
> not
> able
> to
> get
> any
> result
> in
> running
> readout
> simulations,
> whichever
> steering
> lcsim
> file
> I
> use,
> and
> I
> need
> some
> help
> to
> get
> going.
> I
> produced
> a
> .slcio
> file
> with
> slic
> on
> two
> kinds
> of
> stdhep
> files
> (ap2.2gev075mev*
> and
> Takashi's
> new
> brems-mad1.92gev*),
> using
> the
> slic
> installation
> at
> slac
> (old,
> but
> working
> -
> I
> think).
> I
> am
> using
> the
> HPSTestRunTracker2014-v0.lcdd
> geometry
> file.
> Then,
> I
> try
> to
> produce
> a
> readout
> file,
> using
> the
> instructions
> in
> the
> confluence
> "Running
> Readout
> Simulation"
> page
> (lcsim
> and
> hps_trunk
> freshly
> updated).
> All
> I
> get,
> with
> both
> the
> .slcio
> files
> and
> whichever
> HPS2014Readout*.lcsim
> file,
> is
> the
> geometry
> survey
> of
> SVT
> (I
> guess),
> and
> nothing
> else:
> the
> reconstruction
> ends
> with
> Ecal/svt
> setup
> info
>
> Wed
> Jan
> 21
> 16:19:15
> CET
> 2015
> ::
> EcalDetectorSetup
> ::
> INFO
> ::
> loading
> ECAL
> conditions
> onto
> subdetector
> Ecal
> Wed
> Jan
> 21
> 16:19:15
> CET
> 2015
> ::
> EcalDetectorSetup
> ::
> INFO
> ::
> building
> ECAL
> geometry
> channel
> map
> Wed
> Jan
> 21
> 16:19:15
> CET
> 2015
> ::
> EcalDetectorSetup
> ::
> INFO
> ::
> built
> ECAL
> geometry
> channel
> with
> 442
> entries
> Wed
> Jan
> 21
> 16:19:15
> CET
> 2015
> ::
> EcalDetectorSetup
> ::
> INFO
> ::
> done
> loading
> ECAL
> conditions
> onto
> subdetector
> Wed
> Jan
> 21
> 16:19:26
> CET
> 2015
> ::
> SvtDetectorSetup
> ::
> INFO
> ::
> loading
> SVT
> conditions
> onto
> subdetector
> Tracker
> Wed
> Jan
> 21
> 16:19:26
> CET
> 2015
> ::
> SvtDetectorSetup
> ::
> INFO
> ::
> setting
> up
> 20
> SVT
> sensors
> Wed
> Jan
> 21
> 16:19:26
> CET
> 2015
> ::
> SvtDetectorSetup
> ::
> INFO
> ::
> channel
> map
> has
> 23040
> entries
> End
> of
> file
> reached
> Wed
> Jan
> 21
> 16:19:26
> CET
> 2015
> ::
> DatabaseConditionsManager
> ::
> INFO
> ::
> connection
> closed
>
> and
> the
> readout
> file
> is
> empty.
> If
> I
> use
> HPSTrackingDefaults.lcsim,
> again
> on
> whichever
> kind
> of
> slcio
> file,
> after
> the
> drivers
> being
> loaded,
> I
> get
>
> Executed
> dry
> run.
> No
> events
> processed!
>
> and
> again
> nothing
> else
> is
> done.
> What
> am
> I
> doing
> wrong?
> Thanks,
> cheers
> Alessandra
>
> ps.
> I
> wanted
> to
> inspect
> the
> slcio
> files
> to
> see
> whether
> they
> had
> problems,
> but
> I
> cannot
> install
> JAS3
> for
> the
> issue
> mentioned
> in
> my
> previous
> e-mail.
>
> ########################################################################
> Use
> REPLY-ALL
> to
> reply
> to
> list
>
> To
> unsubscribe
> from
> the
> HPS-SOFTWARE
> list,
> click
> the
> following
> link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
> ########################################################################
> Use
> REPLY-ALL
> to
> reply
> to
> list
>
> To
> unsubscribe
> from
> the
> HPS-SOFTWARE
> list,
> click
> the
> following
> link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
> ########################################################################
> Use REPLY-ALL to
> reply to list
>
> To unsubscribe
> from the
> HPS-SOFTWARE
> list, click the
> following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
> ########################################################################
> Use REPLY-ALL to reply to
> list
>
> To unsubscribe from the
> HPS-SOFTWARE list, click the
> following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>
>
>
>
>
>
>
########################################################################
Use REPLY-ALL to reply to list
To unsubscribe from the HPS-SOFTWARE list, click the following link:
https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
|